Front panel Dell C6100 TY3

[Nippy 0]

Приветствую!
Нода от С6100 ТУ3 имеет на морде 12 пинов для индикации и тд.
2 Power  и 2 Res.
Может кто то подскажет остальные на что?
Спасибо!

Пункт №8

 

Відредаговано 2013-11-03 08:37:16 Nippy

[Germidar 10]

Поидее оно:

 

Front panel: (So far found)
Connector: Molex Milli-grid 2.00mm pitch 2x6pin (51110-1251)
Pin1 (red wire): PS_ON, like in normal ATX psu. Pulls down when system wants power.
Pin2: Unknown data line, looks like BMC is trying to contact fan controller etc. Out going traffic.
Pin3: Unknown(+3.3V)
Pin4: Unknown, Data in? Can't quite measure this without fan controller.
Pin5: Unknown(+3.3V)
Pin6: GND
Pin7: ID Led toggle +3.3V
Pin8: ID Led toggle, once when ID led is on this pin is pulled to 0V.
Pin9: Unknown (+3.3V)
Pin10: Unknown (0V when machine is powered on, +3.3V when off)
Pin11: Unknown (+3.3V)
Pin12: Unknown (+3.3V)

 

взял тут: http://forums.servethehome.com/processors-motherboards/2425-c6100-xs23-ty3-node-workstation-pinouts-etc.html

[Nippy 0]

не не 
Это питалово от ATX вроде как.

на 1 фото питалово это # 5 main power 

а мне нужен именно #8