Перейти до

BDCOM P3310C


Kto To

Рекомендованные сообщения

  • Відповіді 934
  • Створено
  • Остання відповідь

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Вчи українську, це тобі ще знадобиться!

Дуже схоже на "фільтр по МАС", який зявився в 3310с. ftp://ftp.romsat.ua/pub/Lan/BDCOM/P3310C/Read_before_Update.txt All mac addresses that fit the mask below will be dropped on OLT PON inte

Блин, да поставьте Вы в конце концов понконтрол и собирайте сигналы по СНМП и не мучайтесь

Posted Images


OLT-Astor-i-K#show epon interface EPON0/1:1 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 52
 supply voltage(V): 3.3
 bias current(mA): 14.4
 transmitted power(DBm): 1.9
 received power(DBm): -15.9

OLT-Astor-i-K#show epon interface EPON0/1:2 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 42
 supply voltage(V): 3.3
 bias current(mA): 14.8
 transmitted power(DBm): 1.5
 received power(DBm): -13.4

OLT-Astor-i-K#show epon interface EPON0/1:3 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 41
 supply voltage(V): 3.3
 bias current(mA): 16.8
 transmitted power(DBm): 2.0
 received power(DBm): -11.2

OLT-Astor-i-K#show epon interface EPON0/1:4 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 46
 supply voltage(V): 3.3
 bias current(mA): 16.7
 transmitted power(DBm): 1.6
 received power(DBm): -17.9

OLT-Astor-i-K#show epon interface EPON0/1:5 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 52
 supply voltage(V): 3.3
 bias current(mA): 16.0
 transmitted power(DBm): 2.2
 received power(DBm): -19.3

OLT-Astor-i-K#show epon interface EPON0/1:6 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 44
 supply voltage(V): 3.3
 bias current(mA): 16.5
 transmitted power(DBm): 1.7
 received power(DBm): -19.4

OLT-Astor-i-K#show epon interface EPON0/1:7 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 62
 supply voltage(V): 3.3
 bias current(mA): 17.7
 transmitted power(DBm): 1.6
 received power(DBm): -18.6

OLT-Astor-i-K#show epon interface EPON0/1:8 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 48
 supply voltage(V): 3.3
 bias current(mA): 15.2
 transmitted power(DBm): 1.4
 received power(DBm): -16.3

OLT-Astor-i-K#show epon interface EPON0/1:9 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 49
 supply voltage(V): 3.3
 bias current(mA): 15.5
 transmitted power(DBm): 1.5
 received power(DBm): -11.7

OLT-Astor-i-K#show epon interface EPON0/2:1 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 39
 supply voltage(V): 3.3
 bias current(mA): 19.7
 transmitted power(DBm): 1.6
 received power(DBm): -15.4

OLT-Astor-i-K#show epon interface EPON0/2:2 onu ctc optical-transceiver-diagnos
 operating temperature(degree): 39
 supply voltage(V): 3.3
 bias current(mA): 13.5
 transmitted power(DBm): 1.3
 received power(DBm): -24.8

Ссылка на сообщение
Поделиться на других сайтах

 

Та ну их нафик. Прошивать головы ревизии С надо по принципу: "Работает? Не трогай!"

 

 

 

так не работает :(

 

warnings(4) SEP 4 21:55:39 timestamp 0, window 0, threshold 0, value 0
warnings(4) SEP 4 21:55:39 Alarm LASER_ALWAYS_ON from OLT 0x03000000 port EPON0/1 pon_diID 7
warnings(4) SEP 4 21:55:39 timestamp 0, window 0, threshold 0, value 0
warnings(4) SEP 4 21:55:39 Alarm LASER_ALWAYS_ON from OLT 0x03000000 port EPON0/1 pon_diID 7
warnings(4) SEP 4 21:54:39 timestamp 0, window 0, threshold 0, value 0
warnings(4) SEP 4 21:54:39 Alarm LASER_ALWAYS_ON from OLT 0x03000000 port EPON0/1 pon_diID 7
warnings(4) SEP 4 21:54:39 timestamp 0, window 0, threshold 0, value 0
warnings(4) SEP 4 21:54:39 Alarm LASER_ALWAYS_ON from OLT 0x03000000 port EPON0/1 pon_diID 7
warnings(4) SEP 4 21:53:39 timestamp 0, window 0, threshold 0, value 0
warnings(4) SEP 4 21:53:39 Alarm LASER_ALWAYS_ON from OLT 0x03000000 port EPON0/1 pon_diID 7
warnings(4) SEP 4 21:53:39 timestamp 0, window 0, threshold 0, value 0
warnings(4) SEP 4 21:53:39 Alarm LASER_ALWAYS_ON from OLT 0x03000000 port EPON0/1 pon_diID 7

 

все перемеряли, все онушки поменяли, модуль тоже меняли....

 

config_epon 0/[x]# epon onu-always-laser-on disable 

Ссылка на сообщение
Поделиться на других сайтах

config_epon 0/[x]# epon onu-always-laser-on disable 

 

нету такой команды :(

OLT-Astor-i-K_config_epon0/1#?
  aggregator-group              -- Port aggregation configuration
  arp                           -- ARP parameters
  bandwidth                     -- Set the interface bandwidth
  cos                           -- Configure cos
  default                       -- Restore default configuration
  delay                         -- Set the interface delay
  description                   -- Set the interface description
  dhcp                          -- DHCP parameters
  dot1x                         -- IEEE 802.1X port configuration
  epon                          -- Ethernet Passive Optical System
  ether-ring                    -- Ethernet Automatic Protection Switching Configuration
  ethernet                      -- Ethernet Configuration
  exit                          -- Exit / quit
  filter                        -- Filter configuration subcommands
  flow-control                  -- Configure interface flowcontrol
  garp                          -- Config garp parameters
  gvrp                          -- Gvrp enable
  help                          -- Description of the interactive help system
  history                       -- Look up history
  i2c_init
  i2c_read
  i2c_write
  interface                     -- Interface configuration
  ip                            -- IP configuration commands
  ip-source                     -- IP source 
  ipv6                          -- IPv6 logic interface subcommands
  l2protocol-tunnel             -- Layer 2 protocols tunnel
  lldp                          -- Lldp configuration commands
  location                      -- Interface location information
  loopback-detection            -- Enable loopback-detection
  mac                           -- MAC configuration subcommands
  no                            -- Negate configuration
  pdp                           -- Pdp configuration commands
  performance-stats             -- Configure interface performance statistics
  privilege                     -- Set privilege for command
  qos                           -- Config port qos
  quit                          -- Exit / quit
  rmon                          -- Configure Remote Monitoring on an interface
  short-ifdescr                 -- Use brief name as ifDescr
  show                          -- Show configuration and status
  shutdown                      -- Shutdown the current interface
  snmp                          -- Modify SNMP interface parameters
  spanning-tree                 -- Config spanning-tree protocol on port
  storm-control                 -- Storm control configuration
  switchport                    -- Set port switching characteristics
Ссылка на сообщение
Поделиться на других сайтах

Есть кто ставил прошивку выше 33463 и у кого стабильно заработала?

На данной (33463) есть не объяснимые глюки.

Неделю назад поставил 42425. РРРоЕ бегает, конфиг не пропадает, жалоб от абонентов пока нет.

С мультикастом воюем, но на этой прошивке он хоть завёлся, на 33463 вообще работать не хотел.

Ссылка на сообщение
Поделиться на других сайтах

 

config_epon 0/[x]# epon onu-always-laser-on disable 

 

нету такой команды :(

OLT-Astor-i-K_config_epon0/1#?
  aggregator-group              -- Port aggregation configuration
  arp                           -- ARP parameters
  bandwidth                     -- Set the interface bandwidth
  cos                           -- Configure cos
  default                       -- Restore default configuration
  delay                         -- Set the interface delay
  description                   -- Set the interface description
  dhcp                          -- DHCP parameters
  dot1x                         -- IEEE 802.1X port configuration
  epon                          -- Ethernet Passive Optical System
  ether-ring                    -- Ethernet Automatic Protection Switching Configuration
  ethernet                      -- Ethernet Configuration
  exit                          -- Exit / quit
  filter                        -- Filter configuration subcommands
  flow-control                  -- Configure interface flowcontrol
  garp                          -- Config garp parameters
  gvrp                          -- Gvrp enable
  help                          -- Description of the interactive help system
  history                       -- Look up history
  i2c_init
  i2c_read
  i2c_write
  interface                     -- Interface configuration
  ip                            -- IP configuration commands
  ip-source                     -- IP source 
  ipv6                          -- IPv6 logic interface subcommands
  l2protocol-tunnel             -- Layer 2 protocols tunnel
  lldp                          -- Lldp configuration commands
  location                      -- Interface location information
  loopback-detection            -- Enable loopback-detection
  mac                           -- MAC configuration subcommands
  no                            -- Negate configuration
  pdp                           -- Pdp configuration commands
  performance-stats             -- Configure interface performance statistics
  privilege                     -- Set privilege for command
  qos                           -- Config port qos
  quit                          -- Exit / quit
  rmon                          -- Configure Remote Monitoring on an interface
  short-ifdescr                 -- Use brief name as ifDescr
  show                          -- Show configuration and status
  shutdown                      -- Shutdown the current interface
  snmp                          -- Modify SNMP interface parameters
  spanning-tree                 -- Config spanning-tree protocol on port
  storm-control                 -- Storm control configuration
  switchport                    -- Set port switching characteristics

если Б версия ,то Switch_config_epon0/1#no epon onu-always-laser-on

Ссылка на сообщение
Поделиться на других сайтах
  1. show run int g0/6 (OLT#1)
  2. show run int g0/6 (OLT#2)
  3. show run int g0/x (UPLINK OLT#1, x= номер порта)
  4. show vlan (на обоих OLT)

выложите вывод инфы данных команд - тогда можно будет что то советовать...

Ссылка на сообщение
Поделиться на других сайтах

Кто подскажет, почему при одинаковых условиях получается такое:

 

 

pion-1#show epon optical-transceiver-diagnosis interface EPON0/2:1
 interface    RxPower(dBm)
-----------  --------------
epon0/2:1    -39.9

 

 

pion-2#show epon optical-transceiver-diagnosis interface EPON0/2:1
 interface    RxPower(dBm)
-----------  --------------
epon0/2:1    -25.2

 

спасибо.

 

p.s. банально 39,9 на всех портах.

 

p.p.s. добавлю инфы

 

 

pion-1#show epon optical-transceiver-diagnosis
 interface    Temperature(degree)    Voltage(V)    Current(mA)    TxPower(dBm)
-----------  ---------------------  ------------  -------------  --------------
epon0/1      48.0                   3.3           19.9           5.2
epon0/2      48.0                   3.3           15.6           5.2
epon0/3      51.3                   3.3           15.1           5.2
epon0/4      46.7                   3.3           15.6           5.3

 

 

pion-2#show epon optical-transceiver-diagnosis
 interface    Temperature(degree)    Voltage(V)    Current(mA)    TxPower(dBm)
-----------  ---------------------  ------------  -------------  --------------
epon0/1      52.4                   3.3           39.2           6.7
epon0/2      47.4                   3.3           35.0           6.6
epon0/3      52.4                   3.3           49.4           6.3
epon0/4      34.0                   3.3           18.7           4.9

 

p.p.p.s.

проехали, gepon c++, поэтому так.

Відредаговано Darth Vader2
Ссылка на сообщение
Поделиться на других сайтах

На ромсате свежее нашел :)

 

ftp://ftp.romsat.ua/pub/Lan/BDCOM/P3310C/BD_3310C_10.1.0E_43480_en.bin

Ченджлогов нигде нет к прошивке ? Обновлять бездумно не хотелось бы

 

 P3310C Software, Version 10.1.0E Build 37276

Люди жалуются на периодическое зависание видео с разных ресурсов ( в т.ч YouTube). При том, что олт включена за другой олт P3608, с которой проблем не наблюдается, ситуация довольно странная и не ясная.

Ссылка на сообщение
Поделиться на других сайтах

Пришел к мнению, что P3310C Software, Version 10.1.0E Build 36039 - самый стабильный, по крайней мере, для меня.

Хорошо с access листами работает, правильно показывает уровни, большой аптайм (больше 90 дней без лагов и глюков), каждая онуха теплейтом отпущена до 500 Мбит/с.

Полет нормальный.

Если вдруг кому-то нужно будет, маякуйте - солью с головы. Могу даже блоб файлы слить, если кому надо.

Ссылка на сообщение
Поделиться на других сайтах
Полезные ссылки
 
ОЛТ BDCOM P3310C firmware
 
#last 11.7.2017
( Работает без проблем | dhcp, pppoe, multicast )
 
 
#old Firmware
 
 
ONU
( fix bug - 4 port switch in 10 MB some time )

 

 

BDCOM P3310C Software, Version 10.1.0D Build 33463
uptime is 486:08:41:00, The current time: 2017-9-15 19:23:2

BDCOM P3310C Software, Version 10.1.0E Build 43480
uptime is 58:08:36:42, The current time: 2017-9-15 20:20:24

Відредаговано solarbg
Ссылка на сообщение
Поделиться на других сайтах

Приехала новая голова, из коробки прошивка

P3310C Software, Version 10.1.0E Build 37276. На команду show epon optical-transceiver-diagnosis выводит только уровень сигнала пон портов, сигналы от онушек не показывает.

Ссылка на сообщение
Поделиться на других сайтах

Приехала новая голова, из коробки прошивка

P3310C Software, Version 10.1.0E Build 37276. На команду show epon optical-transceiver-diagnosis выводит только уровень сигнала пон портов, сигналы от онушек не показывает.

Перешивайтесь.

Нам тоже новая голова недавно с этой прошивкой приходила. Сразу всплыли непонятки с РРРоЕ.

Ссылка на сообщение
Поделиться на других сайтах
  • 2 weeks later...

Блин. С прошивками 42425 и 43480 вырисовалась неприятная проблема.

Приблизительно раз в сутки дёргаются все активные EPON-порты. Соответственно у абонентов 2-3 минуты нет линка.

на 33463 такого не было :(

Ссылка на сообщение
Поделиться на других сайтах

Check if that problem is to other brand onus. Like vsol for example.

This is still in the OLT rom image at the end of file:

 

------

263�0003�?�switch_name=P3608;welcome_name=EPON OLT;snmp_mcard=854;lm75_device=ON;port_map={2,0,1-4,0,16-19},{6,0,5-8,0,20-23};lang=en;blackl=8014A8,A0C6EC,&ANYK

------

 

Pay attention to - blackl=8014A8,A0C6EC

This means blacklist mac addresses starting with 80:14:A8 (VSOL) and A0:C6:EC (ShenZhen ANYK Tech).

May be this is disabled I do not know but i have problems with VSOL onus and that OLT.

1-2% packet losses or similar stuff.

 

Ссылка на сообщение
Поделиться на других сайтах

This is from the rom images of my OLT BDCOM 3608.

This is at the end of the file.

This is not the software bin but the rom bin.

So there is still code to block other vendors. It may be disabled i do not know. It may just stop

other vendors for 1-2 minutes I do not know too.

But this is bad bdcom practice.

They must focus on features and price not this crappy game...

It leads to nowhere...

Ссылка на сообщение
Поделиться на других сайтах

Hm.. I have some V-Solution ONU.

But... If they blocking this vendor, they must blocking ONLY this ventor.

In my situation all EPON-ports on OLT are making up/down, not specific ONUs. And it begins, when I upgrade firmware, yes.

Відредаговано Fallen_Grayswandir
Ссылка на сообщение
Поделиться на других сайтах

I want to excuse me for not writing in Russian. I understand perfect Russian but can not write,

so you can answer me on your language.

I am using version 43480 with BDCOM 3310C,3608 and its okay except that i have some

packet losses between 0-2% to some clients using v-sol onus. I am still investigating and

tomorrow will change v-sol onu mac address with bdcom and will confirm my theory.

BDCOM had such thing with dropping other vendors starting from version 29xxx.

They say that the stopped that practice and are trying to make open product but yeah i still

see stupids in the rom image :)

Ссылка на сообщение
Поделиться на других сайтах

I want to excuse me for not writing in Russian. I understand perfect Russian but can not write,

so you can answer me on your language.

It's ok for me. Good practice for speaking and writing in English. =)

 

 

 

I am using version 43480 with BDCOM 3310C,3608 and its okay except that i have some packet losses between 0-2% to some clients using v-sol onus. I am still investigating and tomorrow will change v-sol onu mac address with bdcom and will confirm my theory.

 

As I wrote earlier - we desided to use iptv via multicast. On 33463 it does not working at all. So I upgraded all my OLT to 42425 and to 43480. PPPoE, multicast works fine, but i see, that all EPON ports makes up/down several times a day at one time. I don't think, that problem is about locking non-BDCOM ONUs, cause on one OLT I have only p1501c1

Ссылка на сообщение
Поделиться на других сайтах

Доброго времени суток.
2 недели назад перепрошили BDCOM p3310c на новую версию прошивки BD_3310C_10.1.0E_43480_en .
И было замечено несколько (пока что) неприятных багов (если это они) , а именно : после перезагрузки абон ону ( перезагрузить по питанию) ОНУ BDCOM p1501c1 или p1501b1 подтягивают не верную конфигурация , привязка по acl , по внутренему айпи, и по других вланах. Приходиться править в ручную каждый раз.... кто то с таким сталкивался или может посоветовать в чем может быть проблема?
Заранее спасибо

Ссылка на сообщение
Поделиться на других сайтах

Создайте аккаунт или войдите в него для комментирования

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйтесь для получения аккаунта. Это просто!

Зарегистрировать аккаунт

Вхід

Уже зарегистрированы? Войдите здесь.

Войти сейчас
  • Зараз на сторінці   0 користувачів

    Немає користувачів, що переглядають цю сторінку.

  • Схожий контент

    • Від AlinaQuan
      Привіт усім!
      Сьогодні я хочу поділитися з вами деякою інформацією про PON (Passive Optical Network), а також про переваги використання GPON (Gigabit Passive Optical Network) у проектах FTTH (Fiber to the Home).
       
      PON - це технологія передачі даних, яка використовує оптичні волокна для передачі сигналів до кінцевих користувачів без необхідності використання активного обладнання на шляху. Це дозволяє зменшити витрати на енергію та обслуговування мережі.
       
      Звіт про PON мережеву архітектуру та порівняння GPON, EPON і XGSPON у вигляді таблиці зображений нижче:
       
      Однією з найпопулярніших реалізацій PON є GPON. GPON забезпечує велику пропускну здатність і високу якість обслуговування для кінцевих користувачів. У FTTH проектах використання GPON має численні переваги, такі як зменшення витрат на інфраструктуру, покращення якості послуг та забезпечення масштабованості мережі.
      У моделі GPON мережі є два основних компонента: GPON OLT (Optical Line Terminal) та GPON ONU (Optical Network Unit). GPON OLT знаходиться на стороні провайдера і забезпечує з'єднання зі структурою оптичної мережі. GPON ONU розташовується на стороні користувача і використовується для підключення до оптичної мережі.
       
      При будівництві XGSPON мережі, хоча вона забезпечує найвищу на сьогоднішній день швидкість передачі даних, пристрої XGSPON OLT та XGSPON ONU, які використовуються в ній, мають високу вартість, що не є оптимальним вибором для домашніх мереж. Таким чином, на сьогоднішній день, GPON здається найбільш вигідним рішенням для мережі!
       
      Примітка: усе це перекладено програмним забезпеченням. Ласкаво просимо вказати на це, якщо є проблеми з граматикою чи орфографією.
       
    • Від AlinaQuan
      In the world of fiber optic technology, two terms you might come across are GPON and XGSPON. But what do they mean, and how are they different? Let's dive in and explore these fascinating technologies in simple terms!
       
      What is GPON?
      GPON stands for Gigabit Passive Optical Network. It's a widely used technology for delivering high-speed internet and other services over fiber optic cables. GPON operates by splitting the fiber optic signal into multiple channels, allowing for efficient transmission of data to multiple users simultaneously. It's like having multiple lanes on a highway, ensuring smooth traffic flow even during peak hours.
       
      What is XGSPON?
      XGSPON, on the other hand, stands for 10-Gigabit-capable Passive Optical Network. As the name suggests, XGSPON takes things up a notch by offering even faster speeds than GPON. With XGSPON, data can be transmitted at speeds of up to 10 gigabits per second (Gbps), making it ideal for bandwidth-intensive applications like ultra-high-definition video streaming and virtual reality gaming.
       
      Key Differences:
      Speed: The main difference between GPON and XGSPON is the speed they offer. While GPON typically provides speeds of up to 2.5 Gbps downstream and 1.25 Gbps upstream, XGSPON can deliver speeds of up to 10 Gbps in both directions.
      Bandwidth: With its higher speed capabilities, XGSPON offers greater bandwidth for handling large amounts of data traffic. This makes it well-suited for scenarios where multiple users require ultra-fast internet access simultaneously.
      Compatibility: GPON and XGSPON are not directly compatible with each other. Upgrading from GPON to XGSPON typically requires replacing the optical line terminal (OLT) equipment at the service provider's end, as well as upgrading the customer premises equipment (CPE) such as ONUs or ONTs.
      Conclusion
       
      In summary, GPON and XGSPON are both powerful technologies for delivering high-speed internet over fiber optic networks. While GPON offers impressive speeds suitable for most residential and small business applications, XGSPON takes things to the next level with its blazing-fast speeds and increased bandwidth capacity. Whether you're streaming your favorite shows, gaming online, or running a business, these technologies pave the way for a connected future where speed knows no bounds!

       
      And there you have it – a simple breakdown of the differences between GPON and XGSPON. Keep exploring, keep innovating, and let's continue to ride the wave of fiber optic technology into the future! 🌐✨
       
      Contact Whatsapp / Viber / Wechat +86 18086327779 for more details!
    • Від Inna13
      Наша компанія має стаж роботи понад 15 років. У нас є дві форми оплати з ПДВ та ФОП, гарантія на товар. Найкращі ціни. В наявності і під замовлення. Picotel, Ubiquiti, BDCOM, C-DATA, Picotel, RCI та інші
    • Від Костопашка
      Куплю этажные боксы (аналогичные Депс и Ромсат не предлагать) 

    • Від Maks1m
      Для будівництва мережі в Києві та області потрібні бригади кабельщиків та зварювальників. 
      За додатковою інформацією прохання звертатися в особисті. 

×
×
  • Створити нове...