Перейти до

BDCOM P3310C


Kto To

Рекомендованные сообщения

подскажите, куда копать?

 

 

Включите terminal_monitor при регистрации ONU и покажите вывод.

Відредаговано Siracusa
Ссылка на сообщение
Поделиться на других сайтах
  • Відповіді 934
  • Створено
  • Остання відповідь

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Вчи українську, це тобі ще знадобиться!

Дуже схоже на "фільтр по МАС", який зявився в 3310с. ftp://ftp.romsat.ua/pub/Lan/BDCOM/P3310C/Read_before_Update.txt All mac addresses that fit the mask below will be dropped on OLT PON inte

Блин, да поставьте Вы в конце концов понконтрол и собирайте сигналы по СНМП и не мучайтесь

Posted Images

Прекрасно поддерживает

GEPON_3#show epon opt int epon0/1
 interface    Temperature(degree)    Voltage(V)    Current(mA)    TxPower(dBm)
-----------  ---------------------  ------------  -------------  --------------
epon0/1      44.3                   3.3           14.7           6.5
GEPON_3#show epon opt int epon0/2
 interface    Temperature(degree)    Voltage(V)    Current(mA)    TxPower(dBm)
-----------  ---------------------  ------------  -------------  --------------
epon0/2      43.8                   3.3           13.9           6.4
Відредаговано VitalyMoiseev
Ссылка на сообщение
Поделиться на других сайтах

поставили данное чудо в сеть, используем с онушками Fora, модули ZTE LTE3680P-BC+1, уровни -39.9dBm, есть ли решения, кроме замены модулей?

Ссылка на сообщение
Поделиться на других сайтах

А бюджет топологии своей считали? Сходится с монтажем?

конечно, классическая схема 1х8-1х8, измерителем меряем -18 - -20dBm 

Ссылка на сообщение
Поделиться на других сайтах

Всем привет из Молдовы! Недавно запустил сеть ПОН на BDCOM 3310C и как оказалось в коробке была проблемная прошивка Version 10.1.0D Build 31982 , через 2 дня работы начал переставать пропускать трафик на 20минут а то и больше. Обновился только-что до 33463. Надеюсь что отпишусь позитивно. Друзья а как у вас работает 3310C и 33463 ?

Ссылка на сообщение
Поделиться на других сайтах

Коллеги, так всё таки версия С вообще никак не поддерживает мощные модули C++ ??

уже где-то писали про то что модули PICOTEL PX20++(+6.5dBm) нормально показывают уровни.

Ссылка на сообщение
Поделиться на других сайтах

поставили данное чудо в сеть, используем с онушками Fora, модули ZTE LTE3680P-BC+1, уровни -39.9dBm, есть ли решения, кроме замены модулей?

тільки заміна модулів, наразі 3310С з модулями Step4Net SFP-20-1.25G-GEPON-OLT

Switch#show epon optical-transceiver-diagnosis
 interface    Temperature(degree)    Voltage(V)    Current(mA)    TxPower(dBm)
-----------  ---------------------  ------------  -------------  --------------
epon0/1      39.3                   3.4           8.8            4.4
epon0/2      40.9                   3.4           7.9            4.6
epon0/3      0.0                    0.0           0.0            0.0
epon0/4      0.0                    0.0           0.0            0.0
 interface    RxPower(dBm)
-----------  --------------
epon0/1:1    -11.7

Відредаговано Schultz
Ссылка на сообщение
Поделиться на других сайтах

Коллеги, так всё таки версия С вообще никак не поддерживает мощные модули C++ ??

модули маркировки В+ С+ С++ нет (это гпон модули, но прекрасно работали в ОЛТ версии В и с Епоном) в Олтах версии С будут корректно работать модули маркировки PX20 (epon модули), т.е. PX20 PX20+ PX20++ по идее любого производителя. 

Ссылка на сообщение
Поделиться на других сайтах

Всем привет из Молдовы! Недавно запустил сеть ПОН на BDCOM 3310C и как оказалось в коробке была проблемная прошивка Version 10.1.0D Build 31982 , через 2 дня работы начал переставать пропускать трафик на 20минут а то и больше. Обновился только-что до 33463. Надеюсь что отпишусь позитивно. Друзья а как у вас работает 3310C и 33463 ?

Последняя актуальная для P3310C ftp://ftp.romsat.ua/pub/Lan/BDCOM/P3310C/BD_3310C_10.1.0E_36039_en.bin

Ссылка на сообщение
Поделиться на других сайтах

 

Всем привет из Молдовы! Недавно запустил сеть ПОН на BDCOM 3310C и как оказалось в коробке была проблемная прошивка Version 10.1.0D Build 31982 , через 2 дня работы начал переставать пропускать трафик на 20минут а то и больше. Обновился только-что до 33463. Надеюсь что отпишусь позитивно. Друзья а как у вас работает 3310C и 33463 ?

Последняя актуальная для P3310C ftp://ftp.romsat.ua/pub/Lan/BDCOM/P3310C/BD_3310C_10.1.0E_36039_en.bin

 

Спасибо! Пока 28 часов летаем на 33463 всё ок, но для страховки скачал и 36039, через день-два посмотрим если что-то не то, обновлюсь ...

Еще жду от вас отзывы по поводу 33463, и конечно 36039 ;)

Ссылка на сообщение
Поделиться на других сайтах

Для того чтоб все работало по феншую -сам модуль должен поддерживать отображение уровней сигналов

Не факт)))) модулі, які чудово працювали на 3310B, на оновленому не працюють коректно
Ссылка на сообщение
Поделиться на других сайтах

Добрый день.

 

У меня возникла  следующия проблема после замены OLT BDCOM P3310B на P3310C Version 10.1.0D Build 33463

не работаю клиенты с onu BDCOM 1005 4 портовой. А клиенты 1 портовыми onu работают нормаль.
Клиенты работаю по дхцп. Настройки получают. Но после получения настроек никуда выйти не могут. После замени ONU на 1 портовую все работает нормально.
До замены OLT все работало нормально.

 

ОНУШКИ:

 

 0/1:5 onu ctc basic-info

ONU Vender ID : BDCM
ONU MODEL ID : 1005
ONU ID : fcfa.f7d8.c347
Hardware Version : B0
Software Version : 10.0.16A 1023
Firmware Version : 0x0006000f00010007
Chipset Vendor ID : CS
Chipset MODEL ID : 0x8032
Chipset Revision : 160
Chipset Date : 11/01/29
Onu type : SFU
Support multillid : Not supported
Protection type : Not supported
Number of Pon : 1
Number of slot : 0
Support 1 types of port:
Number of FE port : 4
Battery Backup : 0



Switch#sh epon interface ePON 0/1:4 onu ctc basic-info
ONU Vender ID : BDCM
ONU MODEL ID : 151C
ONU ID : fcfa.f716.e496
Hardware Version : A0
Software Version : 10.0.17A 1017
Firmware Version : 0x0006000f00010006
Chipset Vendor ID : CS
Chipset MODEL ID : 0x8032
Chipset Revision : 160
Chipset Date : 11/01/29
Onu type : SFU
Support multillid : Not supported
Protection type : Not supported
Number of Pon : 1
Number of slot : 0
Support 1 types of port:
Number of GE port : 1
Battery Backup : 0
 

Конфиг OLT: 

Current configuration:
!
!version 10.1.0D build 33463
service timestamps log date
service timestamps debug date
logging source-interface VLAN1105
logging x.x.x.x
logging buffered 4096
logging buffered informational
logging facility daemon
!
port-protected 1
!
!
!
!
ip default-gateway x.x.x.x
!
!
no spanning-tree
!
!
!
!
!
!
!
!
!
!
epon dba hardware cycletime 25000 discovery-frequence 60 discovery-length 1024
!
aaa authentication login default local
aaa authentication enable default enable
!
username duty password 0 support
!
enable password 0 bdcom level 15
!
 
epon oam-version 1 0x21
epon oam-version 2 0x20
!
epon onu-config-template T1
 cmd-sequence 1 epon onu all-port ctc vlan mode tag 102
 cmd-sequence 2 epon onu all-port loopback detect
!
!
!!slot 0 89
interface GigaEthernet0/1
 shutdown
!
interface GigaEthernet0/2
 shutdown
!
interface GigaEthernet0/3
 switchport trunk vlan-allowed 102,1105
 switchport mode trunk
  dhcp snooping trust
  arp inspection trust
  ip-source trust
!
interface GigaEthernet0/4
 switchport trunk vlan-allowed 102,1105
 switchport mode trunk
  dhcp snooping trust
  arp inspection trust
  ip-source trust
!
interface GigaEthernet0/5
 shutdown
!
interface GigaEthernet0/6
 shutdown
!
interface EPON0/1
 epon pre-config-template T1 binded-onu-llid 1-64
 epon bind-onu mac 8014.a805.5728 1
 epon bind-onu mac c83a.35b2.bfdb 2
 epon bind-onu mac fcfa.f7d8.b97f 3
 epon bind-onu mac fcfa.f716.e496 4
 epon bind-onu mac fcfa.f7d8.c347 5
 epon bind-onu mac 8014.a805.55f8 6
 epon bind-onu mac 8014.a805.57f0 7
 epon bind-onu mac fcfa.f716.e008 8
 epon bind-onu mac 8014.a805.5730 9
 epon bind-onu mac fcfa.f7d8.b971 10
 epon bind-onu mac fcfa.f716.e588 11
 epon bind-onu mac fcfa.f7c5.9520 12
 epon bind-onu mac 8014.a805.57c8 13
 epon bind-onu mac fcfa.f7d8.c23d 14
 
 switchport trunk vlan-allowed 102
 switchport mode trunk
 switchport protected 1
!
interface EPON0/1:1
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:2
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:3
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
interface EPON0/1:4
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:5
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
interface EPON0/1:6
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:7
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:8
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:9
!
interface EPON0/1:10
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
interface EPON0/1:11
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:12
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:13
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:14
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
 
!
 
 
!
!!slot end
!
interface VLAN1105
 ip address x.x.x.x. 
!
!
!
vlan 1,102,1105
!         
!
!
!
ip dhcp-relay snooping
ip dhcp-relay snooping vlan  102
ip arp inspection vlan  102
ip verify source vlan  102
ip dhcp-relay snooping information option format hn-type
!
!
ip http server
!
!
!
 
!
!
time-zone Kyiv 3 0
ntp server x.x.x.x
ntp server x.x.x.x
!
!Pending configurations for absent linecards:
!
!No configurations pending global
Ссылка на сообщение
Поделиться на других сайтах

это не глюк и не фича ,включите логинг в консоли и будет вам счастье 

 

"Не факт)))) модулі, які чудово працювали на 3310B, на оновленому не працюють коректно "

про то речь и идет в 3310б сигнал просто калькулировался олтом а не фактически снимался с модуля а на 3310с идет запрос фактического сигнал на сфп модуле 

Ссылка на сообщение
Поделиться на других сайтах

 

Кто нибудь победил?
 

прекрасно работает:


GEPON_3#show ntp status

Time-zone: GMT+3:00, tz
Current time: 2016-06-21 18:35:18

Clock Status: synchronized
Clock Stratum: 3
Leap Indicator: 0
Reference ID: 192.168.111.10
Clock Jitter: 0.000508
Clock Precision: -7
Clock Offset: -71.459 ms
Root Delay: 18.860 ms
Root Dispersion: 101.896 ms
Query Interval: 10 s
Packets Sent: 104610
Packets Received: 104587 (bad version: 0)
Reference Time: 2016-06-21 18:35:09
Last Update Time: 2016-06-21 17:03:09

GEPON_3#show ntp associations

 ip address      reference clock  st  poll   reach  delay   offset   dispersion
-------------------------------------------------------------------------------
 192.168.111.1   31.28.161.68     2   64     377    7.81    -71.73   7.9
*192.168.111.10  31.28.161.68     2   64     377    7.81    -70.84   7.9
-------------------------------------------------------------------------------
Notes: * system peer(master), poll(s), delay(ms), offset(ms), dispersion(ms)

Total Associations: 2

В продовження теми.

Літній час.

 

olt01.test_config#summer-time EEST periodical week start 03:00 03 last sunday end 04:00 10 last sunday 60

 

show runn

.......

summer-time EEST periodical week start 03:00 03 last sunday end 04:00 10 last sunday

.......

 

Тобто в командній строці оффсет можна задати, а в конфігурації воно тупо не відображається і відповідно годинник відстає на годину.

 

Як побороти?

Ссылка на сообщение
Поделиться на других сайтах

 

Добрый день.

 

У меня возникла  следующия проблема после замены OLT BDCOM P3310B на P3310C Version 10.1.0D Build 33463

не работаю клиенты с onu BDCOM 1005 4 портовой. А клиенты 1 портовыми onu работают нормаль.

Клиенты работаю по дхцп. Настройки получают. Но после получения настроек никуда выйти не могут. После замени ONU на 1 портовую все работает нормально.

До замены OLT все работало нормально.

 

ОНУШКИ:

 

 0/1:5 onu ctc basic-info

ONU Vender ID : BDCM

ONU MODEL ID : 1005

ONU ID : fcfa.f7d8.c347

Hardware Version : B0

Software Version : 10.0.16A 1023

Firmware Version : 0x0006000f00010007

Chipset Vendor ID : CS

Chipset MODEL ID : 0x8032

Chipset Revision : 160

Chipset Date : 11/01/29

Onu type : SFU

Support multillid : Not supported

Protection type : Not supported

Number of Pon : 1

Number of slot : 0

Support 1 types of port:

Number of FE port : 4

Battery Backup : 0

 

 

 

Switch#sh epon interface ePON 0/1:4 onu ctc basic-info

ONU Vender ID : BDCM

ONU MODEL ID : 151C

ONU ID : fcfa.f716.e496

Hardware Version : A0

Software Version : 10.0.17A 1017

Firmware Version : 0x0006000f00010006

Chipset Vendor ID : CS

Chipset MODEL ID : 0x8032

Chipset Revision : 160

Chipset Date : 11/01/29

Onu type : SFU

Support multillid : Not supported

Protection type : Not supported

Number of Pon : 1

Number of slot : 0

Support 1 types of port:

Number of GE port : 1

Battery Backup : 0

 

Конфиг OLT: 

Current configuration:
!
!version 10.1.0D build 33463
service timestamps log date
service timestamps debug date
logging source-interface VLAN1105
logging x.x.x.x
logging buffered 4096
logging buffered informational
logging facility daemon
!
port-protected 1
!
!
!
!
ip default-gateway x.x.x.x
!
!
no spanning-tree
!
!
!
!
!
!
!
!
!
!
epon dba hardware cycletime 25000 discovery-frequence 60 discovery-length 1024
!
aaa authentication login default local
aaa authentication enable default enable
!
username duty password 0 support
!
enable password 0 bdcom level 15
!
 
epon oam-version 1 0x21
epon oam-version 2 0x20
!
epon onu-config-template T1
 cmd-sequence 1 epon onu all-port ctc vlan mode tag 102
 cmd-sequence 2 epon onu all-port loopback detect
!
!
!!slot 0 89
interface GigaEthernet0/1
 shutdown
!
interface GigaEthernet0/2
 shutdown
!
interface GigaEthernet0/3
 switchport trunk vlan-allowed 102,1105
 switchport mode trunk
  dhcp snooping trust
  arp inspection trust
  ip-source trust
!
interface GigaEthernet0/4
 switchport trunk vlan-allowed 102,1105
 switchport mode trunk
  dhcp snooping trust
  arp inspection trust
  ip-source trust
!
interface GigaEthernet0/5
 shutdown
!
interface GigaEthernet0/6
 shutdown
!
interface EPON0/1
 epon pre-config-template T1 binded-onu-llid 1-64
 epon bind-onu mac 8014.a805.5728 1
 epon bind-onu mac c83a.35b2.bfdb 2
 epon bind-onu mac fcfa.f7d8.b97f 3
 epon bind-onu mac fcfa.f716.e496 4
 epon bind-onu mac fcfa.f7d8.c347 5
 epon bind-onu mac 8014.a805.55f8 6
 epon bind-onu mac 8014.a805.57f0 7
 epon bind-onu mac fcfa.f716.e008 8
 epon bind-onu mac 8014.a805.5730 9
 epon bind-onu mac fcfa.f7d8.b971 10
 epon bind-onu mac fcfa.f716.e588 11
 epon bind-onu mac fcfa.f7c5.9520 12
 epon bind-onu mac 8014.a805.57c8 13
 epon bind-onu mac fcfa.f7d8.c23d 14
 
 switchport trunk vlan-allowed 102
 switchport mode trunk
 switchport protected 1
!
interface EPON0/1:1
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:2
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:3
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
interface EPON0/1:4
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:5
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
interface EPON0/1:6
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:7
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:8
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:9
!
interface EPON0/1:10
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
interface EPON0/1:11
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:12
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 1 loopback detect
!
interface EPON0/1:13
  epon onu port 1 ctc vlan mode tag 102
!
interface EPON0/1:14
  epon onu port 1 ctc vlan mode tag 102
  epon onu port 2 ctc vlan mode tag 102
  epon onu port 3 ctc vlan mode tag 102
  epon onu port 4 ctc vlan mode tag 102
  epon onu port 1 loopback detect
  epon onu port 2 loopback detect
  epon onu port 3 loopback detect
  epon onu port 4 loopback detect
!
 
!
 
 
!
!!slot end
!
interface VLAN1105
 ip address x.x.x.x. 
!
!
!
vlan 1,102,1105
!         
!
!
!
ip dhcp-relay snooping
ip dhcp-relay snooping vlan  102
ip arp inspection vlan  102
ip verify source vlan  102
ip dhcp-relay snooping information option format hn-type
!
!
ip http server
!
!
!
 
!
!
time-zone Kyiv 3 0
ntp server x.x.x.x
ntp server x.x.x.x
!
!Pending configurations for absent linecards:
!
!No configurations pending global

 

 

Как понимать "никуда выйти не могут"?

 

Проведите пошаговую диагностику:

 

MAC-адреса от абонентов видите?

show mac address-table

Если Вы говорите, что абонент получает настройки, то от абонента шлюз по умолчанию пингуется? C шлюза самого абонента пингуете?

 

На форуме есть темы, где подобные глюки лечаться апгрейдом прошивки ONU.

Ссылка на сообщение
Поделиться на других сайтах

Стоял модуль С++ (+6.5 дб): ону видела голову с правильным сигналом (-18.5 дб), а OLT -39.9 (обговаривалось уже выше)

 

Поставил по советам колег PX20++ (+6.5 дб): ону по-прежнему видит olt с тем же сигналом (-18.5 дб), а вот OLT видит ону с сигналом -11 дб, что есть неверное значение

 

Получается оба модуля неадекватно показывают сигналы от ону к голове, который должен быть около -23.5 дб

 

P.S. по работе оба типа модуля работали несколько дней нормально

Ссылка на сообщение
Поделиться на других сайтах

Создайте аккаунт или войдите в него для комментирования

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйтесь для получения аккаунта. Это просто!

Зарегистрировать аккаунт

Вхід

Уже зарегистрированы? Войдите здесь.

Войти сейчас
  • Зараз на сторінці   0 користувачів

    Немає користувачів, що переглядають цю сторінку.

  • Схожий контент

    • Від AlinaQuan
      An ONU with a CATV port serves as a gateway for IPTV services. It connects the fiber optic network to the user's premises, allowing the delivery of television content over the internet protocol. The CATV port enables the reception of television signals, which can be distributed to TVs within the home via traditional coaxial cables.
       
      And the VOIP port on an ONU facilitates Voice over Internet Protocol (VOIP) services. It enables the transmission of voice calls over the internet, converting analog voice signals into digital data packets that can be transmitted over the network. This port allows users to make phone calls using their internet connection instead of traditional telephone lines.
       
      Here, Exw Shenzhen 1600UAH (Shipping cost and tariff not included) you will get a WIFI 6 ONU with CATV, VOIP, USB port!
       
       
      For whole price, just contact viber/whatsapp/wechat by +8618086327779 for more details!
       
    • Від AlinaQuan
      Привіт усім!
      Сьогодні я хочу поділитися з вами деякою інформацією про PON (Passive Optical Network), а також про переваги використання GPON (Gigabit Passive Optical Network) у проектах FTTH (Fiber to the Home).
       
      PON - це технологія передачі даних, яка використовує оптичні волокна для передачі сигналів до кінцевих користувачів без необхідності використання активного обладнання на шляху. Це дозволяє зменшити витрати на енергію та обслуговування мережі.
       
      Звіт про PON мережеву архітектуру та порівняння GPON, EPON і XGSPON у вигляді таблиці зображений нижче:
       
      Однією з найпопулярніших реалізацій PON є GPON. GPON забезпечує велику пропускну здатність і високу якість обслуговування для кінцевих користувачів. У FTTH проектах використання GPON має численні переваги, такі як зменшення витрат на інфраструктуру, покращення якості послуг та забезпечення масштабованості мережі.
      У моделі GPON мережі є два основних компонента: GPON OLT (Optical Line Terminal) та GPON ONU (Optical Network Unit). GPON OLT знаходиться на стороні провайдера і забезпечує з'єднання зі структурою оптичної мережі. GPON ONU розташовується на стороні користувача і використовується для підключення до оптичної мережі.
       
      При будівництві XGSPON мережі, хоча вона забезпечує найвищу на сьогоднішній день швидкість передачі даних, пристрої XGSPON OLT та XGSPON ONU, які використовуються в ній, мають високу вартість, що не є оптимальним вибором для домашніх мереж. Таким чином, на сьогоднішній день, GPON здається найбільш вигідним рішенням для мережі!
       
      Примітка: усе це перекладено програмним забезпеченням. Ласкаво просимо вказати на це, якщо є проблеми з граматикою чи орфографією.
       
    • Від AlinaQuan
      In the world of fiber optic technology, two terms you might come across are GPON and XGSPON. But what do they mean, and how are they different? Let's dive in and explore these fascinating technologies in simple terms!
       
      What is GPON?
      GPON stands for Gigabit Passive Optical Network. It's a widely used technology for delivering high-speed internet and other services over fiber optic cables. GPON operates by splitting the fiber optic signal into multiple channels, allowing for efficient transmission of data to multiple users simultaneously. It's like having multiple lanes on a highway, ensuring smooth traffic flow even during peak hours.
       
      What is XGSPON?
      XGSPON, on the other hand, stands for 10-Gigabit-capable Passive Optical Network. As the name suggests, XGSPON takes things up a notch by offering even faster speeds than GPON. With XGSPON, data can be transmitted at speeds of up to 10 gigabits per second (Gbps), making it ideal for bandwidth-intensive applications like ultra-high-definition video streaming and virtual reality gaming.
       
      Key Differences:
      Speed: The main difference between GPON and XGSPON is the speed they offer. While GPON typically provides speeds of up to 2.5 Gbps downstream and 1.25 Gbps upstream, XGSPON can deliver speeds of up to 10 Gbps in both directions.
      Bandwidth: With its higher speed capabilities, XGSPON offers greater bandwidth for handling large amounts of data traffic. This makes it well-suited for scenarios where multiple users require ultra-fast internet access simultaneously.
      Compatibility: GPON and XGSPON are not directly compatible with each other. Upgrading from GPON to XGSPON typically requires replacing the optical line terminal (OLT) equipment at the service provider's end, as well as upgrading the customer premises equipment (CPE) such as ONUs or ONTs.
      Conclusion
       
      In summary, GPON and XGSPON are both powerful technologies for delivering high-speed internet over fiber optic networks. While GPON offers impressive speeds suitable for most residential and small business applications, XGSPON takes things to the next level with its blazing-fast speeds and increased bandwidth capacity. Whether you're streaming your favorite shows, gaming online, or running a business, these technologies pave the way for a connected future where speed knows no bounds!

       
      And there you have it – a simple breakdown of the differences between GPON and XGSPON. Keep exploring, keep innovating, and let's continue to ride the wave of fiber optic technology into the future! 🌐✨
       
      Contact Whatsapp / Viber / Wechat +86 18086327779 for more details!
    • Від Inna13
      Наша компанія має стаж роботи понад 15 років. У нас є дві форми оплати з ПДВ та ФОП, гарантія на товар. Найкращі ціни. В наявності і під замовлення. Picotel, Ubiquiti, BDCOM, C-DATA, Picotel, RCI та інші
    • Від Костопашка
      Куплю этажные боксы (аналогичные Депс и Ромсат не предлагать) 


×
×
  • Створити нове...