Dell Powerconnect 8024F инициализация
Первое включение свитча. Настройка адреса и доступа.
 
Boot Menu 3.1.4.5
CPU Card ID:   0x10508548
CFI Probe: Found x16 device in x16 mode
/DskVol//  - disk check in progress ...
/DskVol//  - Volume is OK                                                                                           

          total # of clusters:  15,312
           # of free clusters:  5,859
            # of bad clusters:  0
             total free space:  11,718 Kb
    max contiguous free space:  11,999,232 bytes
                   # of files:  28
                 # of folders:  1
         total bytes in files:  18,874 Kb
             # of lost chains:  0
   total bytes in lost chains:  0

volume descriptor ptr (pVolDesc):    0x3cab5f0
XBD device block I/O handle: 0x10001
auto disk check on mount:      DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode:         copyback (DOS_WRITE)
max # of simultaneously open files:    52
file descriptors in use:       0
# of different files in use:       0
# of descriptors for deleted files:    0
# of  obsolete descriptors:        0

current volume configuration:
 - volume label:    NO LABEL ; (in boot sector:              )
 - volume Id:       0xf6
 - total number of sectors:   61,376
 - bytes per sector:     512
 - # of sectors per cluster: 4
 - # of reserved sectors:    1
 - FAT entry size:      FAT16
 - # of sectors per FAT copy:    60
 - # of FAT table copies:   2
 - # of hidden sectors:      4
 - first cluster is in sector #  136
 - Update last access date for open-read-close = FALSE
 - directory structure:         VFAT
 - file name format:            8-bit (extended-ASCII)
 - root dir start sector:               121
 - # of sectors per root:               15
 - max # of entries in root:            240

FAT handler information:
------------------------
 - allocation group size:       2 clusters
 - free space on volume:        11,999,232 bytes


Boot Menu 3.1.4.5

Select an option. If no selection in 10 seconds then
operational code will start.

1 - Start operational code.
2 - Start Boot Menu.
Select (1, 2):

Operational Code Date: Wed May  5 00:58:31 2010
Uncompressing.....

Host Name: bootHost 
Target Name: vxTarget 
User: target 
usrNetIpAttachCommon: unknown network device

Adding 70479 symbols for standalone.
 CPU: Freescale E500 : Unknown system version.  Processor #0.
 Memory Size: 0x40000000.  BSP version 2.0/2.
 Created: May  5 2010, 00:01:39
 ED&R Policy Mode: deployed
remLib: Not initialized.
remLib: Not initialized.
CFI Probe: Found x16 device in x16 mode
/DskVol//  - disk check in progress ...
/DskVol//  - Volume is OK                                                                                           

          total # of clusters:  15,312
           # of free clusters:  5,859
            # of bad clusters:  0
             total free space:  11,718 Kb
    max contiguous free space:  11,999,232 bytes
                   # of files:  28
                 # of folders:  1
         total bytes in files:  18,874 Kb
             # of lost chains:  0
   total bytes in lost chains:  0

volume descriptor ptr (pVolDesc):    0x545ddc0
XBD device block I/O handle: 0x10001
auto disk check on mount:      DOS_CHK_REPAIR |DOS_CHK_VERB_2
volume write mode:         copyback (DOS_WRITE)
max # of simultaneously open files:    52
file descriptors in use:       0
# of different files in use:       0
# of descriptors for deleted files:    0
# of  obsolete descriptors:        0

current volume configuration:
 - volume label:    NO LABEL ; (in boot sector:              )
 - volume Id:       0xf6
 - total number of sectors:   61,376
 - bytes per sector:     512
 - # of sectors per cluster: 4
 - # of reserved sectors:    1
 - FAT entry size:      FAT16
 - # of sectors per FAT copy:    60
 - # of FAT table copies:   2
 - # of hidden sectors:      4
 - first cluster is in sector #  136
 - Update last access date for open-read-close = FALSE
 - directory structure:         VFAT
 - file name format:            8-bit (extended-ASCII)
 - root dir start sector:               121
 - # of sectors per root:               15
 - max # of entries in root:            240

FAT handler information:
------------------------
 - allocation group size:       2 clusters
 - free space on volume:        11,999,232 bytes


PCI unit 0: Dev 0xb820, Rev 0x11, Chip BCM56820_B0, Driver BCM56820_A0
SOC unit 0 attached to PCI device BCM56820_B0

Adding BCM transport pointers
Configuring CPUTRANS TX
Configuring CPUTRANS RX
hpc - No stack ports. Starting in stand-alone mode.

<186> FEB 10 20:53:06 0.0.0.0-1 UNKN[1073741088]: bootos.c(209) 1 % Event(0xaaaaaaaa)
Instantiating RamCP: as rawFs,  device = 0x20001
Formatting RamCP: for DOSFS
Instantiating RamCP: as rawFs, device = 0x20001
RamCP:/  - disk check in progress ...
RamCP:/  - Volume is OK     

          total # of clusters:  1,975
           # of free clusters:  1,973
            # of bad clusters:  0
             total free space:  1,010,176
    max contiguous free space:  1,010,176 bytes
                   # of files:  0
                 # of folders:  0
         total bytes in files:  0
             # of lost chains:  0
   total bytes in lost chains:  0
OK.

(Unit 1 - Waiting to select management unit)>

Applying Global configuration, please wait ...

Applying Interface configuration, please wait ...

Первым делом ставится айпишник и настраивается доступ
У меня VLAN 77 для железяк.

Все VLAN должны быть созданы через vlan database.
console(config)#vlan database 

console(config-vlan)#vlan ?

association              Configure associations to VLANs.
makestatic               Change the VLAN type from 'Dynamic' to 'Static'.
              Configure list of VLAN IDs lying in the range
                         <1-4093>.

console(config-vlan)#vlan 77
console#show ip interface         

Management Interface:

IP Address..................................... 192.168.77.241
Subnet Mask.................................... 255.255.255.0
Default Gateway................................ 192.168.77.1
Burned In MAC Address.......................... 5C26.0AA3.1FF5
Network Configuration Protocol Current......... None
Management VLAN ID............................. 77

Routing Interfaces:
                                             Netdir   Multi    
Interface    IP Address      IP Mask         Bcast    CastFwd  
----------   --------------- --------------- -------- --------

Устанавливает адрес через конфиг
console(config)#ip address ?

bootp                    Set the protocol to bootp.
dhcp                     Set the protocol to dhcp.
none                     Set the protocol to none.
vlan                     Configure the Management VLAN ID of the switch.
              Specify an IP address in  A.B.C.D format.

Ставится адрес, маска и необходимый влан.

Маршрут ставится так
console(config)#ip default-gateway ?

             Specify the IP address of gateway.

Создается access-list:
management access-list "management"
permit ip-source 192.168.77.0 mask 255.255.255.0 vlan 77 service telnet
permit ip-source 192.168.77.0 mask 255.255.255.0 vlan 77 service ssh
permit ip-source 192.168.77.0 mask 255.255.255.0 vlan 77 service http
permit ip-source 192.168.77.0 mask 255.255.255.0 vlan 77 service https
permit ip-source 192.168.77.0 mask 255.255.255.0 vlan 77 service snmp

Применяется к классу
management access-class management

Для внесения изменений в список, надо выключать класс
no management access-class и потом включать заново, либо просто создавать новый список и назначать его

При включении HTTPS сервера выдает ошибку, т.к. нету сертификата.
console(config)#ip https certificate ?
<1 - 2>                  Instance of the certificate to be activated.
console(config)#ip https certificate 1
Error: Could not activate the specified Certificate.

Нужно загрузить или сгенерировать сертификат
console(config)#crypto certificate 1 ?
generate                 Generate certificate for HTTPS
import                   Import a certificate signed by a Certification
                         Authority for HTTPS.

console(config)#crypto certificate 1 generate ?
                     Press enter to execute the command.
console(config)#crypto certificate 1 generate 
console(config-crypto-cert)#?
common-name              Specifies the common name. 
country                  Specifies the country name.
duration                 Specifies number of days a self-signed certification
                         would be valid. If unspecified defaults to 365 day.
email                    Specifies the contact email address.
exit                     To exit from the mode.
key-generate             Regenerate SSL RSA key.
location                 Specifies the location or city name.
organization-name        Specifies the organization name
organization-unit        Specifies the organization internal unit
state                    Specifies the state or province name.

 
Ви маєте увійти під своїм обліковим записом

loading