Squid Неонятные ошибки.

[koly68 0]

Толкните в правильном направлении. FreeBSD 5.5 на ней крутится прозрачный squid dhcpd startgazer natd bind. Все прекрасно работает но в логах сквида ошибки

parseHttpRequest: NAT open failed: (2) No such file or directory.

squid 2.5.14. IPFW настроен вроде правильно.

[Serjio 19]

смотри dmesg

[koly68 0]

смотри dmesg

dmesg чист кроме системных сообщений ничего нет.

 

Концовка

 

 

FreeBSD 6.2-RELEASE (NPLGUA) #3: Sat Jun 16 08:39:20 EEST 2007

 

Welcome to FreeBSD!

 

 

uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1

uhub1: 8 ports with 8 removable, self powered

pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0

pci1: <ACPI PCI bus> on pcib1

rl0: <RealTek 8139 10/100BaseTX> port 0xcc00-0xccff mem 0xfe4ff000-0xfe4ff0ff irq 16 at device 6.0 on pci1

miibus0: <MII bus> on rl0

rlphy0: <RealTek internal media interface> on miibus0

rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

rl0: Ethernet address: 00:02:44:bf:65:35

rl1: <RealTek 8139 10/100BaseTX> port 0xc800-0xc8ff mem 0xfe4fe000-0xfe4fe0ff irq 17 at device 7.0 on pci1

miibus1: <MII bus> on rl1

rlphy1: <RealTek internal media interface> on miibus1

rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

rl1: Ethernet address: 00:02:44:bf:83:99

atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 6.0 on pci0

ata0: <ATA channel 0> on atapci0

ata1: <ATA channel 1> on atapci0

nfe0: <NVIDIA nForce MCP61 Networking Adapter> port 0xec00-0xec07 mem 0xfecfd000-0xfecfdfff irq 23 at device 7.0 on pci0

miibus2: <MII bus> on nfe0

rlphy2: <RTL8201L 10/100 media interface> on miibus2

rlphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto

nfe0: Ethernet address: 00:04:61:34:53:25

nfe0: [FAST]

atapci1: <GENERIC ATA controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xfecfc000-0xfecfcfff irq 20 at device 8.0 on pci0

ata2: <ATA channel 0> on atapci1

ata3: <ATA channel 1> on atapci1

pcib2: <ACPI PCI-PCI bridge> at device 9.0 on pci0

pci2: <ACPI PCI bus> on pcib2

pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0

pci3: <ACPI PCI bus> on pcib3

pcib4: <ACPI PCI-PCI bridge> at device 12.0 on pci0

pci4: <ACPI PCI bus> on pcib4

pci0: <display, VGA> at device 13.0 (no driver attached)

acpi_tz0: <Thermal Zone> on acpi0

fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0

fdc0: [FAST]

sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0

sio0: type 16550A

sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0

sio1: type 16550A

atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0

atkbd0: <AT Keyboard> irq 1 on atkbdc0

kbd0 at atkbd0

atkbd0: [GIANT-LOCKED]

pmtimer0 on isa0

ppc0: parallel port not found.

sc0: <System console> at flags 0x100 on isa0

sc0: VGA <16 virtual consoles, flags=0x300>

vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0

Timecounter "TSC" frequency 1607416751 Hz quality 800

Timecounters tick every 1.000 msec

ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to deny, logging limited to 10 packets/entry by default

ad6: 76319MB <WDC WD800AAJS-00PSA0 05.06H05> at ata3-master UDMA33

Trying to mount root from ufs:/dev/ad6s1a

rl0: link state changed to UP

rl1: link state changed to UP