Jump to content

сессия

fix3r

By fix3r
in Abills

 Share

Recommended Posts

fix3r Пролетал Мимо

fix3r

Posted
Posted

Народ помогите новичку, поставил abills, настроил pppoe-server, все работает на компьютере хорошо, когда подключаю маршрутизатор, не поднимает сессию, смотрю логи пиши что сессия поднялась на 10 сек

 

 

 

info: ppp0:  [0;39msend [RADIUS(1) Accounting-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "00:1a:4b:90:3e:3b"> <Called-Station-Id "ec:a8:6b:f7:e4:8a"> <Acct-Status-Type Start> <Acct-Authentic RADIUS> <Acct-Session-Id "1534ee7faeb1c2be"> <Acct-Session-Time 0> <Acct-Input-Octets 0> <Acct-Output-Octets 0> <Acct-Input-Packets 0> <Acct-Output-Packets 0> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 172.20.0.81>]

[1;32m[2017-03-11 21:14:59]:  info: ppp0: [0;39mrecv [RADIUS(1) Accounting-Response id=1]
[1;34m[2017-03-11 21:14:59]: debug: ppp0: [0;39mpppoe: ppp started
[1;32m[2017-03-11 21:14:59]:  info: ppp0: [0;39mpppd_compat: ip-up started (pid 3086)
[1;32m[2017-03-11 21:14:59]:  info: ppp0: [0;39mpppd_compat: ip-up finished (1)
[1;32m[2017-03-11 21:15:01]:  info: ppp0: [0;39mrecv [LCP TermReq id=9]
[1;32m[2017-03-11 21:15:01]:  info: ppp0: [0;39msend [LCP TermAck id=9]
[1;34m[2017-03-11 21:15:01]: debug: ppp0: [0;39mppp_terminate
[1;32m[2017-03-11 21:15:01]:  info: ppp0: [0;39msend [RADIUS(1) Accounting-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "00:1a:4b:90:3e:3b"> <Called-Station-Id "ec:a8:6b:f7:e4:8a"> <Acct-Status-Type Stop> <Acct-Authentic RADIUS> <Acct-Session-Id "1534ee7faeb1c2be"> <Acct-Session-Time 5> <Acct-Input-Octets 702> <Acct-Output-Octets 538> <Acct-Input-Packets 11> <Acct-Output-Packets 9> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 172.20.0.81> <Acct-Terminate-Cause User-Request>]
[1;32m[2017-03-11 21:15:02]:  info: ppp0: [0;39mrecv [RADIUS(1) Accounting-Response id=1]
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mlcp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mauth_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mauth_layer_finished
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mccp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mccp_layer_finished
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipcp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipcp_layer_finished
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipv6cp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipv6cp_layer_finished
[1;32m[2017-03-11 21:15:02]:  info: [0;39mrecv [PPPoE PADT 00:1a:4b:90:3e:3b => ec:a8:6b:f7:e4:8a sid=0014]
[1;32m[2017-03-11 21:15:02]:  info: ppp0: [0;39mpppd_compat: ip-down started (pid 3094)
[1;32m[2017-03-11 21:15:02]:  info: ppp0: [0;39mpppd_compat: ip-down finished (0)
 
 
 Спасибо зарания
 
 
John_Doe Вампир

John_Doe

Posted
Posted (edited)

 

<Framed-IP-Address 172.20.0.81> <Acct-Terminate-Cause User-Request>

 

Написано же черным по английски - по запросу пользователя

Смотрите настройки на клиенте.

Edited by John_Doe
fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted

Я уже незнаю где копать, на компьютере pppoe работает хорошо, ставлю роутрер настраиваю pppoe, сессия не поднимается

:facepalm:  :facepalm:  :facepalm: 

Я уже незнаю где копать, на компьютере pppoe работает хорошо, ставлю роутрер настраиваю pppoe, сессия не поднимается

fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted

2017-03-11 22:21:05 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01555 NAS/NAS Server 2017-03-11 22:21:04 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01656 NAS/NAS Server 2017-03-11 22:20:34 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01609 NAS/NAS Server 2017-03-11 22:20:33 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01677 NAS/NAS Server 2017-03-11 22:20:03 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01472 NAS/NAS Server 2017-03-11 22:20:02 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01606 NAS/NAS Server

log abills

fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted

А точнее,где искать? На сервере встановлен acce-ppp server, помогите пожалуйста,буду очень благодарен.

~AsmodeuS~ Вампиреныш

~AsmodeuS~

Posted
Posted

А точнее,где искать? На сервере встановлен acce-ppp server, помогите пожалуйста,буду очень благодарен.

протокол авторизации какой :?

 

pap chap ms-chap ?

fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted
[modules]

#path=/usr/local/lib/accel-ppp

log_file

#log_tcp

#log_pgsql

pptp

pppoe

#l2tp

auth_mschap_v2

auth_mschap_v1

auth_chap_md5

auth_pap

radius

ippool

sigchld

pppd_compat

shaper_tbf

chap-secrets

 

[core]

log-error=/var/log/accel-ppp/core.log

thread-count=4

 

[ppp]

verbose=1

min-mtu=1000

mtu=1492

mru=1492

#ccp=0

#sid-case=upper

#check-ip=0

#single-session=replace

#mppe=require

 

[lcp]

echo-interval=30

echo-failure=3

 

[pptp]

echo-interval=30

verbose=1

 

[pppoe]

# Интерфейсы на которых запущен pppoe сервер ( должны быть соответственно подняты интерфейсы)

interface=eth1

interface=vlan2

interface=vlan3

interface=vlan4

#ac-name=xxx

#service-name=yyy

#pado-delay=0

#pado-delay=0,100:100,200:200,-1:500

#ifname-in-sid=called-sid

#tr101=1

verbose=1

 

#[l2tp]

#dictionary=/usr/local/share/accel-ppp/l2tp/dictionary

#hello-interval=60

#timeout=60

#rtimeout=5

#retransmit=5

#host-name=accel-ppp

#verbose=1

 

[dns]

dns1=10.0.0.10

#dns2=172.16.1.1

 

[radius]

dictionary=/usr/local/share/accel-ppp/radius/dictionary

nas-identifier=accel-ppp

nas-ip-address=127.0.0.1

gw-ip-address=10.0.0.10

auth-server=127.0.0.1:1812,secretpass

acct-server=127.0.0.1:1813,secretpass

dae-server=127.0.0.1:3799,secretpass

verbose=1

#timeout=3

#max-try=3

#acct-timeout=120

#acct-delay-time=0

 

[client-ip-range]

10.0.0.0/8 # Указать диапазоны раздаваемые клиентам в (по DHCP или вручную). 

           # ВАЖНО: они не должны пересекатся с пулами PPPOE или PPTP сервера доступа.

 

#[ip-pool]

#gw-ip-address=192.168.0.1

#192.168.0.2-255

#192.168.1.1-255

#192.168.2.1-255

#192.168.3.1-255

#192.168.4.0/24

 

[log]

log-file=/var/log/accel-ppp/accel-ppp.log

log-emerg=/var/log/accel-ppp/emerg.log

log-fail-file=/var/log/accel-ppp/auth-fail.log

#log-debug=/dev/stdout

#log-tcp=127.0.0.1:3000

copy=1

#color=1

#per-user-dir=per_user

#per-session-dir=per_session

#per-session=1

level=3

#log-tcp=127.0.0.1:3000

 

#[log-pgsql]

#conninfo=user=log

#log-table=log

 

[pppd-compat]

#ip-pre-up=/etc/ppp/ip-pre-up

#ip-up=/etc/ppp/ip-up

#ip-down=/etc/ppp/ip-down

#ip-change=/etc/ppp/ip-change

radattr-prefix=/var/run/radattr

verbose=1

 

#[chap-secrets]

#gw-ip-address=192.168.100.1

#chap-secrets=/etc/ppp/chap-secrets

 

[tbf]

#attr=Filter-Id

#down-burst-factor=0.1

#up-burst-factor=1.0

#latency=50

attr-down=PPPD-Downstream-Speed-Limit

attr-up=PPPD-Upstream-Speed-Limit

 

 

[cli]

telnet=127.0.0.1:2000

password=secretpass

tcp=127.0.0.1:2001

fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted
        func_send_coa = "send_coa"

  }

 Module: Checking authorize {...} for more modules to load

 Module: Linked to module rlm_preprocess

 Module: Instantiating module "preprocess" from file /usr/local/freeradius/etc/r                                             addb/modules/preprocess

  preprocess {

        huntgroups = "/usr/local/freeradius/etc/raddb/huntgroups"

        hints = "/usr/local/freeradius/etc/raddb/hints"

        with_ascend_hack = no

        ascend_channels_per_line = 23

        with_ntdomain_hack = no

        with_specialix_jetstream_hack = no

        with_cisco_vsa_hack = no

        with_alvarion_vsa_hack = no

  }

reading pairlist file /usr/local/freeradius/etc/raddb/huntgroups

reading pairlist file /usr/local/freeradius/etc/raddb/hints

 Module: Linked to module rlm_files

 Module: Instantiating module "files" from file /usr/local/freeradius/etc/raddb/                                             modules/files

  files {

        usersfile = "/usr/local/freeradius/etc/raddb/users"

        acctusersfile = "/usr/local/freeradius/etc/raddb/acct_users"

        preproxy_usersfile = "/usr/local/freeradius/etc/raddb/preproxy_users"

        compat = "no"

  }

reading pairlist file /usr/local/freeradius/etc/raddb/users

reading pairlist file /usr/local/freeradius/etc/raddb/acct_users

reading pairlist file /usr/local/freeradius/etc/raddb/preproxy_users

 Module: Checking preacct {...} for more modules to load

 Module: Checking accounting {...} for more modules to load

 Module: Checking post-auth {...} for more modules to load

 } # modules

} # server

radiusd: #### Opening IP addresses and Ports ####

listen {

        type = "auth"

        ipaddr = *

        port = 0

Failed binding to authentication address * port 1812: Address already in use

/usr/local/freeradius/etc/raddb/radiusd.conf[120]: Error binding to port for 0.0                                             .0.0 port 1812
fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted
[1;32m[2017-03-13 10:45:52]:  info: ppp0: [0;39msend [MSCHAP-v2 Challenge id=1 <1af748e6539415240e828bb11775b42>]

[1;33m[2017-03-13 10:45:57]:  warn: ppp0: [0;39mmschap-v2: timeout

[1;32m[2017-03-13 10:45:57]:  info: ppp0: [0;39msend [MSCHAP-v2 Challenge id=1 <1af748e6539415240e828bb11775b42>]

[1;32m[2017-03-13 10:45:57]:  info: ppp0: [0;39mrecv [MSCHAP-v2 Response id=1 <3e1d6755931f1a389b12d23d7b75edb3>, <ba722856151ae2d711deb47073ce6f9bbe8781fa95f4b3b4>, F=0, name=fix3r]

[1;32m[2017-03-13 10:45:57]:  info: ppp0: [0;39msend [RADIUS(1) Access-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "6c:3b:6b:26:22:08"> <Called-Station-Id "00:1a:92:75:6f:7a"><Microsoft MS-CHAP-Challenge ><Microsoft MS-CHAP2-Response >]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mrecv [RADIUS(1) Access-Reject id=1<Microsoft MS-MPPE-Encryption-Policy 1><Microsoft MS-CHAP2-Success ><Microsoft MS-MPPE-Send-Key ><Microsoft MS-MPPE-Encryption-Type 6><Microsoft MS-MPPE-Recv-Key > <Reply-Message "Wrong CID '6c:3b:6b:26:22:08'">]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39msend [MSCHAP-v2 Failure id=1 "E=691 R=0 V=3 M=Wrong CID '6c:3b:6b:26:22:08'"]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mfix3r: authentication failed

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mppp_terminate

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mlcp_layer_finish

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39msend [LCP TermReq id=3]

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mauth_layer_finish

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mauth_layer_finished

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mrecv [LCP TermReq id=1a]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39msend [LCP TermAck id=26]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mrecv [LCP TermAck id=3]

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mlcp_layer_finished

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mlcp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mauth_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mccp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mipcp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mipv6cp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mppp destablished

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mpppoe: ppp finished

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39mconnect: ppp0 <--> pppoe(6c:3b:6b:26:22:08)

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mlcp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mauth_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mccp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mipcp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mipv6cp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mppp established

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mlcp_layer_start

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39msend [LCP ConfReq id=1 <auth MSCHAP-v2> <mru 1492> <magic 5bd062c2>]

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39mrecv [LCP ConfReq id=1b <mru 1480> <magic 31c4cfbc>]

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39msend [LCP ConfAck id=1b ]

[1;32m[2017-03-13 10:46:09]:  info: ppp0: [0;39mrecv [LCP ConfReq id=1c <mru 1480> <magic 31c4cfbc>]

[1;32m[2017-03-13 10:46:09]:  info: ppp0: [0;39msend [LCP ConfAck id=1c ]

[1;32m[2017-03-13 10:46:10]:  info: ppp0: [0;39mrecv [LCP ConfReq id=1d <mru 1480> <magic 31c4cfbc>]

[1;32m[2017-03-13 10:46:10]:  info: ppp0: [0;39msend [LCP ConfAck id=1d ]

[1;34m[2017-03-13 10:46:11]: debug: ppp0: [0;39mfsm timeout

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39msend [LCP ConfReq id=1 <auth MSCHAP-v2> <mru 1492> <magic 5bd062c2>]

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39mrecv [LCP ConfAck id=1 <auth MSCHAP-v2> <mru 1492> <magic 5bd062c2>]

[1;34m[2017-03-13 10:46:11]: debug: ppp0: [0;39mlcp_layer_started

[1;34m[2017-03-13 10:46:11]: debug: ppp0: [0;39mauth_layer_start

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39msend [MSCHAP-v2 Challenge id=1 <8d2af3648b1ca83557fdf0c88ca1168>]

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39mrecv [MSCHAP-v2 Response id=1 <eb7b658ae1fbc8fe621e918138c91d4a>, <3bf9feab72e8467abb4cbcffd78338dec2d12ee4b5aaf2e>, F=0, name=fix3r]

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39msend [RADIUS(1) Access-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "6c:3b:6b:26:22:08"> <Called-Station-Id "00:1a:92:75:6f:7a"><Microsoft MS-CHAP-Challenge ><Microsoft MS-CHAP2-Response >]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mrecv [RADIUS(1) Access-Reject id=1<Microsoft MS-MPPE-Encryption-Policy 1><Microsoft MS-CHAP2-Success ><Microsoft MS-MPPE-Send-Key ><Microsoft MS-MPPE-Encryption-Type 6><Microsoft MS-MPPE-Recv-Key > <Reply-Message "Wrong CID '6c:3b:6b:26:22:08'">]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39msend [MSCHAP-v2 Failure id=1 "E=691 R=0 V=3 M=Wrong CID '6c:3b:6b:26:22:08'"]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mfix3r: authentication failed

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mppp_terminate

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mlcp_layer_finish

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39msend [LCP TermReq id=3]

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mauth_layer_finish

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mauth_layer_finished

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mrecv [LCP TermReq id=1e]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39msend [LCP TermAck id=30]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mrecv [LCP TermAck id=3]

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mlcp_layer_finished

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mlcp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mauth_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mccp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mipcp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mipv6cp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mppp destablished

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mpppoe: ppp finished

 

auth-fail.log

fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
 
 
emerg.log 
 
 
 
нехватает файлов
мда

нехватает файлов

~AsmodeuS~ Вампиреныш

~AsmodeuS~

Posted
Posted

Опишите подробнее пожалуйста

используетепри подключении тип авторизации chap

fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted
] [Host-Uniq 0x00005954]

12:06:14.466798 PPPoE PADR [service-Name] [Host-Uniq 0x00005954] [AC-Cookie 0x6D2AD480BCD86875236B6849A88BC8610307F1C77CD63E9B]

12:06:14.466995 PPPoE PADS [ses 0x2] [AC-Name "accel-ppp"] [service-Name] [Host-Uniq 0x00005954]

12:06:14.467840 PPPoE  [ses 0x2] LCP, Conf-Request (0x01), id 1, length 21

12:06:14.469982 PPPoE  [ses 0x2] LCP, Conf-Request (0x01), id 1, length 16

12:06:14.470184 PPPoE  [ses 0x2] LCP, Conf-Ack (0x02), id 1, length 16

12:06:14.470194 PPPoE  [ses 0x2] LCP, Conf-Ack (0x02), id 1, length 21

12:06:14.470538 PPPoE  [ses 0x2] CHAP, Challenge (0x01), id 1, Value 721d2f1d8bedc36ecd12b50c864378b2, Name

12:06:14.470592 PPPoE  [ses 0x2] LCP, Echo-Request (0x09), id 0, length 10

12:06:14.470688 PPPoE  [ses 0x2] LCP, Echo-Reply (0x0a), id 0, length 10

12:06:14.473877 PPPoE  [ses 0x2] CHAP, Response (0x02), id 1, Value f4a54897fce3454c691bd80a30448ee90000000000000000924a8f8f710d22eb224f35b1928983c3376ffdd00f423a5700, Name test

12:06:14.564745 PPPoE  [ses 0x2] CHAP, Success (0x03), id 1, Msg S=EF8B652AB582B55C00174078F8551BED46C1FFFD M=Authentication succeeded

12:06:14.564979 PPPoE  [ses 0x2] IPCP, Conf-Request (0x01), id 1, length 24

12:06:14.565214 PPPoE  [ses 0x2] IPCP, Conf-Request (0x01), id 1, length 12

12:06:14.565247 PPPoE  [ses 0x2] IPCP, Conf-Nack (0x03), id 1, length 12

12:06:14.565435 PPPoE  [ses 0x2] IPCP, Conf-Ack (0x02), id 1, length 12

12:06:14.565446 PPPoE  [ses 0x2] IPCP, Conf-Request (0x01), id 2, length 24

12:06:14.565600 PPPoE  [ses 0x2] IPCP, Conf-Ack (0x02), id 2, length 24

12:06:14.566334 PPPoE  [ses 0x2] IPCP, Term-Request (0x05), id 3, length 36

12:06:14.607585 PPPoE  [ses 0x2] IPCP, Term-Request (0x05), id 3, length 6

12:06:14.607817 PPPoE  [ses 0x2] IPCP, Term-Ack (0x06), id 3, length 6

12:06:14.607978 PPPoE  [ses 0x2] IPCP, Term-Ack (0x06), id 3, length 6

12:06:14.608227 PPPoE  [ses 0x2] LCP, Term-Request (0x05), id 2, length 34

12:06:14.690062 PPPoE  [ses 0x2] LCP, Term-Request (0x05), id 3, length 6

12:06:14.690261 PPPoE  [ses 0x2] LCP, Term-Ack (0x06), id 2, length 6

12:06:14.690303 PPPoE  [ses 0x2] LCP, Term-Ack (0x06), id 3, length 6

12:06:14.711978 PPPoE PADT [ses 0x2] [AC-Name "accel-ppp"] [service-Name] [Host-Uniq 0x00005954]
fix3r Пролетал Мимо

fix3r

Posted
  • Author
Posted

Спасибо мудрый человек, все работает

спасибо мудрый человек, все работает

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...