Jump to content
Local
Sign in to follow this  
fix3r

сессия

Recommended Posts

Народ помогите новичку, поставил abills, настроил pppoe-server, все работает на компьютере хорошо, когда подключаю маршрутизатор, не поднимает сессию, смотрю логи пиши что сессия поднялась на 10 сек

 

 

 

info: ppp0:  [0;39msend [RADIUS(1) Accounting-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "00:1a:4b:90:3e:3b"> <Called-Station-Id "ec:a8:6b:f7:e4:8a"> <Acct-Status-Type Start> <Acct-Authentic RADIUS> <Acct-Session-Id "1534ee7faeb1c2be"> <Acct-Session-Time 0> <Acct-Input-Octets 0> <Acct-Output-Octets 0> <Acct-Input-Packets 0> <Acct-Output-Packets 0> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 172.20.0.81>]

[1;32m[2017-03-11 21:14:59]:  info: ppp0: [0;39mrecv [RADIUS(1) Accounting-Response id=1]
[1;34m[2017-03-11 21:14:59]: debug: ppp0: [0;39mpppoe: ppp started
[1;32m[2017-03-11 21:14:59]:  info: ppp0: [0;39mpppd_compat: ip-up started (pid 3086)
[1;32m[2017-03-11 21:14:59]:  info: ppp0: [0;39mpppd_compat: ip-up finished (1)
[1;32m[2017-03-11 21:15:01]:  info: ppp0: [0;39mrecv [LCP TermReq id=9]
[1;32m[2017-03-11 21:15:01]:  info: ppp0: [0;39msend [LCP TermAck id=9]
[1;34m[2017-03-11 21:15:01]: debug: ppp0: [0;39mppp_terminate
[1;32m[2017-03-11 21:15:01]:  info: ppp0: [0;39msend [RADIUS(1) Accounting-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "00:1a:4b:90:3e:3b"> <Called-Station-Id "ec:a8:6b:f7:e4:8a"> <Acct-Status-Type Stop> <Acct-Authentic RADIUS> <Acct-Session-Id "1534ee7faeb1c2be"> <Acct-Session-Time 5> <Acct-Input-Octets 702> <Acct-Output-Octets 538> <Acct-Input-Packets 11> <Acct-Output-Packets 9> <Acct-Input-Gigawords 0> <Acct-Output-Gigawords 0> <Framed-IP-Address 172.20.0.81> <Acct-Terminate-Cause User-Request>]
[1;32m[2017-03-11 21:15:02]:  info: ppp0: [0;39mrecv [RADIUS(1) Accounting-Response id=1]
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mlcp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mauth_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mauth_layer_finished
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mccp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mccp_layer_finished
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipcp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipcp_layer_finished
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipv6cp_layer_finish
[1;34m[2017-03-11 21:15:02]: debug: ppp0: [0;39mipv6cp_layer_finished
[1;32m[2017-03-11 21:15:02]:  info: [0;39mrecv [PPPoE PADT 00:1a:4b:90:3e:3b => ec:a8:6b:f7:e4:8a sid=0014]
[1;32m[2017-03-11 21:15:02]:  info: ppp0: [0;39mpppd_compat: ip-down started (pid 3094)
[1;32m[2017-03-11 21:15:02]:  info: ppp0: [0;39mpppd_compat: ip-down finished (0)
 
 
 Спасибо зарания
 
 

Share this post


Link to post
Share on other sites

 

<Framed-IP-Address 172.20.0.81> <Acct-Terminate-Cause User-Request>

 

Написано же черным по английски - по запросу пользователя

Смотрите настройки на клиенте.

Edited by John_Doe

Share this post


Link to post
Share on other sites

Я уже незнаю где копать, на компьютере pppoe работает хорошо, ставлю роутрер настраиваю pppoe, сессия не поднимается

:facepalm:  :facepalm:  :facepalm: 

Я уже незнаю где копать, на компьютере pppoe работает хорошо, ставлю роутрер настраиваю pppoe, сессия не поднимается

Share this post


Link to post
Share on other sites

2017-03-11 22:21:05 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01555 NAS/NAS Server 2017-03-11 22:21:04 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01656 NAS/NAS Server 2017-03-11 22:20:34 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01609 NAS/NAS Server 2017-03-11 22:20:33 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01677 NAS/NAS Server 2017-03-11 22:20:03 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01472 NAS/NAS Server 2017-03-11 22:20:02 LOG_INFO AUTH fix3r CID: 10:fe:ed:ba:b2:1d GT: 0.01606 NAS/NAS Server

log abills

Share this post


Link to post
Share on other sites

Копать в сторону согласования параметров на сервере и клиенте

Share this post


Link to post
Share on other sites

А точнее,где искать? На сервере встановлен acce-ppp server, помогите пожалуйста,буду очень благодарен.

Share this post


Link to post
Share on other sites

А точнее,где искать? На сервере встановлен acce-ppp server, помогите пожалуйста,буду очень благодарен.

протокол авторизации какой :?

 

pap chap ms-chap ?

Share this post


Link to post
Share on other sites
[modules]

#path=/usr/local/lib/accel-ppp

log_file

#log_tcp

#log_pgsql

pptp

pppoe

#l2tp

auth_mschap_v2

auth_mschap_v1

auth_chap_md5

auth_pap

radius

ippool

sigchld

pppd_compat

shaper_tbf

chap-secrets

 

[core]

log-error=/var/log/accel-ppp/core.log

thread-count=4

 

[ppp]

verbose=1

min-mtu=1000

mtu=1492

mru=1492

#ccp=0

#sid-case=upper

#check-ip=0

#single-session=replace

#mppe=require

 

[lcp]

echo-interval=30

echo-failure=3

 

[pptp]

echo-interval=30

verbose=1

 

[pppoe]

# Интерфейсы на которых запущен pppoe сервер ( должны быть соответственно подняты интерфейсы)

interface=eth1

interface=vlan2

interface=vlan3

interface=vlan4

#ac-name=xxx

#service-name=yyy

#pado-delay=0

#pado-delay=0,100:100,200:200,-1:500

#ifname-in-sid=called-sid

#tr101=1

verbose=1

 

#[l2tp]

#dictionary=/usr/local/share/accel-ppp/l2tp/dictionary

#hello-interval=60

#timeout=60

#rtimeout=5

#retransmit=5

#host-name=accel-ppp

#verbose=1

 

[dns]

dns1=10.0.0.10

#dns2=172.16.1.1

 

[radius]

dictionary=/usr/local/share/accel-ppp/radius/dictionary

nas-identifier=accel-ppp

nas-ip-address=127.0.0.1

gw-ip-address=10.0.0.10

auth-server=127.0.0.1:1812,secretpass

acct-server=127.0.0.1:1813,secretpass

dae-server=127.0.0.1:3799,secretpass

verbose=1

#timeout=3

#max-try=3

#acct-timeout=120

#acct-delay-time=0

 

[client-ip-range]

10.0.0.0/8 # Указать диапазоны раздаваемые клиентам в (по DHCP или вручную). 

           # ВАЖНО: они не должны пересекатся с пулами PPPOE или PPTP сервера доступа.

 

#[ip-pool]

#gw-ip-address=192.168.0.1

#192.168.0.2-255

#192.168.1.1-255

#192.168.2.1-255

#192.168.3.1-255

#192.168.4.0/24

 

[log]

log-file=/var/log/accel-ppp/accel-ppp.log

log-emerg=/var/log/accel-ppp/emerg.log

log-fail-file=/var/log/accel-ppp/auth-fail.log

#log-debug=/dev/stdout

#log-tcp=127.0.0.1:3000

copy=1

#color=1

#per-user-dir=per_user

#per-session-dir=per_session

#per-session=1

level=3

#log-tcp=127.0.0.1:3000

 

#[log-pgsql]

#conninfo=user=log

#log-table=log

 

[pppd-compat]

#ip-pre-up=/etc/ppp/ip-pre-up

#ip-up=/etc/ppp/ip-up

#ip-down=/etc/ppp/ip-down

#ip-change=/etc/ppp/ip-change

radattr-prefix=/var/run/radattr

verbose=1

 

#[chap-secrets]

#gw-ip-address=192.168.100.1

#chap-secrets=/etc/ppp/chap-secrets

 

[tbf]

#attr=Filter-Id

#down-burst-factor=0.1

#up-burst-factor=1.0

#latency=50

attr-down=PPPD-Downstream-Speed-Limit

attr-up=PPPD-Upstream-Speed-Limit

 

 

[cli]

telnet=127.0.0.1:2000

password=secretpass

tcp=127.0.0.1:2001

Share this post


Link to post
Share on other sites
        func_send_coa = "send_coa"

  }

 Module: Checking authorize {...} for more modules to load

 Module: Linked to module rlm_preprocess

 Module: Instantiating module "preprocess" from file /usr/local/freeradius/etc/r                                             addb/modules/preprocess

  preprocess {

        huntgroups = "/usr/local/freeradius/etc/raddb/huntgroups"

        hints = "/usr/local/freeradius/etc/raddb/hints"

        with_ascend_hack = no

        ascend_channels_per_line = 23

        with_ntdomain_hack = no

        with_specialix_jetstream_hack = no

        with_cisco_vsa_hack = no

        with_alvarion_vsa_hack = no

  }

reading pairlist file /usr/local/freeradius/etc/raddb/huntgroups

reading pairlist file /usr/local/freeradius/etc/raddb/hints

 Module: Linked to module rlm_files

 Module: Instantiating module "files" from file /usr/local/freeradius/etc/raddb/                                             modules/files

  files {

        usersfile = "/usr/local/freeradius/etc/raddb/users"

        acctusersfile = "/usr/local/freeradius/etc/raddb/acct_users"

        preproxy_usersfile = "/usr/local/freeradius/etc/raddb/preproxy_users"

        compat = "no"

  }

reading pairlist file /usr/local/freeradius/etc/raddb/users

reading pairlist file /usr/local/freeradius/etc/raddb/acct_users

reading pairlist file /usr/local/freeradius/etc/raddb/preproxy_users

 Module: Checking preacct {...} for more modules to load

 Module: Checking accounting {...} for more modules to load

 Module: Checking post-auth {...} for more modules to load

 } # modules

} # server

radiusd: #### Opening IP addresses and Ports ####

listen {

        type = "auth"

        ipaddr = *

        port = 0

Failed binding to authentication address * port 1812: Address already in use

/usr/local/freeradius/etc/raddb/radiusd.conf[120]: Error binding to port for 0.0                                             .0.0 port 1812

Share this post


Link to post
Share on other sites
[1;32m[2017-03-13 10:45:52]:  info: ppp0: [0;39msend [MSCHAP-v2 Challenge id=1 <1af748e6539415240e828bb11775b42>]

[1;33m[2017-03-13 10:45:57]:  warn: ppp0: [0;39mmschap-v2: timeout

[1;32m[2017-03-13 10:45:57]:  info: ppp0: [0;39msend [MSCHAP-v2 Challenge id=1 <1af748e6539415240e828bb11775b42>]

[1;32m[2017-03-13 10:45:57]:  info: ppp0: [0;39mrecv [MSCHAP-v2 Response id=1 <3e1d6755931f1a389b12d23d7b75edb3>, <ba722856151ae2d711deb47073ce6f9bbe8781fa95f4b3b4>, F=0, name=fix3r]

[1;32m[2017-03-13 10:45:57]:  info: ppp0: [0;39msend [RADIUS(1) Access-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "6c:3b:6b:26:22:08"> <Called-Station-Id "00:1a:92:75:6f:7a"><Microsoft MS-CHAP-Challenge ><Microsoft MS-CHAP2-Response >]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mrecv [RADIUS(1) Access-Reject id=1<Microsoft MS-MPPE-Encryption-Policy 1><Microsoft MS-CHAP2-Success ><Microsoft MS-MPPE-Send-Key ><Microsoft MS-MPPE-Encryption-Type 6><Microsoft MS-MPPE-Recv-Key > <Reply-Message "Wrong CID '6c:3b:6b:26:22:08'">]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39msend [MSCHAP-v2 Failure id=1 "E=691 R=0 V=3 M=Wrong CID '6c:3b:6b:26:22:08'"]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mfix3r: authentication failed

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mppp_terminate

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mlcp_layer_finish

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39msend [LCP TermReq id=3]

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mauth_layer_finish

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mauth_layer_finished

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mrecv [LCP TermReq id=1a]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39msend [LCP TermAck id=26]

[1;32m[2017-03-13 10:45:58]:  info: ppp0: [0;39mrecv [LCP TermAck id=3]

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mlcp_layer_finished

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mlcp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mauth_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mccp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mipcp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mipv6cp_layer_free

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mppp destablished

[1;34m[2017-03-13 10:45:58]: debug: ppp0: [0;39mpppoe: ppp finished

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39mconnect: ppp0 <--> pppoe(6c:3b:6b:26:22:08)

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mlcp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mauth_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mccp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mipcp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mipv6cp_layer_init

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mppp established

[1;34m[2017-03-13 10:46:08]: debug: ppp0: [0;39mlcp_layer_start

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39msend [LCP ConfReq id=1 <auth MSCHAP-v2> <mru 1492> <magic 5bd062c2>]

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39mrecv [LCP ConfReq id=1b <mru 1480> <magic 31c4cfbc>]

[1;32m[2017-03-13 10:46:08]:  info: ppp0: [0;39msend [LCP ConfAck id=1b ]

[1;32m[2017-03-13 10:46:09]:  info: ppp0: [0;39mrecv [LCP ConfReq id=1c <mru 1480> <magic 31c4cfbc>]

[1;32m[2017-03-13 10:46:09]:  info: ppp0: [0;39msend [LCP ConfAck id=1c ]

[1;32m[2017-03-13 10:46:10]:  info: ppp0: [0;39mrecv [LCP ConfReq id=1d <mru 1480> <magic 31c4cfbc>]

[1;32m[2017-03-13 10:46:10]:  info: ppp0: [0;39msend [LCP ConfAck id=1d ]

[1;34m[2017-03-13 10:46:11]: debug: ppp0: [0;39mfsm timeout

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39msend [LCP ConfReq id=1 <auth MSCHAP-v2> <mru 1492> <magic 5bd062c2>]

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39mrecv [LCP ConfAck id=1 <auth MSCHAP-v2> <mru 1492> <magic 5bd062c2>]

[1;34m[2017-03-13 10:46:11]: debug: ppp0: [0;39mlcp_layer_started

[1;34m[2017-03-13 10:46:11]: debug: ppp0: [0;39mauth_layer_start

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39msend [MSCHAP-v2 Challenge id=1 <8d2af3648b1ca83557fdf0c88ca1168>]

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39mrecv [MSCHAP-v2 Response id=1 <eb7b658ae1fbc8fe621e918138c91d4a>, <3bf9feab72e8467abb4cbcffd78338dec2d12ee4b5aaf2e>, F=0, name=fix3r]

[1;32m[2017-03-13 10:46:11]:  info: ppp0: [0;39msend [RADIUS(1) Access-Request id=1 <User-Name "fix3r"> <NAS-IP-Address 127.0.0.1> <NAS-Port 0> <NAS-Port-Type Virtual> <Tunnel-Type L2TP> <Service-Type Framed-User> <Framed-Protocol PPP> <Calling-Station-Id "6c:3b:6b:26:22:08"> <Called-Station-Id "00:1a:92:75:6f:7a"><Microsoft MS-CHAP-Challenge ><Microsoft MS-CHAP2-Response >]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mrecv [RADIUS(1) Access-Reject id=1<Microsoft MS-MPPE-Encryption-Policy 1><Microsoft MS-CHAP2-Success ><Microsoft MS-MPPE-Send-Key ><Microsoft MS-MPPE-Encryption-Type 6><Microsoft MS-MPPE-Recv-Key > <Reply-Message "Wrong CID '6c:3b:6b:26:22:08'">]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39msend [MSCHAP-v2 Failure id=1 "E=691 R=0 V=3 M=Wrong CID '6c:3b:6b:26:22:08'"]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mfix3r: authentication failed

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mppp_terminate

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mlcp_layer_finish

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39msend [LCP TermReq id=3]

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mauth_layer_finish

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mauth_layer_finished

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mrecv [LCP TermReq id=1e]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39msend [LCP TermAck id=30]

[1;32m[2017-03-13 10:46:12]:  info: ppp0: [0;39mrecv [LCP TermAck id=3]

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mlcp_layer_finished

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mlcp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mauth_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mccp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mipcp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mipv6cp_layer_free

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mppp destablished

[1;34m[2017-03-13 10:46:12]: debug: ppp0: [0;39mpppoe: ppp finished

 

auth-fail.log

Share this post


Link to post
Share on other sites
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
pppd_compat: exec '/etc/ppp/ip-down': No such file or directory
pppd_compat: exec '/etc/ppp/ip-up': No such file or directory
 
 
emerg.log 
 
 
 
нехватает файлов
мда

нехватает файлов

Share this post


Link to post
Share on other sites

попробуйте chap авторизацию и все должно заработать

Share this post


Link to post
Share on other sites

Опишите подробнее пожалуйста

используетепри подключении тип авторизации chap

Share this post


Link to post
Share on other sites
] [Host-Uniq 0x00005954]

12:06:14.466798 PPPoE PADR [service-Name] [Host-Uniq 0x00005954] [AC-Cookie 0x6D2AD480BCD86875236B6849A88BC8610307F1C77CD63E9B]

12:06:14.466995 PPPoE PADS [ses 0x2] [AC-Name "accel-ppp"] [service-Name] [Host-Uniq 0x00005954]

12:06:14.467840 PPPoE  [ses 0x2] LCP, Conf-Request (0x01), id 1, length 21

12:06:14.469982 PPPoE  [ses 0x2] LCP, Conf-Request (0x01), id 1, length 16

12:06:14.470184 PPPoE  [ses 0x2] LCP, Conf-Ack (0x02), id 1, length 16

12:06:14.470194 PPPoE  [ses 0x2] LCP, Conf-Ack (0x02), id 1, length 21

12:06:14.470538 PPPoE  [ses 0x2] CHAP, Challenge (0x01), id 1, Value 721d2f1d8bedc36ecd12b50c864378b2, Name

12:06:14.470592 PPPoE  [ses 0x2] LCP, Echo-Request (0x09), id 0, length 10

12:06:14.470688 PPPoE  [ses 0x2] LCP, Echo-Reply (0x0a), id 0, length 10

12:06:14.473877 PPPoE  [ses 0x2] CHAP, Response (0x02), id 1, Value f4a54897fce3454c691bd80a30448ee90000000000000000924a8f8f710d22eb224f35b1928983c3376ffdd00f423a5700, Name test

12:06:14.564745 PPPoE  [ses 0x2] CHAP, Success (0x03), id 1, Msg S=EF8B652AB582B55C00174078F8551BED46C1FFFD M=Authentication succeeded

12:06:14.564979 PPPoE  [ses 0x2] IPCP, Conf-Request (0x01), id 1, length 24

12:06:14.565214 PPPoE  [ses 0x2] IPCP, Conf-Request (0x01), id 1, length 12

12:06:14.565247 PPPoE  [ses 0x2] IPCP, Conf-Nack (0x03), id 1, length 12

12:06:14.565435 PPPoE  [ses 0x2] IPCP, Conf-Ack (0x02), id 1, length 12

12:06:14.565446 PPPoE  [ses 0x2] IPCP, Conf-Request (0x01), id 2, length 24

12:06:14.565600 PPPoE  [ses 0x2] IPCP, Conf-Ack (0x02), id 2, length 24

12:06:14.566334 PPPoE  [ses 0x2] IPCP, Term-Request (0x05), id 3, length 36

12:06:14.607585 PPPoE  [ses 0x2] IPCP, Term-Request (0x05), id 3, length 6

12:06:14.607817 PPPoE  [ses 0x2] IPCP, Term-Ack (0x06), id 3, length 6

12:06:14.607978 PPPoE  [ses 0x2] IPCP, Term-Ack (0x06), id 3, length 6

12:06:14.608227 PPPoE  [ses 0x2] LCP, Term-Request (0x05), id 2, length 34

12:06:14.690062 PPPoE  [ses 0x2] LCP, Term-Request (0x05), id 3, length 6

12:06:14.690261 PPPoE  [ses 0x2] LCP, Term-Ack (0x06), id 2, length 6

12:06:14.690303 PPPoE  [ses 0x2] LCP, Term-Ack (0x06), id 3, length 6

12:06:14.711978 PPPoE PADT [ses 0x2] [AC-Name "accel-ppp"] [service-Name] [Host-Uniq 0x00005954]

Share this post


Link to post
Share on other sites

поробуйте отключить pppd_compat

 

и проверте коректен ли этот адрес gw-ip-address=10.0.0.10

Share this post


Link to post
Share on other sites

Спасибо мудрый человек, все работает

спасибо мудрый человек, все работает

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Картавый
      Всем привет , ребята начал пилить сайт для работы, нужно написать условие :
      Если у пользователя в таблице user поле succes == 1 показать содержимое страницы иначе перекинуть его на index.php

      Помогите соответственно написать такой скрипт используя сессию
×