Centos 8 OpenVPN
OpenVPN сервер на базе CentOS. В этом конкретном случае CentOS 8. На Stream 8 и Stream 9 еще не перекочевал. Пример конфигов для быстрого поднятия с нуля.
Для начала установка
# yum install epel-release
# yum install openvpn easy-rsa
cp /usr/share/doc/openvpn/sample/sample-config-files/server.conf /etc/openvpn/server.conf
cp /usr/share/easy-rsa/3 /etc/openvpn/easy-rsa
cp /usr/share/doc/easy-rsa/vars.example /etc/openvpn/easy-rsa/vars
Переменные для easy-rsa/vars
set_var EASYRSA_KEY_SIZE        4096
set_var EASYRSA_CRL_DAYS        3650
set_var EASYRSA_DIGEST          "sha512"
Генерирование сертификатов для сервера
# cd /etc/openvpn/easy-rsa
# ./easyrsa init-pki
# ./easyrsa build-ca nopass
# ./easyrsa gen-req server.local nopass
# ./easyrsa sign-req server server.local nopass
yes
# mkdir /etc/openvpn/ssl -p
server.local - название для сервера

Клиентские сертификаты и ключи (генерирование):
# cd /etc/openvpn/easy-rsa
# ./easyrsa gen-req client1 nopass
# ./easyrsa sign-req client client1 nopass
client1 - это название для клиента

Создаем пустой список отозванных сертификатов
# ./easyrsa gen-crl
Подпись пакетов с помощью HMAC.  Нужно для защиты самого сервера от DoS атак.
# cd /etc/openvpn/ssl
# openvpn --genkey --secret ta.key
Копируем полученные сертификаты
# cp /etc/openvpn/easy-rsa/pki/ca.crt /etc/openvpn/ssl/
# cp /etc/openvpn/easy-rsa/pki/issued/server.local.crt /etc/openvpn/ssl/
# cp /etc/openvpn/easy-rsa/pki/private/server.local.key /etc/openvpn/ssl/
# cp /etc/openvpn/easy-rsa/pki/crl.pem /etc/openvpn/ssl/
Генерируем DHparam
# cd /etc/openvpn/ssl
# openssl dhparam -out dh.pem 4096

Как отозвать сертификат
# ./easyrsa revoke client1
# ./easyrsa gen-crl
# cp /root/easy-rsa-3/pki/crl.pem /etc/openvpn/ssl/

Пример конфига сервера
 
###########
# Sample OpenVPN 2.0 config file for            #
# multi-client server.                          #
#                                               #
# This file is for the server side              #
# of a many-clients <-> one-server              #
# OpenVPN configuration.                        #
#                                               #
# OpenVPN also supports                         #
# single-machine <-> single-machine             #
# configurations (See the Examples page         #
# on the web site for more info).               #
#                                               #
# This config should work on Windows            #
# or Linux/BSD systems.  Remember on            #
# Windows to quote pathnames and use            #
# double backslashes, e.g.:                     #
# "C:\\Program Files\\OpenVPN\\config\\foo.key" #
#                                               #
# Comments are preceded with '#' or ';'         #
###########

# Which local IP address should OpenVPN
# listen on? (optional)
;local a.b.c.d

# Which TCP/UDP port should OpenVPN listen on?
# If you want to run multiple OpenVPN instances
# on the same machine, use a different port
# number for each one.  You will need to
# open up this port on your firewall.
port 1194

# TCP or UDP server?
;proto tcp
proto udp

# "dev tun" will create a routed IP tunnel,
# "dev tap" will create an ethernet tunnel.
# Use "dev tap0" if you are ethernet bridging
# and have precreated a tap0 virtual interface
# and bridged it with your ethernet interface.
# If you want to control access policies
# over the VPN, you must create firewall
# rules for the the TUN/TAP interface.
# On non-Windows systems, you can give
# an explicit unit number, such as tun0.
# On Windows, use "dev-node" for this.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
;dev tap
dev tun

# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel if you
# have more than one.  On XP SP2 or higher,
# you may need to selectively disable the
# Windows firewall for the TAP adapter.
# Non-Windows systems usually don't need this.
;dev-node MyTap

# SSL/TLS root certificate (ca), certificate
# (cert), and private key (key).  Each client
# and the server must have their own cert and
# key file.  The server and all clients will
# use the same ca file.
#
# See the "easy-rsa" directory for a series
# of scripts for generating RSA certificates
# and private keys.  Remember to use
# a unique Common Name for the server
# and each of the client certificates.
#
# Any X509 key management system can be used.
# OpenVPN can also use a PKCS #12 formatted key file
# (see "pkcs12" directive in man page).
ca /etc/openvpn/ssl/ca.crt
cert /etc/openvpn/ssl/server.local.crt
key /etc/openvpn/ssl/server.local.key  # This file should be kept secret

# Diffie hellman parameters.
# Generate your own with:
#   openssl dhparam -out dh2048.pem 2048
dh /etc/openvpn/ssl/dh.pem

# Network topology
# Should be subnet (addressing via IP)
# unless Windows clients v2.0.9 and lower have to
# be supported (then net30, i.e. a /30 per client)
# Defaults to net30 (not recommended)
;topology subnet

# Configure server mode and supply a VPN subnet
# for OpenVPN to draw client addresses from.
# The server will take 10.8.0.1 for itself,
# the rest will be made available to clients.
# Each client will be able to reach the server
# on 10.8.0.1. Comment this line out if you are
# ethernet bridging. See the man page for more info.
server 172.16.98.0 255.255.255.0

# Maintain a record of client <-> virtual IP address
# associations in this file.  If OpenVPN goes down or
# is restarted, reconnecting clients can be assigned
# the same virtual IP address from the pool that was
# previously assigned.
ifconfig-pool-persist ipp.txt

# Configure server mode for ethernet bridging.
# You must first use your OS's bridging capability
# to bridge the TAP interface with the ethernet
# NIC interface.  Then you must manually set the
# IP/netmask on the bridge interface, here we
# assume 10.8.0.4/255.255.255.0.  Finally we
# must set aside an IP range in this subnet
# (start=10.8.0.50 end=10.8.0.100) to allocate
# to connecting clients.  Leave this line commented
# out unless you are ethernet bridging.
;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100

# Configure server mode for ethernet bridging
# using a DHCP-proxy, where clients talk
# to the OpenVPN server-side DHCP server
# to receive their IP address allocation
# and DNS server addresses.  You must first use
# your OS's bridging capability to bridge the TAP
# interface with the ethernet NIC interface.
# Note: this mode only works on clients (such as
# Windows), where the client-side TAP adapter is
# bound to a DHCP client.
;server-bridge

# Push routes to the client to allow it
# to reach other private subnets behind
# the server.  Remember that these
# private subnets will also need
# to know to route the OpenVPN client
# address pool (10.8.0.0/255.255.255.0)
# back to the OpenVPN server.
;push "route 192.168.10.0 255.255.255.0"
;push "route 192.168.20.0 255.255.255.0"

# To assign specific IP addresses to specific
# clients or if a connecting client has a private
# subnet behind it that should also have VPN access,
# use the subdirectory "ccd" for client-specific
# configuration files (see man page for more info).

# EXAMPLE: Suppose the client
# having the certificate common name "Thelonious"
# also has a small subnet behind his connecting
# machine, such as 192.168.40.128/255.255.255.248.
# First, uncomment out these lines:
client-config-dir /etc/openvpn/ccd
;route 192.168.40.128 255.255.255.248
# Then create a file ccd/Thelonious with this line:
#   iroute 192.168.40.128 255.255.255.248
# This will allow Thelonious' private subnet to
# access the VPN.  This example will only work
# if you are routing, not bridging, i.e. you are
# using "dev tun" and "server" directives.

# EXAMPLE: Suppose you want to give
# Thelonious a fixed VPN IP address of 10.9.0.1.
# First uncomment out these lines:
;client-config-dir ccd
;route 10.9.0.0 255.255.255.252
# Then add this line to ccd/Thelonious:
#   ifconfig-push 10.9.0.1 10.9.0.2

# Suppose that you want to enable different
# firewall access policies for different groups
# of clients.  There are two methods:
# (1) Run multiple OpenVPN daemons, one for each
#     group, and firewall the TUN/TAP interface
#     for each group/daemon appropriately.
# (2) (Advanced) Create a script to dynamically
#     modify the firewall in response to access
#     from different clients.  See man
#     page for more info on learn-address script.
;learn-address ./script

# If enabled, this directive will configure
# all clients to redirect their default
# network gateway through the VPN, causing
# all IP traffic such as web browsing and
# and DNS lookups to go through the VPN
# (The OpenVPN server machine may need to NAT
# or bridge the TUN/TAP interface to the internet
# in order for this to work properly).
;push "redirect-gateway def1 bypass-dhcp"

# Certain Windows-specific network settings
# can be pushed to clients, such as DNS
# or WINS server addresses.  CAVEAT:
# http://openvpn.net/faq.html#dhcpcaveats
# The addresses below refer to the public
# DNS servers provided by opendns.com.
;push "dhcp-option DNS 208.67.222.222"
;push "dhcp-option DNS 208.67.220.220"

# Uncomment this directive to allow different
# clients to be able to "see" each other.
# By default, clients will only see the server.
# To force clients to only see the server, you
# will also need to appropriately firewall the
# server's TUN/TAP interface.
;client-to-client

# Uncomment this directive if multiple clients
# might connect with the same certificate/key
# files or common names.  This is recommended
# only for testing purposes.  For production use,
# each client should have its own certificate/key
# pair.
#
# IF YOU HAVE NOT GENERATED INDIVIDUAL
# CERTIFICATE/KEY PAIRS FOR EACH CLIENT,
# EACH HAVING ITS OWN UNIQUE "COMMON NAME",
# UNCOMMENT THIS LINE OUT.
;duplicate-cn

# The keepalive directive causes ping-like
# messages to be sent back and forth over
# the link so that each side knows when
# the other side has gone down.
# Ping every 10 seconds, assume that remote
# peer is down if no ping received during
# a 120 second time period.
keepalive 10 120

# For extra security beyond that provided
# by SSL/TLS, create an "HMAC firewall"
# to help block DoS attacks and UDP port flooding.
#
# Generate with:
#   openvpn --genkey --secret ta.key
#
# The server and each client must have
# a copy of this key.
# The second parameter should be '0'
# on the server and '1' on the clients.
tls-auth /etc/openvpn/ssl/ta.key 0 # This file is secret

tls-version-min 1.2
tls-cipher TLS-DHE-RSA-WITH-AES-256-GCM-SHA384

auth SHA512

# Select a cryptographic cipher.
# This config item must be copied to
# the client config file as well.
# Note that v2.4 client/server will automatically
# negotiate AES-256-GCM in TLS mode.
# See also the ncp-cipher option in the manpage
cipher AES-256-CBC

# Enable compression on the VPN link and push the
# option to the client (v2.4+ only, for earlier
# versions see below)
;compress lz4-v2
;push "compress lz4-v2"

# For compression compatible with older clients use comp-lzo
# If you enable it here, you must also
# enable it in the client config file.
comp-lzo

# The maximum number of concurrently connected
# clients we want to allow.
;max-clients 100

# It's a good idea to reduce the OpenVPN
# daemon's privileges after initialization.
#
# You can uncomment this out on
# non-Windows systems.
user nobody
group nobody

# The persist options will try to avoid
# accessing certain resources on restart
# that may no longer be accessible because
# of the privilege downgrade.
persist-key
persist-tun

# Output a short status file showing
# current connections, truncated
# and rewritten every minute.
status openvpn-status.log

# By default, log messages will go to the syslog (or
# on Windows, if running as a service, they will go to
# the "\Program Files\OpenVPN\log" directory).
# Use log or log-append to override this default.
# "log" will truncate the log file on OpenVPN startup,
# while "log-append" will append to it.  Use one
# or the other (but not both).
log         /var/log/openvpn/openvpn.log
log-append  /var/log/openvpn/openvpn.log

# Set the appropriate level of log
# file verbosity.
#
# 0 is silent, except for fatal errors
# 4 is reasonable for general usage
# 5 and 6 can help to debug connection problems
# 9 is extremely verbose
verb 3

# Silence repeating messages.  At most 20
# sequential messages of the same message
# category will be output to the log.
;mute 20

# Notify the client that when the server restarts so it
# can automatically reconnect.
explicit-exit-notify 1
Он ложится в /etc/openvpn/server/example_name.conf
и запускается с добавлением в автозапуск при старте
# systemctl start openvpn-server@example_name
# systemctl enable openvpn-server@example_name

Пример клиента для сгенерированного сертификата client1
В конфиге указываются ключи чтобы можно было использовать один файл и не подставлять пути для сертификатов.
 
client

dev tun

proto udp

remote OPENVPN_SERVER_HOST 1194

;remote-random

resolv-retry infinite

nobind

user nobody
group nogroup

persist-key
persist-tun

log         /var/log/openvpn/openvpn.log
log-append  /var/log/openvpn/openvpn.log

remote-cert-tls server

tls-version-min 1.2
tls-cipher TLS-DHE-RSA-WITH-AES-256-GCM-SHA384

cipher AES-256-CBC

auth SHA512

comp-lzo

verb 3

;mute 20

;redirect-gateway def1



<ca>
-----BEGIN CERTIFICATE-----

-----END CERTIFICATE-----
</ca>

<cert>
-----BEGIN CERTIFICATE-----

-----END CERTIFICATE-----
</cert>

<key>
-----BEGIN PRIVATE KEY-----

-----END PRIVATE KEY-----
</key>

key-direction 1

<tls-auth>
-----BEGIN OpenVPN Static key V1-----

-----END OpenVPN Static key V1-----
</tls-auth>

 
<ca> - данные из /etc/openvpn/ssl/ca.crt
<cert> - данные из /etc/openvpn/easy-rsa/pki/issued/client1.crt
<key> - данные из /etc/openvpn/easy-rsa/pki/private/client1.key
<tls-auth> - данные из /etc/openvpn/ssl/ta.key
Можно подключаться клиентом. Если это линукс, то ложим в /etc/openvpn/client/client1.conf и запускаем
# systemctl start openvpn-client@client1
# systemctl enable openvpn-client@client1
Эти конфиги на сейчас вполне рабочие, т.к. только что поднимались на паре серверов.

Но могут быть разные ошибки с шифрованием.
К примеру:
TLS Error: incoming packet authentication failed from [AF_INET]IP:41945
Authenticate/Decrypt packet error: packet HMAC authentication failed
Или
TLS Error: cannot locate HMAC in incoming packet from [AF_INET]IP:42081
В этом случае проблемы с tls-auth и тем файлом, что был сгенерирован в /etc/openvpn/ssl/ta.key
На сервере должна быть строка в конфиге
tls-auth /etc/openvpn/ssl/ta.key 0
на клиенте тоже самое, но с 1 на конце вместо 0

Если на клиенте указывается не путь, а прямо в тексте конфига , то обязательно должно быть
key-direction 1

При проблемах лучше сразу включить в конфиге verb 6, к примеру, и смотреть лог.
Там будет видно ошибку или несоответствие протоколов шифрования (на сервере может оказаться один набор, а на клиенте другой и они не смогут связаться)

При включенном selinux не будет стартовать по причине отсутствия доступа к /etc/openvpn/client/client1.conf
/sbin/restorecon -v /etc/openvpn/client/client1.conf

Альтернативный порт для OpenVPN с SELinux
# yum install policycoreutils-python
# semanage port -l | grep openvpn_port_t
openvpn_port_t                 tcp      1194
openvpn_port_t                 udp      1194
# semanage port -a -t openvpn_port_t -p udp  1195
# semanage port -l | grep openvpn_port_t
openvpn_port_t                 tcp      1194
openvpn_port_t                 udp      1195, 1194

И, конечно же, фаервол:
# firewall-cmd --zone public --add-service openvpn
# firewall-cmd --permanent --zone public --add-service openvpn
Если порт другой, то
# firewall-cmd --zone public --add-port=1195/udp
# firewall-cmd --permanent --zone public --add-port=1195/udp
skybetik
2022-01-23 21:31:03
Ви маєте увійти під своїм обліковим записом

loading