Еще узнал что провайдер мой работает в режиме 108G Turbo - а planet 4033 такой режим тоже не поддерживает (
от падлюки
Прийдеться всетаки покупать D-link 2100 у них.
это все параметри базовой АП под Blue Box выданные командой get config:
wlan1 revisions: mac 5.8 phy 4.4 analog 4.6
PCI Vendor ID: 0x168c, Device ID: 0x13
Sub Vendor ID: 0x168c, Sub Device ID: 0x13
chip is AR2312
Country Code: SU
Operation Mode: Access Point
Wlan State: Enabled
Radio Frequency: 2392 MHz (IEEE -3)
Wireless LAN Mode: 802.11g Turbo
Auto Channel Select: Disabled
Pureg Mode: Disabled
Data Rate: 12
Antenna: 1
Name server IP address:
Name server domain suffix:
SSID: NS2
SSID Suppress Mode: Disabled
System Name: WLAN Access Point
Beacon Interval: 100
DTIM: 1
Fragmentation Threshold: 2346
RTS/CTS Threshold: 2346
Burst Time: 2
Burst Sequence Threshold: 3
IP Mask: 255.255.255.0
Host IP Address: 0.0.0.0
Gateway IP Address: 0.0.0.0
SNTP/NTP Server IP Address:
Time Zone:
HW Transmit Retry Limit: 4
SW Transmit Retry Limit: 3
TransmitPower: full
Current Transmit Output Power 17.0 dBm
SuperG :Disabled
Encryption: Disabled
Cipher selection: WEP
Authentication Type: Open System
Default transmit key: 1
Shared Key 1, size 40, 0000000000
Access Check: Disabled
Key Entry Method: hexadecimal
Group Key Update Interval: 1800 seconds
Key Source: flash
Aging Interval: 380 seconds
Telnet Access: Enabled
Telnet Timeout: 0 seconds
Minimum rate: 1 Mbps
XR Poll interval: 100 msec
XR Frame Limit: 25
XR Poll Rate String is 0.25 1 1 3 3 6 6 20
XR Fragmentation Threshold: 540
WLAN Access Point wlan1 ->