sanitariu
МаглыРепутація
0 ОбычныйО sanitariu
-
Звание
Пролетал Мимо
Посетители профиля
734 просмотра профиля
-
Hello, Do not use SSH services on bdcom OLTs !!! They will crash at some time and it is possible to erase your configruation. This happened to me at least 6-7 times on 3310C. Also they do not support newer encryption protocols. Just DISABLE ssh/http and use only telnet. You can set your terminal backspace with ctrl+H
-
I can confirm that: INTEGER: 4 - lost For INTEGER: 1 - config-failed i am not 100% sure
-
INTEGER: 1 - config-failed INTEGER: 2 - deregistered INTEGER: 3 - auto_config INTEGER: 4 - lost Only not sure about 1 ? Anyone have it ?
-
Hello, someone have full information for: iso.3.6.1.4.1.3320.101.10.1.1.26 ? As far as i know: INTEGER: 2 - deregistered ? INTEGER: 3 - auto-configured Here must have config-failed and maybe others ?
-
Super thanks So 9 power-off and 8 wire-down. Do you have other good information ?
-
Yes here it is.... MIB for all.rar
-
Hello, I know this: llidOnuBindLastDeregReason------------1.3.6.1.4.1.3320.101.11.1.1.11 But i can not figure out what means the numbers. I've got results like 7,8,9,0. Anyone can test it ?
-
You can safely use inner-onu-switch command. There is no problem with it. The only problem you may see is no limit traffic between clients (internal). But i think this is okay.
-
3310C or 3310B ? If it is 3310C you must upgrade firmware to version 46085. On old version i had once all pon disconnects but it is stable. P3608 is stable too. I have never had any issues.
-
time-zone tz 3 0 ntp query-interval 1200 ntp server 10.90.90.xx i use like that and it is working perfect
-
There is an image here (ftp://ftp.romsat.ua/pub/Lan/BDCOM/P3310C/) Just download it. Use anonymous ftp.
-
Do not forget this command: Switch_config#epon local-mac forward
-
I use this one: BDCOM P3310C Software, Version 10.1.0E Build 43480 It is working stable.
-
sanitariu підписався на BDCOM p3310 прошивка
-
Hm, then it seems something wrong with OLT ? Do you have that problem only on one OLT device or all the same ?
-
Hi, I do not see anything strange. You are using multicasts. May be try to raise storm filters. Also on new versions you must enable this command: "epon local-mac forward" Although you do not have mac addresses like: X2:XX:XX:XX:XX:XX,X6:XX:XX:XX:XX:XX, XA:XX:XX:XX:XX:XX, XE:XX:XX:XX:XX:XX Some day you can buy such onus and they will make disconnects. This is another BDCOM trick to try making their OLTs work only with bdcom onus. Also this is the correct oams: epon oam-version 1 0x30 epon oam-version 2 0x21 epon oam-version 3 0x20 You can change them. You can try to enable the foll