meritonis

nothing is changing again processors 99% ?

#show loop-detection global LoopDetectSwitch:disable AutoShutdownSwitch:disable ActiveDetect:disable AutoCheckTime:3600(s) LoopDetectInterval:120(s) I did this should anything else be?

#show loop-detection global LoopDetectSwitch:disable AutoShutdownSwitch:disable ActiveDetect:disable AutoCheckTime:10(s) LoopDetectInterval:120(s) ------------------------------------------------- show loop-detection interface gpon-olt_1/2/1 Port Status ----------------------------------------------------------------------------- gpon-olt_1/2/1 disable should they beloopedetect enabled?

Hello I have a GPON card problem the CPU always stands 99% GTGO GTGOG 8 120301 V1.2.5P3 INSERVICE -------firmware 1/1/2 gtgogv125p3t13_r0.pat 2.0 2018-02-03 16:19:03 ACTIVE 1/1/2 gtgogv125p3t13_r1.pat 2.0 2018-02-03 16:19:05 ACTIVE 1/1/2 gtgogv125p3t13_r2.pat 2.0 2018-02-03 16:19:07 ACTIVE 1/1/2 gtgogv125p3t13_r4.pat 2.0 2018-02-03 16:19:09 ACTIVE 1/1/2 gtgogv125p3t13_r5.pat 2.0 2018-02-03 16:19:13 ACTIVE 1/1/2 gtgogv125p3t13_r7.pat 2.0

Hi! can you tell me what version of netnumen you use i have this version V12.13.20T50, do you have any newer version because zte c320 with firmware v2.1.0 is having a problem with window shadows, lack of profiles, not found some comands,some give it with error etc. Thnaks,

Here's where i firmware and patch SCXN.BT SCXN.FW SCXN_LX.MVR SCXNV125P3T13_r0.pat SCXNV125P3T13_r1.pat SCXNV125P3T13_r2.pat SCXNV125P3T13_r3.pat SCXNV125P3T13_r4.pat SCXNV125P3T13_r6.pat

smxa card has had the v1.2.5p3 version, but i decided the version v2.1.0 but it is not only restart? how can I activate any tftp or something like how to put firmware on it?

I just got a zte c320 having version 1.2.5p3, but I did install version v2.1.0, but I'm not starting. Please can you help me with it!

Please i need the firmware for ZTE-F660V6 V6.0.2P2T2 is there anyone who can share it? thanks,

Please Share it?

I only have a patch for the GTGH slot I wanted to ask if there are other patches or only if I can get it from you, is for version 1.2.5P3 I only have this patch: gtghgv125p3t13_r0.pat

friend, I have zte c300 Gpon but why some clients can activate the mcast reciveport is bound, eg port 1-4 all client are is recive port bound is ok, while others who are 5-8 slot do not accept reciveport is all unbound. All client are the GTGO Slot, i have same vlan multicast not different. while at a different Gpon slot the whole time is processor 100% why?

Configuration onus for IPTV and internet has become different vlan vport but is the same as for the internet as well as IPTV eg vport1 all are A configuration is correct or should the onus be different vport because I delay DHCP client 15-20min delayed until you get the equipment during restarting? They should be all the vport1 or not? Best regards, M.E

when scoring in interface epon_onu command to activate this message to appear: %Code 40589: Card is not in hardware authentication mode now.

Delayed Auto DHCP: Qhy when turning all at once onu 15-20min dhcp delayed until all this here gives dhcp onu. Onu light if it gets already a dhcp at once within 30 sec. Processor card is okay not increase, this problem occurs only when all onu switched for a time and dhcp 20min delayed until something that does not even Internet or IPTV due to dhcp?

What is the difference between HGU and SFU ?

Hello to everyone, I wanted to ask whether there is any opportunity to send a script that you have configured as ZTE C300, registration of EPON ONU, VLAN, Internet service etc?

ZTE C300: Why stop electricity whenever all the equipment ONU 20-30 sec normal restart, but he did not give WiFi or IPTV dhcp this problem lasts 10-20min ONU is online but does not issue dhcp and when you consent Than all the issues after 10min why? a configuration is any mistake or why?

please if you have any solution why is this problem or ask where the other solutions?

Please if you have any solution why is this problem or ask where the other solutions?

that photo was requested hope that helps..

Onu when all at once they start on ZTE OLT delays when issuing 10-20min to the Internet why? Whenever a stop current or terminated in the pon, onu stay online all had it not issuing ZTE OLT Services until actual profile of the type shown otherwise onu for 10-20min down with N/A? Best Regards,

Although electricity whenever stop up late ont the actual window type out with N / A few minutes now issued workshops, Ont are active but the actual type out with N / a then issued? Have you any idea how to solve the problem moon that this is happening more often? I made pictures for the card version as well as the version 3 types have onu. an example of how this happens, This delay lasts 5-10 min der the moment where the window actual type model onu marks. the client device is active but does not appear on the actual type active?