Уважаемый madf , подскажите в какую сторону копать
Centos 5.2
freeradius-1.1.3
stargazer 2.406
В логе старгейзера пусто, есть только сведения о старте.
radiusd -X
rad_recv: Access-Request packet from host 127.0.0.1:32783, id=247, length=148
Service-Type = Framed-User
Framed-Protocol = PPP
User-Name = "test"
MS-CHAP-Challenge = 0x2fc419d12f81c6bc87ffcf0b9e2bb3a4
MS-CHAP2-Response = 0x4b00133e52ad0172a50163bbe435e71f22e80000000000000000edff64ccd5e494acaf5f38f4c95de2f4763b95ddda92068b
Calling-Station-Id = "192.168.59.125"
NAS-IP-Address = 127.0.0.1
NAS-Port = 20
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap'
modcall[authorize]: module "mschap" returns ok for request 6
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 6
users: Matched entry DEFAULT at line 152
users: Matched entry DEFAULT at line 171
users: Matched entry DEFAULT at line 183
modcall[authorize]: module "files" returns ok for request 6
rlm_stg: stg_authorize()
rlm_stg: stg_authorize() user name defined as 'test'
rlm_stg: stg_authorize() request username field: 'test'
rlm_stg: stg_authorize() Service-Type defined as 'Framed-User'
modcall[authorize]: module "stg" returns updated for request 6
modcall: leaving group authorize (returns updated) for request 6
rad_check_password: Found Auth-Type MS-CHAP
auth: type "MS-CHAP"
Processing the authenticate section of radiusd.conf
modcall: entering group MS-CHAP for request 6
rlm_stg: stg_authenticate()
rlm_stg: stg_authenticate() Service-Type defined as 'Framed-User'
modcall[authenticate]: module "stg" returns noop for request 6
rlm_mschap: No User-Password configured. Cannot create LM-Password.
rlm_mschap: No User-Password configured. Cannot create NT-Password.
rlm_mschap: Told to do MS-CHAPv2 for test with NT-Password
rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication.
rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
modcall[authenticate]: module "mschap" returns reject for request 6
modcall: leaving group MS-CHAP (returns reject) for request 6
auth: Failed to validate the user.
Delaying request 6 for 1 seconds
Finished request 6
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 247 to 127.0.0.1 port 32783
Waking up in 3 seconds...
--- Walking the entire request list ---
Cleaning up request 6 ID 247 with timestamp 4addfa28
Nothing to do. Sleeping until we see a request.
radiusd.conf
prefix = /usr
exec_prefix = /usr
sysconfdir = /etc
localstatedir = /var
sbindir = /usr/sbin
logdir = ${localstatedir}/log/radius
raddbdir = ${sysconfdir}/raddb
radacctdir = ${logdir}/radacct
confdir = ${raddbdir}
run_dir = ${localstatedir}/run/radiusd
log_file = ${logdir}/radius.log
libdir = /usr/lib
pidfile = ${run_dir}/radiusd.pid
user = radiusd
group = radiusd
max_request_time = 30
delete_blocked_requests = no
cleanup_delay = 5
max_requests = 1024
bind_address = *
port = 0
hostname_lookups = no
allow_core_dumps = no
regular_expressions = yes
extended_expressions = yes
log_stripped_names = no
log_auth = no
log_auth_badpass = no
log_auth_goodpass = no
usercollide = no
lower_user = no
lower_pass = no
nospace_user = no
nospace_pass = no
checkrad = ${sbindir}/checkrad
security {
max_attributes = 200
reject_delay = 1
status_server = no
}
proxy_requests = yes
$INCLUDE ${confdir}/proxy.conf
$INCLUDE ${confdir}/clients.conf
snmp = no
$INCLUDE ${confdir}/snmp.conf
thread pool {
start_servers = 5
max_servers = 32
min_spare_servers = 3
max_spare_servers = 10
max_requests_per_server = 0
}
modules {
pap {
encryption_scheme = crypt
}
chap {
authtype = CHAP
}
pam {
pam_auth = radiusd
}
unix {
cache = no
cache_reload = 600
shadow = /etc/shadow
radwtmp = ${logdir}/radwtmp
}
$INCLUDE ${confdir}/eap.conf
mschap {
}
ldap {
server = "ldap.your.domain"
basedn = "o=My Org,c=UA"
filter = "(uid=%{Stripped-User-Name:-%{User-Name}})"
start_tls = no
access_attr = "dialupAccess"
dictionary_mapping = ${raddbdir}/ldap.attrmap
ldap_connections_number = 5
timeout = 4
timelimit = 3
net_timeout = 1
}
realm IPASS {
format = prefix
delimiter = "/"
ignore_default = no
ignore_null = no
}
realm suffix {
format = suffix
delimiter = "@"
ignore_default = no
ignore_null = no
}
realm realmpercent {
format = suffix
delimiter = "%"
ignore_default = no
ignore_null = no
}
realm ntdomain {
format = prefix
delimiter = "\\"
ignore_default = no
ignore_null = no
}
checkval {
item-name = Calling-Station-Id
check-name = Calling-Station-Id
data-type = string
}
preprocess {
huntgroups = ${confdir}/huntgroups
hints = ${confdir}/hints
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
}
files {
usersfile = ${confdir}/users
acctusersfile = ${confdir}/acct_users
preproxy_usersfile = ${confdir}/preproxy_users
compat = no
}
detail {
detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d
detailperm = 0600
}
acct_unique {
key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port"
}
radutmp {
filename = ${logdir}/radutmp
username = %{User-Name}
case_sensitive = yes
check_with_nas = yes
perm = 0600
callerid = "yes"
}
radutmp sradutmp {
filename = ${logdir}/sradutmp
perm = 0644
callerid = "no"
}
attr_filter {
attrsfile = ${confdir}/attrs
}
counter daily {
filename = ${raddbdir}/db.daily
key = User-Name
count-attribute = Acct-Session-Time
reset = daily
counter-name = Daily-Session-Time
check-name = Max-Daily-Session
allowed-servicetype = Framed-User
cache-size = 5000
}
sqlcounter dailycounter {
counter-name = Daily-Session-Time
check-name = Max-Daily-Session
sqlmod-inst = sql
key = User-Name
reset = daily
query = "SELECT SUM(AcctSessionTime - \
GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
FROM radacct WHERE UserName='%{%k}' AND \
UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
}
sqlcounter monthlycounter {
counter-name = Monthly-Session-Time
check-name = Max-Monthly-Session
sqlmod-inst = sql
key = User-Name
reset = monthly
query = "SELECT SUM(AcctSessionTime - \
GREATEST((%b - UNIX_TIMESTAMP(AcctStartTime)), 0)) \
FROM radacct WHERE UserName='%{%k}' AND \
UNIX_TIMESTAMP(AcctStartTime) + AcctSessionTime > '%b'"
}
always fail {
rcode = fail
}
always reject {
rcode = reject
}
always ok {
rcode = ok
simulcount = 0
mpp = no
}
expr {
}
digest {
}
exec {
wait = yes
input_pairs = request
}
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = request
output_pairs = reply
}
ippool main_pool {
range-start = 192.168.1.1
range-stop = 192.168.3.254
netmask = 255.255.255.0
cache-size = 800
session-db = ${raddbdir}/db.ippool
ip-index = ${raddbdir}/db.ipindex
override = no
maximum-timeout = 0
}
stg {
local_port = 6667
server = localhost
port = 7666
password = 123456
}
}
instantiate {
stg
exec
expr
}
authorize {
preprocess
chap
mschap
suffix
eap
files
stg
}
authenticate {
Auth-Type PAP {
stg
pap
}
Auth-Type CHAP {
stg
chap
}
Auth-Type MS-CHAP {
stg
mschap
}
unix
eap
}
preacct {
preprocess
acct_unique
suffix
files
}
accounting {
detail
unix
radutmp
stg
}
session {
radutmp
}
post-auth {
stg
}
pre-proxy {
}
post-proxy {
eap
}
В качестве базы stargazer испольщую тектовые файлы.
