Пошук по сайту

Я новачок, так що відразу палками не бийте, ткніть носом в правильне місце Все працює на одному сервері FreeBSD Ubilling 1.3.8 rev 8894 Читав та мої налаштування rc.conf hostname="miso" ifconfig_vmx0="inet 172.16.0.1/24" - мережа абонів ifconfig_vmx1="inet 62.80.138.131/29" - вихід в світ (іп видумана) ifconfig_vmx2="inet 192.168.11.3/24 -arp" - мережа адміна defaultrouter="62.80.138.129" sshd_enable="YES" gateway_enable="YES" firewall.conf #!/bin/sh # firewall command FwCMD="/sbin/ipfw -q" ${FwCMD} -f flush # Interfaces setup LAN_IF="vmx0" WAN_IF="vmx1" WANFG_IF="vmx2" # Networks defines # Users ${FwCMD} table 2 add 172.16.150.0/24 ${FwCMD} table 10 add 62.80.138.134/32 #${FwCMD} add 65531 deny all from table\(10\) to any via vmx0 #${FwCMD} add 65532 deny all from any to table\(10\) via vmx0 # Safe zones ${FwCMD} table 22 add 127.0.0.1 # Safe zones allow policy ${FwCMD} add 45 allow ip from table\(22\) to me ${FwCMD} add 45 allow ip from me to table\(22\) # ssh access. #${FwCMD} add 46 deny ip from any to me dst-port 22 #${FwCMD} add 46 deny ip from me to any src-port 22 # mysql access ${FwCMD} add 47 deny ip from any to me dst-port 3306 ${FwCMD} add 47 deny ip from me to any src-port 3306 # sgconf access ${FwCMD} add 48 deny ip from any to me dst-port 5555 ${FwCMD} add 48 deny ip from me to any src-port 5555 # NAT ${FwCMD} nat 1 config log if ${WAN_IF} reset same_ports ${FwCMD} add 6000 nat 1 ip from table\(2\) to not table\(10\) out xmit ${WAN_IF} ${FwCMD} add 6001 nat 1 ip from any to me in recv ${WAN_IF} # Pass traffic for the specific subscriber without NAT ${FwCMD} add 6010 allow ip from table\(10\) to any out xmit ${WAN_IF} ${FwCMD} add 6011 allow ip from any to table\(10\) in recv ${WAN_IF} # Shaper - table 4 download speed, table 3 - upload speed ${FwCMD} add 12001 pipe tablearg ip from any to table\(4\) via ${LAN_IF} out ${FwCMD} add 12000 pipe tablearg ip from table\(3\) to any via ${LAN_IF} in # default block policy ${FwCMD} add 65533 deny all from table\(2\) to any via ${LAN_IF} ${FwCMD} add 65534 deny all from any to table\(2\) via ${LAN_IF} ${FwCMD} add 65535 allow all from any to any В вебці добавив мережу, налаштував dhcp, абонент отримує іп 62.80.138.134 з гейтом 62.80.138.129 Як абоненту налаштувати білу іп 62.80.138.134?