Пошук по сайту

Оптовая распродажа медиаконвертеров При покупке от 50-ти шт. цена 23$ (576 грн.) за шт. Все оборудование новое! Гарантия год! Курс 26,2 Любая удобная форма оплаты. Обращаться в личку или по телефону: 063-286-05-79 ---------------------------------------------------------------------------- General Description This product supports IEEE802.3U/ 100Base-Tx/Fx protocol, as well as full duplex and half duplex mode. This manual is for 10/100M transceivers. Features þ In conformity to IEEE802.3 10 Base-T,IEEE802.3u 100 Base-TX/FX þ Support 288Kb data buffer,1K MAC address þ Support Back pressure flow control for full duplex þ IEEE802.3 X and half duplex þ Support Automatic identification of MDI/MDI-X cross line þ Support max.9K bytes transmission data packet length þ Support desktop and wall mounted installation Technical Parameter - Standard: In conformity to IEEE802.3 10 Base-T,IEEE 802.3u 100 Base-TX/FX - Connector:one fiber interface and one rj45 interface - Support full duplex and half duplex - Power parameters: built-in :110-265VAC or 48V DC or 12 DC(optional) outside:5V DC 1A - Working temperature:-40­—85℃ - Storage temperature:-65----150℃ - Relative humidity:5%-90% - Fiber kinds: Multimode:50/125 , 62.5/125 or 100/140um Single mode:8.3/125 ,8.7/125 ,9/125 or 10/125um - Size: 83mm×57.40mm×22.5mm Explanation for LED indicator lamp LED indicator lamps serve as device monitoring and trouble display. The following is the explanation for each LED indicator lamp. LED indicator lamp - Status - Explanation FX Link/Act - On - Connection status display for fiber link. “ON” indicates that Fiber link is in correct connection. - Blink - Active status display of fiber link. “Blink” indicates packet goes through Fx end. TP Link/Act - On - Connection status display for electric link. “ON” indicates that electric link is in correct connection. - Blink - Active status display of fiber link. “Blink” indicates packet goes through Tx end. PWR - On - Power is on and normal. SD - On - Fiber signal is detected. 100 - On - Transfer rate of electric interface is 100Mbps. - Off - Rate of electric interface is 10Mbps