FreeBSD 7.2 немогу поднять pppoe

[stvol 4]

Решил перевести модемы в бриджи ибо дуреют,от торентов в режиме роутера.Заодно машинку собрал посильнее с хорошими сетевками.

Но застрял уже на старте чет не работает подключение pppoe.

делал по разному последнняя попытка была с таким конфигом:

 

default:

set log Phase tun command

enable dns

set mru 1492

set mtu 1492

set timeout 0

set redial 0 0

set reconnect 3 0

accept dns

ukr:

set device PPPoE:fxp0

set authname логин

set authkey пас

enable lqr

set lqrperiod 10

enable lqr echo

enable echo

set dial

set login

add default HISADDR

 

При включении в режиме роутера пинги проходят без проблем.А при мосте и запуске ппое,глухарь.

вот что пишет в логе

Sep 24 13:56:04 192 ppp[1203]: tun0: Phase: deflink: Connected!

Sep 24 13:56:04 192 ppp[1203]: tun0: Phase: deflink: opening -> dial

Sep 24 13:56:04 192 ppp[1203]: tun0: Phase: deflink: dial -> carrier

Sep 24 13:56:05 192 ppp[1203]: tun0: Phase: Received NGM_PPPOE_ACNAME (hook "DP-JE-L1")

Sep 24 13:56:05 192 ppp[1203]: tun0: Phase: Received NGM_PPPOE_SESSIONID

Sep 24 13:56:05 192 ppp[1203]: tun0: Phase: Received NGM_PPPOE_SUCCESS

Sep 24 13:56:05 192 ppp[1203]: tun0: Phase: deflink: carrier -> login

Sep 24 13:56:05 192 ppp[1203]: tun0: Phase: deflink: login -> lcp

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: deflink: Disconnected!

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: deflink: lcp -> logout

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: deflink: logout -> hangup

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: deflink: Disconnected!

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: deflink: Connect time: 17 secs: 0 octets in, 170 octets out

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: deflink: 0 packets in, 220 packets out

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: total 10 bytes/sec, peak 13 bytes/sec on Fri Sep 24 13:56:09 2010

Sep 24 13:56:21 192 ppp[1203]: tun0: Phase: deflink: hangup -> opening

Такими циклами.

Бспокоят строчки с NGM я так понимаю что это что-то связаное с нетграфом.Но ведь я не собирался с ним замарачиватся,а с простым натом итд.

[ПытливыйУм 0]

делал по разному последнняя попытка была с таким конфигом:

Попробуй так:

Ukrtel:

set device PPPoE:rl1

set MTU 1492

set MRU 1492

set dial

set crtscts off

set speed sync

enable lqr

set lqrperiod 10

enable lqr echo

enable echo

disable deflate

disable pred1

disable vjcomp

disable acfcomp

disable protocomp

#enable dns

set log Phase LCP IPCP CCP Warning Error Alert

set ifaddr 10.0.0.1/0 10.0.0.2/0 0.0.0.0 0.0.0.0

add default HISADDR

set cd 5

set login

set timeout 0

set redial 3 0

set reconnect 4 0

set authname ******@dsl.ukrtel.net

set authkey ********

[stvol 4]

попробовал вот такой выхлоп(

Sep 24 18:46:33 192 ppp[1858]: Phase: deflink: Enter pause (4) for redialing.

Sep 24 18:46:37 192 ppp[1858]: Phase: deflink: Connected!

Sep 24 18:46:37 192 ppp[1858]: Phase: deflink: opening -> dial

Sep 24 18:46:37 192 ppp[1858]: Phase: deflink: dial -> carrier

Sep 24 18:46:38 192 ppp[1858]: Phase: Received NGM_PPPOE_ACNAME (hook "DP-JE-R1")

Sep 24 18:46:38 192 ppp[1858]: Phase: Received NGM_PPPOE_SESSIONID

Sep 24 18:46:38 192 ppp[1858]: Phase: Received NGM_PPPOE_SUCCESS

Sep 24 18:46:38 192 ppp[1858]: Phase: deflink: carrier -> login

Sep 24 18:46:38 192 ppp[1858]: Phase: deflink: login -> lcp

Sep 24 18:46:38 192 ppp[1858]: LCP: FSM: Using "deflink" as a transport

Sep 24 18:46:38 192 ppp[1858]: LCP: deflink: State change Initial --> Closed

Sep 24 18:46:38 192 ppp[1858]: LCP: deflink: State change Closed --> Stopped

Sep 24 18:46:39 192 ppp[1858]: LCP: deflink: LayerStart

Sep 24 18:46:39 192 ppp[1858]: LCP: deflink: SendConfigReq(1) state = Stopped

Sep 24 18:46:39 192 ppp[1858]: LCP: MRU[4] 1492

Sep 24 18:46:39 192 ppp[1858]: LCP: MAGICNUM[6] 0xda3dcac9

Sep 24 18:46:39 192 ppp[1858]: LCP: QUALPROTO[8] proto c025, interval 10000ms

Sep 24 18:46:39 192 ppp[1858]: LCP: deflink: State change Stopped --> Req-Sent

Sep 24 18:46:42 192 ppp[1858]: LCP: deflink: SendConfigReq(1) state = Req-Sent

Sep 24 18:46:42 192 ppp[1858]: LCP: MRU[4] 1492

Sep 24 18:46:42 192 ppp[1858]: LCP: MAGICNUM[6] 0xda3dcac9

Sep 24 18:46:42 192 ppp[1858]: LCP: QUALPROTO[8] proto c025, interval 10000ms

Sep 24 18:46:45 192 ppp[1858]: LCP: deflink: SendConfigReq(1) state = Req-Sent

Sep 24 18:46:45 192 ppp[1858]: LCP: MRU[4] 1492

Sep 24 18:46:45 192 ppp[1858]: LCP: MAGICNUM[6] 0xda3dcac9

Sep 24 18:46:45 192 ppp[1858]: LCP: QUALPROTO[8] proto c025, interval 10000ms

Sep 24 18:46:48 192 ppp[1858]: LCP: deflink: SendConfigReq(1) state = Req-Sent

Sep 24 18:46:48 192 ppp[1858]: LCP: MRU[4] 1492

Sep 24 18:46:48 192 ppp[1858]: LCP: MAGICNUM[6] 0xda3dcac9

Sep 24 18:46:48 192 ppp[1858]: LCP: QUALPROTO[8] proto c025, interval 10000ms

Sep 24 18:46:51 192 ppp[1858]: LCP: deflink: SendConfigReq(1) state = Req-Sent

Sep 24 18:46:51 192 ppp[1858]: LCP: MRU[4] 1492

Sep 24 18:46:51 192 ppp[1858]: LCP: MAGICNUM[6] 0xda3dcac9

Sep 24 18:46:51 192 ppp[1858]: LCP: QUALPROTO[8] proto c025, interval 10000ms

Sep 24 18:46:54 192 ppp[1858]: LCP: deflink: LayerFinish

Sep 24 18:46:54 192 ppp[1858]: LCP: deflink: State change Req-Sent --> Stopped

Sep 24 18:46:54 192 ppp[1858]: LCP: deflink: State change Stopped --> Closed

Sep 24 18:46:54 192 ppp[1858]: LCP: deflink: State change Closed --> Initial

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: Disconnected!

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: lcp -> logout

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: logout -> hangup

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: Disconnected!

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: Connect time: 17 secs: 0 octets in, 120 octets out

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: 0 packets in, 35 packets out

Sep 24 18:46:54 192 ppp[1858]: Phase: total 7 bytes/sec, peak 9 bytes/sec on Fri Sep 24 18:46:42 2010

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: hangup -> opening

Sep 24 18:46:54 192 ppp[1858]: Phase: deflink: Enter pause (4) for redialing.

[stvol 4]

Ну че есть какие-нить соображения?Подскажите плз.Весь извелся.