Cisco ASR 1004

[yuzyk 5]

Доброго дня!

Купили б/у Cisco asr1004 з RP1 і ESP20 на борту, сіпа поки що нема.

На іос хе 2.6 (12,2) всі процесори бачаться все ок, правда температура єсп20 - 45-50 градусів.

На іос хе 3,* (пробував різні версії) єсп20 безперервно ребутиться, і видає наступні помилки  

 

 

*May 20 12:07:50.958: %PMAN-3-PROCHOLDDOWN: F0: pman.sh:  The process cman_fp has been helddown (rc 134)

*May 20 12:07:51.033: %PMAN-0-PROCFAILCRIT: F0: pvp.sh:  A critical process cman_fp has failed (rc 134)

*May 20 12:07:56.160: %CMRP-3-CHASSIS_MONITOR_ONLINE_TIME_EXCEEDED: R0/0: cmand:  Reloading F0 because it has failed to come online

 

Підкажіть куди копати, в чому може бути проблема?  

[awk 1]

На ESP20 есть помнится своя консоль(на плате за передней панелью), гляньте

что туда выводится, может чего прояснится.

[yuzyk 5]

в консолі есп20:

 

cpp_ha: %CPPHA-3-FAULT: CPP:0 desc:CPP Client process failed: FMAN-FP det:HA class:CLIENT_SW sev:FATAL id:1 cppstate:RUNNING res:UNKNOWN flags:0x0 cdmflags:0x0

[Єгор 1]

Ось що видає на Ваш вивід Cisco Output Interpreter:

ERROR MESSAGE NOTIFICATIONS (if any)

%PMAN-0-PROCFAILCRIT (x1): A critical process [chars] has failed (rc [int])

Explanation: A process important to the functioning of the router has failed.

Recommended Action: Note the time of the message and investigate the error message
logs to learn more about the problem. If the problem persists, copy the error
message and the output of show platform software tech-support into a plaintext
file and contact Cisco technical support with the gathered information.

%PMAN-3-PROCHOLDDOWN (x1): The process [chars] has been helddown (rc [int])

Explanation: The process was restarted too many times with repeated failures
and has been placed in the holddown state.

Recommended Action: This message will appear with other messages related to the
process. Check the other messages to determine the reason for the failures and
see if corrective action can be taken. If the problem persists, copy the error
messages and the output of show platform software tech-support into a plaintext
file and contact Cisco technical support.

%CMRP-3-CHASSIS_MONITOR_ONLINE_TIME_EXCEEDED (x1): Reloading [chars] because
it has failed to come online

Explanation: A FRU has failed to come online within the maximum boot time.

Recommended Action: Remove the FRU from the chassis is the FRU is continously
reloaded.

%CPPHA-3-FAULT (x1): CPP:[dec] desc:[chars] det:[chars] class:[chars] sev:[chars]
id:[dec] cppstate:[chars] res:[chars] flags:[hex] cdmflags:[hex]

Explanation: A CPP fault has occurred.

Recommended Action: No action is required.

%CPPHA-3-FAULTCRASH (x): CPP [dec] unresolved fault detected, initiating crash
dump.

Explanation: A unresolved fault detected, initiating crash dump.

Recommended Action: Copy the message exactly as it appears on the console or
in the system log. Research and attempt to resolve the issue using the tools and
utilities provided at http://www.cisco.com/tac. With some messages, these tools
and utilities will supply clarifying information. Search for resolved software
issues using the Bug Toolkit at http://www.cisco.com/pcgi-bin/Support/Bugtool/launch_bugtool.pl.
If you still require assistance, open a case with the Technical Assistance Center
via the Internet at http://www.cisco.com/cgi-bin/front.x/case_tools/caseOpen.pl,
or contact your Cisco technical support representative and provide the representative
with the information you have gathered. Attach the following information to your
case in nonzipped, plain-text (.txt) format: the output of the show logging and
show tech-support commands and your pertinent troubleshooting logs.

%CPPHA-3-FAULTRATE (x): CPP:[dec] desc:[chars] det:[chars] class:[chars] sev:[chars]
id:[dec] cppstate:[chars] res:[chars] flags:[hex] cdmflags:[hex]

Explanation: A CPP fault has occurred.

Recommended Action: No action is required.

Відредаговано 2013-05-22 06:13:02 Єгор

[Владимир ака Cisco Сейлер 12]

Если брали на ибей, ESP запросто может быть мертвый или рефнутый, нужно начать с "подкидывания" другого модуля и диагностики шасси без него, что будет писать, какие будут реакции. 

[yuzyk 5]

а де можна взяти на тест ESP? А взагалі хтось займається в Україні ремонтам даного обладнання, є ще не робоча карта SPA1X10GE-L-V2 (бралась на ебеї за смішні гроші як AS-IS)