ageNT_666

можете проверить 1г модули с 100м медиками заводятся?

Мы пользуемся только финмарком, за 3 года проблем не было вообще. Лежит одна трасса южкабель 800м, за 1 год утянулся метров так на 6-8, но уже почти как год нормально стал себя вести, из за этого доверие к южу пропало совсем!

например?

planet GSW-2416sf у меня несколько штучек стоит, проблем не было уже 2 года вообще, единственное очень жаль что SFP дырки 1г и не могут работать с 100м медиками даже если модуль 100м втыкаешь. отлично работает с 100м медиками Ну и как Вы этого достигли, максимум что получалось - это переставляя порт на 100м вроде бы как заводится но через линк ничего не бегает!

Ну тогда DES-3200-28f я себе думаю такой брать для линков по частному сектору, то уже горы медиков достали))

planet GSW-2416sf у меня несколько штучек стоит, проблем не было уже 2 года вообще, единственное очень жаль что SFP дырки 1г и не могут работать с 100м медиками даже если модуль 100м втыкаешь.

+1 абиллс

Ну я и не говорю что готовить могу, тема висит около месяца, могли бы подсказать в чем могла быть причина. Настроил за неделю 3 серва и не на одном из них нет боков, тьфу-тьфу)), из железа на них ничего не менялось(на 1 только винт поменяли), раньше на 10 мегах обрывало каждые 5 минут, а сейчас уже около суток торрент тянит 20 мег и нормально.

Поставил Debian все гуд! конфиги сравнивал абсолютно одинаковые, вывод напрашивается сам))

Приехали точки доступа, забыл что они идут без блоков питания, а включить нужно срочно, можно ли как нибудь запустить их от 12V блока питания, задать на синюю пару "+" а на коричневую "-"? ктото уже так запускал?

Перевёл основной серв на rlm_exec всё равно обрывы, поидее с rlm_perl всё нормально, буду сейчас подымать ещё один серв и на нем тестировать, то както не очень хорошо на основном серваке тестировать!(( выдержка из freeradius -X ++[perl] returns ok Sending Accounting-Response of id 198 to 127.0.0.1 port 49947 Finished request 1032. Cleaning up request 1032 ID 198 with timestamp +538 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 127.0.0.1 port 59413, id=199, length=143 Acct-Session-Id = "4D47C7E725D300" User-Name = "test1" Acct-Status-Type = Interim-Update Service-Type = Framed-User Framed-Protocol = PPP Acct-Authentic = RADIUS Acct-Session-Time = 480 Acct-Output-Octets = 240023741 Acct-Input-Octets = 31951044 Acct-Output-Packets = 283352 Acct-Input-Packets = 129309 Acct-Output-Packets = 283352 Acct-Input-Packets = 129309 Calling-Station-Id = "10.45.2.100" NAS-Port-Type = Async Framed-IP-Address = 91.214.*.* NAS-IP-Address = 127.0.0.1 NAS-Port = 114 Acct-Delay-Time = 0 +- entering group preacct {...} ++[preprocess] returns ok +- entering group accounting {...} perl_pool: item 0xb2a4300 asigned new request. Handled so far: 33 found interpetator at address 0xb2a4300 rlm_perl: Added pair NAS-Port-Type = Async rlm_perl: Added pair Acct-Input-Octets = 31951044 rlm_perl: Added pair Acct-Session-Id = 4D47C7E725D300 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Acct-Authentic = RADIUS rlm_perl: Added pair Acct-Status-Type = Interim-Update rlm_perl: Added pair Acct-Output-Packets = 283352 rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair Acct-Output-Octets = 240023741 rlm_perl: Added pair Acct-Session-Time = 480 rlm_perl: Added pair Calling-Station-Id = 10.45.2.100 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair User-Name = test1 rlm_perl: Added pair Acct-Input-Packets = 129309 rlm_perl: Added pair Framed-IP-Address = 91.214.*.* rlm_perl: Added pair NAS-Port = 114 rlm_perl: Added pair Acct-Delay-Time = 0 perl_pool total/active/spare [32/0/32] Unreserve perl at address 0xb2a4300 Sending Accounting-Response of id 1 to 127.0.0.1 port 45523 Finished request 1091. Cleaning up request 1091 ID 1 with timestamp +548 Going to the next request Waking up in 2.7 seconds. rad_recv: Accounting-Request packet from host 127.0.0.1 port 54179, id=2, length=149 Acct-Session-Id = "4D47C7E725D300" User-Name = "test1" Acct-Status-Type = Stop Service-Type = Framed-User Framed-Protocol = PPP Acct-Authentic = RADIUS Acct-Session-Time = 490 Acct-Output-Octets = 240023741 Acct-Input-Octets = 31962394 Acct-Output-Packets = 283352 Acct-Input-Packets = 129488 Calling-Station-Id = "10.45.2.100" NAS-Port-Type = Async Acct-Terminate-Cause = Lost-Carrier Framed-IP-Address = 91.214.*.* NAS-IP-Address = 127.0.0.1 NAS-Port = 114 Acct-Delay-Time = 0 +- entering group preacct {...} ++[preprocess] returns ok +- entering group accounting {...} perl_pool: item 0xa5f1dd8 asigned new request. Handled so far: 35 found interpetator at address 0xa5f1dd8 rlm_perl: Added pair NAS-Port-Type = Async rlm_perl: Added pair Acct-Input-Octets = 31962394 rlm_perl: Added pair Acct-Session-Id = 4D47C7E725D300 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Acct-Authentic = RADIUS rlm_perl: Added pair Acct-Status-Type = Stop rlm_perl: Added pair Acct-Output-Packets = 283352 rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair Acct-Output-Octets = 240023741 rlm_perl: Added pair Acct-Terminate-Cause = Lost-Carrier rlm_perl: Added pair Acct-Session-Time = 490 rlm_perl: Added pair Calling-Station-Id = 10.45.2.100 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair User-Name = test1 rlm_perl: Added pair Acct-Input-Packets = 129488 rlm_perl: Added pair Framed-IP-Address = 91.214.*.* rlm_perl: Added pair NAS-Port = 114 rlm_perl: Added pair Acct-Delay-Time = 0 perl_pool total/active/spare [32/0/32] Unreserve perl at address 0xa5f1dd8

Intel pro 1000 mt desktop

дело в том что сесии обрываются и когда канал не в пике пробывал в сегодня в 7 часов утра. мониторинг стоит какти в пике более 200 сесий и pps около 9к пакетов. сетевая отпадает, пробывал на другом серваке с сетевой 8169 и нагрузкой намного меньше, всеравно обрыв идет на 10мегах через 5-10 минут. пробывал на тестовом стенде серв с абиллс 0.4 и rlm_exec а не rlm_perl скачал 3.5 гига обрыва небыло! подозрение падает на rlm_perl завтрв попробую основной серв перевести на rlm_exec и я думаю что сразу будет понятно.

дело в том что сесии обрываются и когда канал не в пике пробывал в сегодня в 7 часов утра. мониторинг стоит какти в пике более 200 сесий и pps около 9к пакетов. сетевая отпадает, пробывал на другом серваке с сетевой 8169 и нагрузкой намного меньше, всеравно обрыв идет на 10мегах через 5-10 минут. пробывал на тестовом стенде серв с абиллс 0.4 и rlm_exec а не rlm_perl скачал 3.5 гига обрыва небыло! подозрение падает на rlm_perl завтрв попробую основной серв перевести на rlm_exec и я думаю что сразу будет понятно.

Пинги бегают постоянно, <1мс 1024 пакетом; 3мс 12000 Потерь нет вообще!!

Трафика ходит немного 50 инет + локальный(междугородний) около 200 мег в пике! В локалку смотрит десктопная интеловая 1г сетевушка!

Ну это у меня на тестовом компе, стоит 7, и начинают жаловаться клиенты у клиентов не знаю что, сегодня попробую на десктопной машинке с линуксом, и через роутер! чтоб уже точно определить проблему! а активка тут причем? на меньших тарифах то не рвется... я бы начал рыть в сторону pptpd У человека Lost Carrier. Session terminated when modem dropped DCD(Data Carrier Detect). This can either mean the user or his modem hung up the phone from their end, in which case there is no problem, or can mean that the line was dropped or took a noise hit too severe for the modems to recover from, or can mean that the local modem dropped DCD for some other reason. Also sent to RADIUS Accounting. В его случае это потеря связи между серваком и клиентом. Может у него дето мыльница ушла в 10 мегабит? ... Ноут воткнут в ядро!!! в ядре планет 2416

Попробывал поставить 10 мег и запустил торрент, каждые 10 минут обрыв, причем сначала пропадает полностью инет а гдето через минуту рвется сама сессия, как я понял алив пакеты теряются Acct-Interim-Interval=60 и происходит дисконект!

Добрый день, у меня возникла проблема разрыва pptp сессий у клиентов когда я добавил новый ТП 4 Мбита, когда раздавал максимум 2 Мбита было всё отлично, в статистике сессии пишет 2 : Lost-Carrier, странно но в логах пустота. Отключается только на 4х Мбитном пакете когда качаешь долго большие объёмы, например с торрента, может отключится через 20 минут а может и через 2 часа! PS. Ubuntu 9.10, pptpd v1.3.4, FreeRADIUS Version 2.1.0, abills 0.51b.

Интересно, сколько в Киеве за такую работу платят?

Не знаю как у кого а у меня нагрузка в пике 60-70% при 250 активных изверях, нагрузка распределяется нормально на 2 ядра, проц "model name:Pentium® Dual-Core CPU E5400 @ 2.70GHz", тип авторизации pptp, биллинг - абиллс, сейчас стоит авторизация через rlm_exec, на днях буду ставить rlm_perl, когда пробовал с перлом проц в пике был 20-22%. Сетевухи стоят 8139 ещё и вланы на них крутятся, жуть!))) У знакомого стоит "Intel® Core i7 CPU 920 @ 2.67GHz" в пике 1500 юзверей онлайн. ЗЫ. за сетевухи не пинайте, поменять руки не доходят.

2 spaul спасибо, что натолкнул на мысль, я его победил)) ошибка была в /etc/freeradius/sites-enabled/default Просто нужно внимательно читать)))

/etc/freeradius/sites-enabled/default authorize { preprocess perl #abills_preauth mschap #files #abills_auth } preacct { preprocess #abills_acc perl } #post-auth { #Post-Auth-Type REJECT { #abills_postauth #} #} post-auth { Post-Auth-Type REJECT { perl } } authenticate { Auth-Type PAP { pap perl } Auth-Type CHAP { chap } Auth-Type MS-CHAP { mschap } unix eap } accounting { unix radutmp perl } /etc/freeradius/sites-enabled/inner-tunnel я его не трогал, там всё по дефолту

Это я сделал, запускается вродибы нормально, юзеры конектятся но в мониторинге не отображаются FreeRADIUS Version 2.1.0, for host i486-pc-linux-gnu, built on Sep 17 2009 at 17:22:02 Copyright (C) 1999-2008 The FreeRADIUS server project and contributors. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License v2. Starting - reading configuration files ... including configuration file /etc/freeradius/radiusd.conf including configuration file /etc/freeradius/proxy.conf including configuration file /etc/freeradius/clients.conf including files in directory /etc/freeradius/modules/ including configuration file /etc/freeradius/modules/sradutmp including configuration file /etc/freeradius/modules/acct_unique including configuration file /etc/freeradius/modules/realm including configuration file /etc/freeradius/modules/attr_rewrite including configuration file /etc/freeradius/modules/pam including configuration file /etc/freeradius/modules/passwd including configuration file /etc/freeradius/modules/expr including configuration file /etc/freeradius/modules/mac2ip including configuration file /etc/freeradius/modules/ldap including configuration file /etc/freeradius/modules/pap including configuration file /etc/freeradius/modules/krb5 including configuration file /etc/freeradius/modules/always including configuration file /etc/freeradius/modules/smbpasswd including configuration file /etc/freeradius/modules/wimax including configuration file /etc/freeradius/modules/ippool including configuration file /etc/freeradius/modules/counter including configuration file /etc/freeradius/modules/attr_filter including configuration file /etc/freeradius/modules/sql_log including configuration file /etc/freeradius/modules/exec including configuration file /etc/freeradius/modules/mschap including configuration file /etc/freeradius/modules/etc_group including configuration file /etc/freeradius/modules/preprocess including configuration file /etc/freeradius/modules/echo including configuration file /etc/freeradius/modules/files including configuration file /etc/freeradius/modules/detail.example.com including configuration file /etc/freeradius/modules/policy including configuration file /etc/freeradius/modules/radutmp including configuration file /etc/freeradius/modules/inner-eap including configuration file /etc/freeradius/modules/mac2vlan including configuration file /etc/freeradius/modules/unix including configuration file /etc/freeradius/modules/linelog including configuration file /etc/freeradius/modules/detail including configuration file /etc/freeradius/modules/chap including configuration file /etc/freeradius/modules/detail.log including configuration file /etc/freeradius/modules/checkval including configuration file /etc/freeradius/modules/digest including configuration file /etc/freeradius/modules/logintime including configuration file /etc/freeradius/modules/expiration including configuration file /etc/freeradius/eap.conf including configuration file /etc/freeradius/policy.conf including files in directory /etc/freeradius/sites-enabled/ including configuration file /etc/freeradius/sites-enabled/inner-tunnel including configuration file /etc/freeradius/sites-enabled/default including dictionary file /etc/freeradius/dictionary main { prefix = "/usr" localstatedir = "/var" logdir = "/var/log/freeradius" libdir = "/usr/lib/freeradius" radacctdir = "/var/log/freeradius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 1024 allow_core_dumps = no pidfile = "/var/run/freeradius/freeradius.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no } security { max_attributes = 200 reject_delay = 1 status_server = yes } } client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = "testing123" nastype = "other" } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = "testing123" response_window = 20 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 num_answers_to_alive = 3 num_pings_to_alive = 3 revive_interval = 120 status_check_timeout = 4 } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Instantiating modules #### instantiate { Module: Linked to module rlm_exec Module: Instantiating exec exec { wait = yes input_pairs = "request" output_pairs = "reply" shell_escape = yes } Module: Linked to module rlm_expr Module: Instantiating expr Module: Linked to module rlm_expiration Module: Instantiating expiration expiration { reply-message = "Password Has Expired " } Module: Linked to module rlm_logintime Module: Instantiating logintime logintime { reply-message = "You are calling outside your allowed timespan " minimum-timeout = 60 } } radiusd: #### Loading Virtual Servers #### server inner-tunnel { modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_pap Module: Instantiating pap pap { encryption_scheme = "auto" auto_header = no } Module: Linked to module rlm_chap Module: Instantiating chap Module: Linked to module rlm_mschap Module: Instantiating mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = no } Module: Linked to module rlm_unix Module: Instantiating unix unix { radwtmp = "/var/log/freeradius/radwtmp" } Module: Linked to module rlm_eap Module: Instantiating eap eap { default_eap_type = "md5" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 2048 } Module: Linked to sub-module rlm_eap_md5 Module: Instantiating eap-md5 Module: Linked to sub-module rlm_eap_leap Module: Instantiating eap-leap Module: Linked to sub-module rlm_eap_gtc Module: Instantiating eap-gtc gtc { challenge = "Password: " auth_type = "PAP" } Ignoring EAP-Type/tls because we do not have OpenSSL support. Ignoring EAP-Type/ttls because we do not have OpenSSL support. Ignoring EAP-Type/peap because we do not have OpenSSL support. Module: Linked to sub-module rlm_eap_mschapv2 Module: Instantiating eap-mschapv2 mschapv2 { with_ntdomain_hack = no } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_realm Module: Instantiating suffix realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } Module: Linked to module rlm_files Module: Instantiating files files { usersfile = "/etc/freeradius/users" acctusersfile = "/etc/freeradius/acct_users" preproxy_usersfile = "/etc/freeradius/preproxy_users" compat = "no" } Module: Checking session {...} for more modules to load Module: Linked to module rlm_radutmp Module: Instantiating radutmp radutmp { filename = "/var/log/freeradius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes perm = 384 callerid = yes } Module: Checking post-proxy {...} for more modules to load Module: Checking post-auth {...} for more modules to load Module: Linked to module rlm_attr_filter Module: Instantiating attr_filter.access_reject attr_filter attr_filter.access_reject { attrsfile = "/etc/freeradius/attrs.access_reject" key = "%{User-Name}" } } } modules { Module: Checking authenticate {...} for more modules to load Module: Linked to module rlm_perl Module: Instantiating perl perl { module = "/usr/abills/libexec/rlm_perl.pl" func_authorize = "authorize" func_authenticate = "authenticate" func_accounting = "accounting" func_preacct = "preacct" func_checksimul = "checksimul" func_detach = "detach" func_xlat = "xlat" func_pre_proxy = "pre_proxy" func_post_proxy = "post_proxy" func_post_auth = "post_auth" } perl { max_clones = 32 start_clones = 32 min_spare_clones = 0 max_spare_clones = 32 cleanup_delay = 5 max_request_per_clone = 0 } Module: Checking authorize {...} for more modules to load Module: Linked to module rlm_preprocess Module: Instantiating preprocess preprocess { huntgroups = "/etc/freeradius/huntgroups" hints = "/etc/freeradius/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } Module: Checking preacct {...} for more modules to load Module: Checking accounting {...} for more modules to load Module: Checking post-auth {...} for more modules to load } radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 } listen { type = "acct" ipaddr = * port = 0 } Listening on authentication address * port 1812 Listening on accounting address * port 1813 Listening on proxy address * port 1814 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1 port 33115, id=113, length=107 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "test" CHAP-Challenge = 0xca07fa2cca02fe5bfae24bfa6f7f5c91645d8a CHAP-Password = 0x66d770864b1ae903e2a9abac48db8d028f Calling-Station-Id = "178.133.164.154" NAS-IP-Address = 127.0.0.1 NAS-Port = 1 +- entering group authorize {...} ++[preprocess] returns ok perl_pool: item 0x9ce7038 asigned new request. Handled so far: 1 found interpetator at address 0x9ce7038 rlm_perl: Added pair CHAP-Password = 0x66d770864b1ae903e2a9abac48db8d028f rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Calling-Station-Id = 178.133.164.154 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair User-Name = test rlm_perl: Added pair CHAP-Challenge = 0xca07fa2cca02fe5bfae24bfa6f7f5c91645d8a rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair NAS-Port = 1 rlm_perl: Added pair Acct-Interim-Interval = 60 rlm_perl: Added pair Session-Timeout = 1656551 rlm_perl: Added pair PPPD-Upstream-Speed-Limit = 128 rlm_perl: Added pair Octets-Direction = 0 rlm_perl: Added pair Framed-IP-Address = 172.16.3.143 rlm_perl: Added pair Session-Octets-Limit = 0 rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.255 rlm_perl: Added pair PPPD-Downstream-Speed-Limit = 128 rlm_perl: Added pair Auth-Type = Accept perl_pool total/active/spare [32/0/32] Unreserve perl at address 0x9ce7038 ++[perl] returns ok ++[mschap] returns noop Found Auth-Type = Accept Auth-Type = Accept, accepting the user Sending Access-Accept of id 113 to 127.0.0.1 port 33115 Acct-Interim-Interval = 60 Session-Timeout = 1656551 PPPD-Upstream-Speed-Limit = 128 Octets-Direction = Route-IP-No Framed-IP-Address = 172.16.3.143 Session-Octets-Limit = 0 Framed-IP-Netmask = 255.255.255.255 PPPD-Downstream-Speed-Limit = 128 Finished request 0. Going to the next request Waking up in 4.9 seconds. rad_recv: Accounting-Request packet from host 127.0.0.1 port 41139, id=114, length=113 Acct-Session-Id = "4D050B7B2A7E00" User-Name = "test" Acct-Status-Type = Start Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "178.133.164.154" Acct-Authentic = RADIUS NAS-Port-Type = Async Framed-IP-Address = 172.16.3.143 NAS-IP-Address = 127.0.0.1 NAS-Port = 1 Acct-Delay-Time = 0 +- entering group preacct {...} ++[preprocess] returns ok perl_pool: item 0xa29e068 asigned new request. Handled so far: 1 found interpetator at address 0xa29e068 rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31. rlm_perl: Added pair NAS-Port-Type = Async rlm_perl: Added pair Acct-Session-Id = 4D050B7B2A7E00 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Calling-Station-Id = 178.133.164.154 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair User-Name = test rlm_perl: Added pair Acct-Authentic = RADIUS rlm_perl: Added pair Acct-Status-Type = Start rlm_perl: Added pair Framed-IP-Address = 172.16.3.143 rlm_perl: Added pair NAS-Port = 1 rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair Acct-Delay-Time = 0 perl_pool total/active/spare [32/0/32] Unreserve perl at address 0xa29e068 ++[perl] returns reject Finished request 1. Cleaning up request 1 ID 114 with timestamp +18 Going to the next request Waking up in 3.3 seconds. Cleaning up request 0 ID 113 with timestamp +16 Ready to process requests. rad_recv: Accounting-Request packet from host 127.0.0.1 port 41139, id=114, length=113 Acct-Session-Id = "4D050B7B2A7E00" User-Name = "test" Acct-Status-Type = Start Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "178.133.164.154" Acct-Authentic = RADIUS NAS-Port-Type = Async Framed-IP-Address = 172.16.3.143 NAS-IP-Address = 127.0.0.1 NAS-Port = 1 Acct-Delay-Time = 0 +- entering group preacct {...} ++[preprocess] returns ok perl_pool: item 0xa464af0 asigned new request. Handled so far: 1 found interpetator at address 0xa464af0 rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31. rlm_perl: Added pair NAS-Port-Type = Async rlm_perl: Added pair Acct-Session-Id = 4D050B7B2A7E00 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Calling-Station-Id = 178.133.164.154 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair User-Name = test rlm_perl: Added pair Acct-Authentic = RADIUS rlm_perl: Added pair Acct-Status-Type = Start rlm_perl: Added pair Framed-IP-Address = 172.16.3.143 rlm_perl: Added pair NAS-Port = 1 rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair Acct-Delay-Time = 0 perl_pool total/active/spare [32/0/32] Unreserve perl at address 0xa464af0 ++[perl] returns reject Finished request 2. Cleaning up request 2 ID 114 with timestamp +28 Going to the next request Ready to process requests. rad_recv: Accounting-Request packet from host 127.0.0.1 port 41139, id=114, length=113 Acct-Session-Id = "4D050B7B2A7E00" User-Name = "test" Acct-Status-Type = Start Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "178.133.164.154" Acct-Authentic = RADIUS NAS-Port-Type = Async Framed-IP-Address = 172.16.3.143 NAS-IP-Address = 127.0.0.1 NAS-Port = 1 Acct-Delay-Time = 0 +- entering group preacct {...} ++[preprocess] returns ok perl_pool: item 0xa6fb8a8 asigned new request. Handled so far: 1 found interpetator at address 0xa6fb8a8 rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31. rlm_perl: Added pair NAS-Port-Type = Async rlm_perl: Added pair Acct-Session-Id = 4D050B7B2A7E00 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Calling-Station-Id = 178.133.164.154 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair User-Name = test rlm_perl: Added pair Acct-Authentic = RADIUS rlm_perl: Added pair Acct-Status-Type = Start rlm_perl: Added pair Framed-IP-Address = 172.16.3.143 rlm_perl: Added pair NAS-Port = 1 rlm_perl: Added pair NAS-IP-Address = 127.0.0.1 rlm_perl: Added pair Acct-Delay-Time = 0 perl_pool total/active/spare [32/0/32] Unreserve perl at address 0xa6fb8a8 ++[perl] returns reject Finished request 3. Cleaning up request 3 ID 114 with timestamp +38 Going to the next request Ready to process requests. Меня смущает вот это "rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31."

Завязал, но возникла проблема в мониторинге не отображаются пользователи, когда возвращаю на exec всё нормально! Где баг? ЗЫ биллинг - abills 0.52b