meritonis

Hi Everyone, I have a problem with ZTE-C300, CPU is 95% and I can't execute any comand, it shows: %Code 41007: This command is forbidden,because auto writing file generation is in process. I can't even restart it from telnet. Do you have any idea?

Hi dear, I have this model: Cisco WS-C6503-E. If you need I sell it completely. file:///C:/Users/Pc/Documents/ViberDownloads/0-02-05-98a0d712509a7e11c60a40b327008e445b40c0b39c5802be4cc5a51d9da5c042_e66eaecb013fdad6.jpg

I have GTXOK card with model K not model G

I set these firmware, but the card is hwonline, not active?

Hi? I have ZTE card GTXO, but the zte firmware is v1.2.5P3. Can you share the firmware v1.2.5p3 for GTXO card?

I have a problem with zte-f660, the problem is that through the netnumen it is not configured onu, it is registered correctly but the commands are not accepted through the netnumen. Onu is configured only manually through the web browser, I have this version of onu and netnumen.

Do you have any idea how to solve this problem,because youtube dont work in any mag? Thanks!

Hi! i wanted to ask you if these signals are normal they make a lot of difference why? do you have any explanation of how so much the difference between tx and rx ?

I have ETTOK card vith version 1.2.5P3, but the mcast is freeze internet is ok only Mcast freeze why? The pon port is 10GB-Asymetric. i have patch: ettokv125p3t29_r0.pat ettokv125p3t29_r1.pat

HI? i have zte c320 version 2.1.0 but again processor is 99%. i have 500 client on a card gpon gtgh why? How to solve this problem?

I have ZTE-C320 with GTGHK version v2.1.0 i need firmware and patches v2.1.0 for GTGHK?

Do you have any idea how to change the cards SCXM to SCXN in ZTE-C300?

can you tell me which version of the netnumen open? because they have been told with a new version of the netnumen does not open. i have version: 12.13.20?

I have zte c320 with version 2.1.0 but the etgo card in netnumen does not support why? Rack Shelf Slot CfgType RealType Port HardVer SoftVer Status ------------------------------------------------------------------------------- 1 1 1 ETGO ETGOD 8 V1.0.0 V2.1.0 INSERVICE Slot1: ETGOD

I have a problem the main card is 95% because i be write it left in that for 1 day how can i eliminate this problem Rack Shelf Slot CPU(5s) CPU(1m) CPU(5m) PhyMem(MB) Memory ------------------------------------------------------------------------------- 1 1 4 9% 8% 8% 256 69% 1 1 5 64% 51% 43% 512 36% 1 1 8 17% 17% 16% 256 71% 1 1 10 94% 93% 93% 510 70% <------------------

can i send firmware v2.1.0 for ZTE-C300?

ZTE-Dubrave#show ru ZTE-Dubrave#show running-config Building configuration... !**********Before interface -- show run on RP start!********* ! ! sdisk disable set-pnp enable add-rack rackno 1 racktype IEC19 add-shelf rackno 1 shelfno 1 shelftype IEC_SHELF add-card rackno 1 shelfno 1 slotno 0 PRWG add-card rackno 1 shelfno 1 slotno 1 PRWG add-card rackno 1 shelfno 1 slotno 2 GTGO add-card rackno 1 shelfno 1 slotno 3 GTGO add-card rackno 1 shelfno 1 slotno 4 GTGH add-card rackno 1 shelfno 1 slotno 14 ETGO add-card rackno 1 shelfno 1 slotno 15 ETGO add-card rackno

All onu is disable and proccesor is 99% all onu is register but not online ZTE-Dubrave#show gpon on state gpon-olt_1/4/1 OnuIndex Admin State OMCC State O7 State Phase State ---------------------------------------------------------------------------- gpon-onu_1/4/1:1 enable disable unknown OffLine gpon-onu_1/4/1:2 enable disable unknown OffLine gpon-onu_1/4/1:3 enable disable unknown OffLine gpon-onu_1/4/1:4 enable disable unknown O

How to solve this can i help me? how to find loop ? can you write me skype?

i have Register 300 Clients in new GTGH Card but none are activated why processor is 99% when all Clients is ofline? Rack Shelf Slot CPU(5s) CPU(1m) CPU(5m) PhyMem(MB) Memory 1 1 4 98% 96% 63% 512 36%

Hi i have checked all the onu in the port to find loop detect and i solved all, but during the day everything is ok with proc 30-40% but from 8 am to 10 am at night again reaches the processor 100% loop detect does not have what the problem may be? Thanks,

can you send me a config for how to register ont gpon for internet and IPTV?

I have all patches disable for GTGO, but again the same processor 99% what do you think the solve problem?

what patch do you have? can I see them