NAS rscript на 10G мережевих

[a_n_h 589]

34 минуты назад, KaYot сказал:

Спрошу еще раз, а накуя бриджить вланы? Это такой ебнутый способ их терминировать не изучая как вообще работает маршрутизация и что такое VLAN, да?

подскажи как правильно сделать, что-бы на любой влан можно было назначить любую подсеть

[mgo 20]

22 минуты назад, skybetik сказав:

O0 ві єто серьезно ? 

Ну как минимум прерывания cpuset-ix-iflib  loader, sysctl  ну там буфера ) 

це круто але тестити на 1500 живих абонентах це все з гугла якось нехочеться

робочого тюнінгу на 10Г немаєте?

[mgo 20]

7 минут назад, a_n_h сказав:

подскажи как правильно сделать, что-бы на любой влан можно было назначить любую подсеть

аннамберед ціско 

 

На влан одну мережу по феншую буде

і буде маршурутизація між вланами, до цього треба стремится.

 

але будувалось все в перемішку і влом це все приводити до ума.

Відредаговано 2021-01-21 17:34:36 mgo

[skybetik 134]

12 минут назад, mgo сказав:

це круто але тестити на 1500 живих абонентах це все з гугла якось нехочеться

робочого тюнінгу на 10Г немаєте?

Его и не будет,каждый сам под задачи крутит. Буду у компа накидаю в пм.

[KaYot 3 708]

30 минут назад, a_n_h сказал:

подскажи как правильно сделать, что-бы на любой влан можно было назначить любую подсеть

Есть такая технология, ip unnumbered называется. В бсд можно реализовать костылями несложными.

[mgo 20]

1 минуту назад, KaYot сказав:

В бсд можно реализовать костылями несложными.

брідж і є одним із тих костилів

[KaYot 3 708]

11 минут назад, mgo сказал:

брідж і є одним із тих костилів

Нет.

Костыль это пара скриптов реализующих нужную технологию(для unnumbered - маршрут на ip прописывается на нужный vlan вместо прописывания ip на интерфейс). Технология при этом работает штатно, но для работы нужны костыли.

А бридж для терминации вланов это не костыль, это сумрачный гений рыгающих пони.

Відредаговано 2021-01-21 18:19:46 KaYot

[NETOS 129]

1 час назад, skybetik сказал:

Есть разные схемы ну и как минимум я боюсь все что больше 2 интерфейсов ) да и не хочу знать что в нем творится.

Вступать в полемику я не буду у каждого свой путь )

А расскажите как правильно организовать? Есть около 50 VLAN. На каждый порт OLT отдельный VLAN. Система FreeBSD 12.1, трафика почти 2Г, планируется переключение на 10Г.

 

[skybetik 134]

8 минут назад, NETOS сказав:

А расскажите как правильно организовать? Есть около 50 VLAN. На каждый порт OLT отдельный VLAN. Система FreeBSD 12.1, трафика почти 2Г, планируется переключение на 10Г.

 

Я же написал что в полемику не вступаю,каждый для себя выбирает способы (Правильно так как тебе удобно).

[NETOS 129]

13 часов назад, skybetik сказал:

Я же написал что в полемику не вступаю,каждый для себя выбирает способы (Правильно так как тебе удобно).

Так я попросил совета, как у вас сделано. Можете в личку написать. Сам стою перед решением запустить бридж. 

[GrDEV 44]

L3 свичь спасет мир....

[skybetik 134]

2 часа назад, NETOS сказав:

Так я попросил совета, как у вас сделано. Можете в личку написать. Сам стою перед решением запустить бридж. 

Правильней будет ip unnumbered, я выбрал bridge все го лишь из личніх соображений и удобств для себя.

 

[Pautiina 29]

Без dummynet. NAT.

 

Крутите тюнинг.

 

Такой-же сервер dummynet. NAT:

20 часов назад, KaYot сказал:

Есть такая технология, ip unnumbered называется. В бсд можно реализовать костылями несложными.

Никаких костылей. Все стандартными средствами. 

[KaYot 3 708]

49 минут назад, Pautiina сказал:

Никаких костылей. Все стандартными средствами. 

Полностью стандартными средствами маршрут на клиента не повесится, это и есть мелкие костыли.

[WideAreaNetwork 222]

22 часа назад, skybetik сказав:

Буду у компа накидаю в пм

и мне если не затруднит Вас

годину тому, Pautiina сказав:

Крутите тюнинг.

а какая ОС стоит?

[Pautiina 29]

2 часа назад, WideAreaNetwork сказал:

и мне если не затруднит Вас

а какая ОС стоит?

FreeBSD 12.2

2 часа назад, KaYot сказал:

Полностью стандартными средствами маршрут на клиента не повесится, это и есть мелкие костыли.

Да ладно. Хоть один костыль в студию.

ifconfig lo0 192.168.1.1/24 alias

route add 192.168.1.2/32 -iface vlan100

 

И где костыль?

В rc.conf прописал всё правильно и живи

 

 

Відредаговано 2021-01-22 18:03:36 Pautiina

[WideAreaNetwork 222]

30 минут назад, Pautiina сказав:

FreeBSD 12.2

могу попросить поделиться cpuset-ix-iflib  loader, sysctl и т.д., здесь или в личке

[a_n_h 589]

13 минут назад, WideAreaNetwork сказал:

могу попросить поделиться cpuset-ix-iflib  loader, sysctl и т.д., здесь или в личке

таких будет много, и мне тоже если не сюда то в личку...

[Pautiina 29]

32 минуты назад, WideAreaNetwork сказал:

могу попросить поделиться cpuset-ix-iflib  loader, sysctl и т.д., здесь или в личке

 

17 минут назад, a_n_h сказал:

таких будет много, и мне тоже если не сюда то в личку...

 

Выкладываю, все, что важно. Остальное пофиг.

 

Сервер без dummynet.

 

CPU: Intel(R) Xeon(R) E-2288G CPU @ 3.70GHz (3696.31-MHz K8-class CPU)

less /boot/loader.conf

ipmi_load="YES"

# BSDRP
hw.em.rx_process_limit="-1"
hw.igb.rx_process_limit="-1"
hw.ix.rx_process_limit="-1"

# Allow unsupported SFP
hw.ix.unsupported_sfp="1"
hw.ix.allow_unsupported_sfp="1"

# https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#TSO.2FLRO
hw.ix.flow_control=0

# H-TCP Congestion Control for a more aggressive increase in speed on higher
# latency, high bandwidth networks with some packet loss.
#cc_htcp_load="YES"

net.link.ifqmaxlen="16384"  # (default 50)

# qlimit for igmp, arp, ether and ip6 queues only (netstat -Q) (default 256)
net.isr.defaultqlimit="4096" # (default 256)

# increase the number of network mbufs the system is willing to allocate.  Each
# cluster represents approximately 2K of memory, so a value of 524288
# represents 1GB of kernel memory reserved for network buffers. (default
# 492680)
kern.ipc.nmbclusters="5242880"
kern.ipc.nmbjumbop="2621440"

# Size of the syncache hash table, must be a power of 2 (default 512)
net.inet.tcp.syncache.hashsize="1024"

# Limit the number of entries permitted in each bucket of the hash table. (default 30)
net.inet.tcp.syncache.bucketlimit="100"

# limit per-workstream queues (use "netstat -Q" if Qdrop is greater then 0
# increase this directive) (default 10240)
net.isr.maxqlimit="1000000"

less /etc/sysctl.conf

# $FreeBSD: stable/12/sbin/sysctl/sysctl.conf 337624 2018-08-11 13:28:03Z brd $
#
#  This file is read when going to multi-user and its contents piped thru
#  ``sysctl'' to adjust kernel values.  ``man 5 sysctl.conf'' for details.
#

# Uncomment this to prevent users from seeing information about processes that
# are being run under another UID.
#security.bsd.see_other_uids=0

# Tunning from INTERNET+UBILLING
net.inet.ip.intr_queue_maxlen=10240
# For ipfw dynamic rule
net.inet.ip.fw.dyn_max=65535
net.inet.ip.fw.dyn_buckets=2048
net.inet.ip.fw.dyn_syn_lifetime=10
net.inet.ip.fw.dyn_ack_lifetime=120


# FreeBSD 12.1 .:. /etc/sysctl.conf .:. version 0.66
# https://calomel.org/freebsd_network_tuning.html

# TCP Tuning: The throughput of connection is limited by two windows: the
# (Initial) Congestion Window and the TCP Receive Window (RWIN). The Congestion
# Window avoids exceeding the capacity of the network (RACK, CAIA, H-TCP or
# NewReno congestion control); and the Receive Window avoids exceeding the
# capacity of the receiver to process data (flow control). When our server is
# able to process packets as fast as they are received we want to allow the
# remote sending host to send data as fast as the network, Congestion Window,
# will allow. https://en.wikipedia.org/wiki/TCP_tuning

# IPC Socket Buffer: the maximum combined socket buffer size, in bytes, defined
# by SO_SNDBUF and SO_RCVBUF. kern.ipc.maxsockbuf is also used to define the
# window scaling factor (wscale in tcpdump) our server will advertise. The
# window scaling factor is defined as the maximum volume of data allowed in
# transit before the recieving server is required to send an ACK packet
# (acknowledgment) to the sending server. FreeBSD's default maxsockbuf value is
# two(2) megabytes which corresponds to a window scaling factor (wscale) of
# six(6) allowing the remote sender to transmit up to 2^6 x 65,535 bytes =
# 4,194,240 bytes (4MB) in flight, on the network before requiring an ACK
# packet from our server. In order to support the throughput of modern, long
# fat networks (LFN) with variable latency we suggest increasing the maximum
# socket buffer to at least 16MB if the system has enough RAM. "netstat -m"
# displays the amount of network buffers used. Increase kern.ipc.maxsockbuf if
# the counters for "mbufs denied" or "mbufs delayed" are greater than zero(0).
# https://en.wikipedia.org/wiki/TCP_window_scale_option
# https://en.wikipedia.org/wiki/Bandwidth-delay_product
#
# speed:   1 Gbit   maxsockbuf:   2MB   wscale:  6   in-flight:  2^6*65KB =    4MB (default)
# speed:   2 Gbit   maxsockbuf:   4MB   wscale:  7   in-flight:  2^7*65KB =    8MB
# speed:  10 Gbit   maxsockbuf:  16MB   wscale:  9   in-flight:  2^9*65KB =   32MB
# speed:  40 Gbit   maxsockbuf: 150MB   wscale: 12   in-flight: 2^12*65KB =  260MB
# speed: 100 Gbit   maxsockbuf: 600MB   wscale: 14   in-flight: 2^14*65KB = 1064MB
#
# !!!!!!!!!!!! внимение - неправльное значение может уложить сервер
#kern.ipc.maxsockbuf=2097152    # (wscale  6 ; default)
#kern.ipc.maxsockbuf=4194304    # (wscale  7)
kern.ipc.maxsockbuf=16777216    # (wscale  9)
#kern.ipc.maxsockbuf=157286400  # (wscale 12)
#kern.ipc.maxsockbuf=614400000  # (wscale 14)

# TCP Buffers: Larger buffers and TCP Large Window Extensions (RFC1323) can
# help alleviate the long fat network (LFN) problem caused by insufficient
# window size; limited to 65535 bytes without RFC 1323 scaling. Verify the
# window scaling extension is enabled with net.inet.tcp.rfc1323=1, which is
# default. Both the client and server must support RFC 1323 to take advantage
# of scalable buffers. A network connection at 100Mbit/sec with a latency of 10
# milliseconds has a bandwidth-delay product of 125 kilobytes
# ((100*10^6*10*10^-3)/8=125000) which is the same BDP of a 1Gbit LAN with
# one(1) millisecond latency ((1000*10^6*1*10^-3)/8=125000 bytes). As the
# latency and/or throughput increase so does the BDP. If the connection needs
# more buffer space the kernel will dynamically increase these network buffer
# values by net.inet.tcp.sendbuf_inc and net.inet.tcp.recvbuf_inc increments.
# Use "netstat -an" to watch Recv-Q and Send-Q as the kernel increases the
# network buffer up to net.inet.tcp.recvbuf_max and net.inet.tcp.sendbuf_max .
# https://en.wikipedia.org/wiki/Bandwidth-delay_product
#
net.inet.tcp.recvbuf_inc=65536    # (default 16384)
net.inet.tcp.recvbuf_max=4194304  # (default 2097152)
net.inet.tcp.recvspace=65536      # (default 65536)
net.inet.tcp.sendbuf_inc=65536    # (default 8192)
net.inet.tcp.sendbuf_max=4194304  # (default 2097152)
net.inet.tcp.sendspace=65536      # (default 32768)

# maximum segment size (MSS) specifies the largest payload of data in a single
# IPv4 TCP segment. RFC 6691 states the maximum segment size should equal the
# effective MTU minus the fixed IP and TCP headers, but before subtracting IP
# options like TCP timestamps. Path MTU Discovery (PMTUD) is not supported by
# all internet paths and can lead to increased connection setup latency so the
# MMS can be defined manually.
#
# Option 1 - Maximum Payload - To construct the maximum MMS, start with an
# ethernet frame size of 1514 bytes and subtract 14 bytes for the ethernet
# header for an interface MTU of 1500 bytes. Then subtract 20 bytes for the IP
# header and 20 bytes for the TCP header to equal an Maximum Segment Size (MSS)
# of tcp.mssdflt=1460 bytes. With net.inet.tcp.rfc1323 enabled the packet
# payload is reduced by a further 12 bytes and the MSS is reduced from
# tcp.mssdflt=1460 bytes to a packet payload of 1448 bytes total. An MMS of
# 1448 bytes has a 95.64% packet efficiency (1448/1514=0.9564).
#
# Option 2 - No Frags - Google states the HTTP/3 QUIC (Quick UDP Internet
# Connection) IPv4 datagram should be no larger than 1280 octets to attempt to
# avoid any packet fragmentation over any Internet path. To follow Google's
# no-fragment UDP policy for TCP packets set FreeBSD's MSS to 1240 bytes. To
# construct Google's no-fragment datagram start with an ethernet frame size of
# 1294 bytes and subtract 14 bytes for the ethernet header to equal Google's
# recommended PMTU size of 1280 bytes. Then subtract 20 bytes for the IP header
# and 20 bytes for the TCP header to equal tcp.mssdflt=1240 bytes. Then, before
# the packet is sent, FreeBSD will set the TCP timestamp (rfc1323) on the
# packet reducing the true packet payload (MSS) another 12 bytes from
# tcp.mssdflt=1240 bytes to 1228 bytes which has an 94.89% packet efficiency
# (1228/1294=0.9489). https://tools.ietf.org/html/draft-ietf-quic-transport-20
#
# Broken packets: IP fragmentation is flawed
# https://blog.cloudflare.com/ip-fragmentation-is-broken/
#
# FYI: PF with an outgoing scrub rule will re-package the packet using an MTU
# of 1460 by default, thus overriding the mssdflt setting wasting CPU time and
# adding latency.
#
net.inet.tcp.mssdflt=1460   # Option 1 (default 536)
#net.inet.tcp.mssdflt=1240  # Option 2 (default 536)

# minimum, maximum segment size (mMSS) specifies the smallest payload of data
# in a single IPv4 TCP segment our system will agree to send when negotiating
# with the client. RFC 6691 states that a minimum MTU size of 576 bytes must be
# supported and the MSS option should equal the effective MTU minus the fixed
# IP and TCP headers, but without subtracting IP or TCP options. To construct
# the minimum MSS start with a frame size of 590 bytes and subtract 14 bytes
# for the ethernet header to equal the RFC 6691 recomended MTU size of 576
# bytes. Continue by subtracting 20 bytes for the IP header and 20 bytes for
# the TCP header to equal tcp.minmss=536 bytes. Then, before the packet is
# sent, FreeBSD will set the TCP timestamp (rfc1323) on the packet reducing the
# true packet payload (MSS) another 12 bytes from tcp.minmss=536 bytes to 524
# bytes which is 90.9% packet efficiency (524/576=0.909). The default mMMS is
# only 84% efficient (216/256=0.84).
#
net.inet.tcp.minmss=536  # (default 216)

# TCP Slow start gradually increases the data send rate until the TCP
# congestion algorithm (CDG, H-TCP) calculates the networks maximum carrying
# capacity without dropping packets. TCP Congestion Control with Appropriate
# Byte Counting (ABC) allows our server to increase the maximum congestion
# window exponentially by the amount of data ACKed, but limits the maximum
# increment per ACK to (abc_l_var * maxseg) bytes. An abc_l_var of 44 times a
# maxseg of 1460 bytes would allow slow start to increase the congestion window
# by more than 64 kilobytes per step; 65535 bytes is the TCP receive buffer
# size of most hosts without TCP window scaling.
#
net.inet.tcp.abc_l_var=44   # (default 2) if net.inet.tcp.mssdflt = 1460
#net.inet.tcp.abc_l_var=52  # (default 2) if net.inet.tcp.mssdflt = 1240

# Initial Congestion Window (initcwnd) limits the amount of segments TCP can
# send onto the network before receiving an ACK from the other machine.
# Increasing the TCP Initial Congestion Window will reduce data transfer
# latency during the slow start phase of a TCP connection. The initial
# congestion window should be increased to speed up short, burst connections in
# order to send the most data in the shortest time frame without overloading
# any network buffers. Google's study reported sixteen(16) segments as showing
# the lowest latency initial congestion window. Also test 44 segments which is
# 65535 bytes, the TCP receive buffer size of most hosts without TCP window
# scaling.
# https://developers.google.com/speed/pagespeed/service/tcp_initcwnd_paper.pdf
#
net.inet.tcp.initcwnd_segments=44            # (default 10 for FreeBSD 11.2) if net.inet.tcp.mssdflt = 1460
#net.inet.tcp.initcwnd_segments=52           # (default 10 for FreeBSD 11.2) if net.inet.tcp.mssdflt = 1240

# RFC 6675 increases the accuracy of TCP Fast Recovery when combined with
# Selective Acknowledgement (net.inet.tcp.sack.enable=1). TCP loss recovery is
# enhanced by computing "pipe", a sender side estimation of the number of bytes
# still outstanding on the network. Fast Recovery is augmented by sending data
# on each ACK as necessary to prevent "pipe" from falling below the slow-start
# threshold (ssthresh). The TCP window size and SACK-based decisions are still
# determined by the congestion control algorithm; CDG, CUBIC or H-TCP if
# enabled, newreno by default.
#
net.inet.tcp.rfc6675_pipe=1  # (default 0)

# Reduce the amount of SYN/ACKs the server will re-transmit to an ip address
# whom did not respond to the first SYN/ACK. On a client's initial connection
# our server will always send a SYN/ACK in response to the client's initial
# SYN. Limiting retranstited SYN/ACKS reduces local syn cache size and a "SYN
# flood" DoS attack's collateral damage by not sending SYN/ACKs back to spoofed
# ips, multiple times. If we do continue to send SYN/ACKs to spoofed IPs they
# may send RST's back to us and an "amplification" attack would begin against
# our host. If you do not wish to send retransmits at all then set to zero(0)
# especially if you are under a SYN attack. If our first SYN/ACK gets dropped
# the client will re-send another SYN if they still want to connect. Also set
# "net.inet.tcp.msl" to two(2) times the average round trip time of a client,
# but no lower then 2000ms (2s). Test with "netstat -s -p tcp" and look under
# syncache entries. http://www.ouah.org/spank.txt
# https://people.freebsd.org/~jlemon/papers/syncache.pdf
#
net.inet.tcp.syncache.rexmtlimit=0  # (default 3)

# IP fragments require CPU processing time and system memory to reassemble. Due
# to multiple attacks vectors ip fragmentation can contribute to and that
# fragmentation can be used to evade packet inspection and auditing, we will
# not accept IPv4 or IPv6 fragments. Comment out these directives when
# supporting traffic which generates fragments by design; like NFS and certain
# preternatural functions of the Sony PS4 gaming console.
# https://en.wikipedia.org/wiki/IP_fragmentation_attack
# https://www.freebsd.org/security/advisories/FreeBSD-SA-18:10.ip.asc
#
net.inet.ip.maxfragpackets=0     # (default 63474)
net.inet.ip.maxfragsperpacket=0  # (default 16)

# Syncookies have advantages and disadvantages. Syncookies are useful if you
# are being DoS attacked as this method helps filter the proper clients from
# the attack machines. But, since the TCP options from the initial SYN are not
# saved in syncookies, the tcp options are not applied to the connection,
# precluding use of features like window scale, timestamps, or exact MSS
# sizing. As the returning ACK establishes the connection, it may be possible
# for an attacker to ACK flood a machine in an attempt to create a connection.
# Another benefit to overflowing to the point of getting a valid SYN cookie is
# the attacker can include data payload. Now that the attacker can send data to
# a FreeBSD network daemon, even using a spoofed source IP address, they can
# have FreeBSD do processing on the data which is not something the attacker
# could do without having SYN cookies. Even though syncookies are helpful
# during a DoS, we are going to disable syncookies at this time.
#
net.inet.tcp.syncookies=0  # (default 1)

# RFC 6528 Initial Sequence Numbers (ISN) refer to the unique 32-bit sequence
# number assigned to each new Transmission Control Protocol (TCP) connection.
# The TCP protocol assigns an ISN to each new byte, beginning with 0 and
# incrementally adding a secret number every four seconds until the limit is
# exhausted. In continuous communication all available ISN options could be
# used up in a few hours. Normally a new secret number is only chosen after the
# ISN limit has been exceeded. In order to defend against Sequence Number
# Attacks the ISN secret key should not be used sufficiently often that it
# would be regarded as predictable, and thus insecure. Reseeding the ISN will
# break TIME_WAIT recycling for a few minutes. BUT, for the more paranoid,
# simply choose a random number of seconds in which a new ISN secret should be
# generated.  https://tools.ietf.org/html/rfc6528
#
net.inet.tcp.isn_reseed_interval=4500  # (default 0, disabled)

# TCP segmentation offload (TSO), also called large segment offload (LSO),
# should be disabled on NAT firewalls and routers. TSO/LSO works by queuing up
# large 64KB buffers and letting the network interface card (NIC) split them
# into separate packets. The problem is the NIC can build a packet that is the
# wrong size and would be dropped by a switch or the receiving machine, like
# for NFS fragmented traffic. If the packet is dropped the overall sending
# bandwidth is reduced significantly. You can also disable TSO in /etc/rc.conf
# using the "-tso" directive after the network card configuration; for example,
# ifconfig_igb0="inet 10.10.10.1 netmask 255.255.255.0 -tso". Verify TSO is off
# on the hardware by making sure TSO4 and TSO6 are not seen in the "options="
# section using ifconfig.
# http://www.peerwisdom.org/2013/04/03/large-send-offload-and-network-performance/
#
net.inet.tcp.tso=0  # (default 1)

# Intel i350-T2 igb(4): flow control manages the rate of data transmission
# between two nodes preventing a fast sender from overwhelming a slow receiver.
# Ethernet "PAUSE" frames will pause transmission of all traffic types on a
# physical link, not just the individual flow causing the problem. By disabling
# physical link flow control the link instead relies on native TCP or QUIC UDP
# internal congestion control which is peer based on IP address and more fair
# to each flow. The options are: (0=No Flow Control) (1=Receive Pause)
# (2=Transmit Pause) (3=Full Flow Control, Default). A value of zero(0)
# disables ethernet flow control on the Intel igb(4) interface.
# http://virtualthreads.blogspot.com/2006/02/beware-ethernet-flow-control.html
#
dev.igb.0.fc=0  # (default 3)

# Intel i350-T2 igb(4): the rx_budget sets the maximum number of receive
# packets to process in an interrupt. If the budget is reached, the
# remaining/pending packets will be processed later in a scheduled taskqueue.
# The default of zero(0) indicates a FreeBSD 12 default of sixteen(16) frames
# can be accepted at a time which is less than 24 kilobytes. If the server is
# not CPU limited and also receiving an agglomeration of QUIC HTTP/3 UDP
# packets, we advise increasing the budget to a maximum of 65535 packets. "man
# iflib" for more information.
#
dev.igb.0.iflib.rx_budget=65535  # (default 0, which is 16 frames)
dev.igb.1.iflib.rx_budget=65535  # (default 0, which is 16 frames)

# Fortuna pseudorandom number generator (PRNG) maximum event size is also
# referred to as the minimum pool size. Fortuna has a main generator which
# supplies the OS with PRNG data. The Fortuna generator is seeded by 32
# separate 'Fortuna' accumulation pools which each have to be filled with at
# least 'minpoolsize' bytes before being able to seed the OS with random bits.
# On FreeBSD, the default 'minpoolsize' of 64 bytes is an estimate of the
# minimum amount of bytes a new pool should contain to provide at least 128
# bits of entropy. After a pool is used in a generator reseed, that pool is
# reset to an empty string and must reach 'minpoolsize' bytes again before
# being used as a seed. Increasing the 'minpoolsize' allows higher entropy into
# the accumulation pools before being assimilated by the generator.
#
# The Fortuna authors state 64 bytes is safe enough even if an attacker
# influences some random source data. To be a bit more paranoid, we increase
# the 'minpoolsize' to 128 bytes so each pool will provide an absolute minimum
# of 256 bits of entropy, but realistically closer to 1024 bits of entropy, for
# each of the 32 Fortuna accumulation pools. Values of 128 bytes and 256 bytes
# are reasonable when coupled with a dedicated hardware based PRNG like the
# fast source Intel Secure Key RNG (PURE_RDRAND). Do not make the pool value
# too large as this will delay the reseed even if very good random sources are
# available. https://www.schneier.com/academic/paperfiles/fortuna.pdf
#
# FYI: on FreeBSD 11, values over 64 can incur additional reboot time to
# populate the pools during the "Feeding entropy:" boot stage. For example, a
# pool size value of 256 can add an additional 90 seconds to boot the machine.
# FreeBSD 12 has been patched to not incur the boot delay issue with larger
# pool values.
#
kern.random.fortuna.minpoolsize=128  # (default 64)

# Entropy is the amount of order, disorder or chaos observed in a system which
# can be observed by FreeBSD and fed though Fortuna to the accumulation pools.
# Setting the harvest.mask to 67583 allows the OS to harvest entropy from any
# source including peripherals, network traffic, the universal memory allocator
# (UMA) and interrupts (SWI), but be warned, setting the harvest mask to 67583
# will limit network throughput to less than a gigabit even on modern hardware.
# When running a ten(10) gigabit network with more than four(4) real CPU cores
# and more than four(4) network card queues it is recommended to reduce the
# harvest mask to 65887 to ignore UMA. FS_ATIME, INTERRUPT and NET_ETHER
# entropy sources in order to achieve peak packets per second (PPS). By
# default, Fortuna will use a CPU's 'Intel Secure Key RNG' if available in
# hardware (PURE_RDRAND). Use "sysctl kern.random.harvest" to check the
# symbolic entropy sources being polled; disabled items are listed in square
# brackets. A harvest mask of 65887 is only around four(4%) more efficient than
# the default mask of 66047 at the maximum packets per second of the interface.
#
#kern.random.harvest.mask=351   # (default 511, FreeBSD 11 and 12 without Intel Secure Key RNG)
kern.random.harvest.mask=65887  # (default 66047, FreeBSD 12 with Intel Secure Key RNG)

# Increase the localhost buffer space as well as the maximum incoming and
# outgoing raw IP datagram size to 16384 bytes (2^14 bytes) which is the same
# as the MTU for the localhost interface, "ifconfig lo0". The larger buffer
# space should allow services which listen on localhost, like web or database
# servers, to more efficiently move data to the network buffers.
net.inet.raw.maxdgram=16384       # (default 9216)
net.inet.raw.recvspace=16384      # (default 9216)
net.local.stream.sendspace=16384  # (default 8192)
net.local.stream.recvspace=16384  # (default 8192)

# The TCPT_REXMT timer is used to force retransmissions. TCP has the
# TCPT_REXMT timer set whenever segments have been sent for which ACKs are
# expected, but not yet received. If an ACK is received which advances
# tp->snd_una, then the retransmit timer is cleared (if there are no more
# outstanding segments) or reset to the base value (if there are more ACKs
# expected). Whenever the retransmit timer goes off, we retransmit one
# unacknowledged segment, and do a backoff on the retransmit timer.
# net.inet.tcp.persmax=60000 # (default 60000)
# net.inet.tcp.persmin=5000  # (default 5000)

# Drop TCP options from 3rd and later retransmitted SYN
# net.inet.tcp.rexmit_drop_options=0  # (default 0)

# Enable tcp_drain routine for extra help when low on mbufs
# net.inet.tcp.do_tcpdrain=1 # (default 1)

# Myricom mxge(4): the maximum number of slices the driver will attempt to
# enable if enough system resources are available at boot. A slice is comprised
# of a set of receive queues and an associated interrupt thread. Multiple
# slices should be used when the network traffic is being limited by the
# processing speed of a single CPU core. When using multiple slices, the NIC
# hashes traffic to different slices based on the value of
# hw.mxge.rss_hashtype. Using multiple slices requires that your motherboard
# and Myri10GE NIC both be capable of MSI-X. The maximum number of slices
# is limited to the number of real CPU cores divided by the number of mxge
# network ports.
#hw.mxge.max_slices="1"  # (default 1, which uses a single cpu core)

# Myricom mxge(4): when multiple slices are enabled, the hash type determines
# how incoming traffic is steered to each slice. A slice is comprised of a set
# of receive queues and an associated interrupt thread. Hashing is disabled
# when using a single slice (hw.mxge.max_slices=1). The options are: ="1"
# hashes on the source and destination IPv4 addresses. ="2" hashes on the
# source and destination IPv4 addresses and also TCP source and destination
# ports. ="4" is the default and hashes on the TCP or UDP source ports. A value
# to "4" will more evenly distribute the flows over the slices. A value of "1"
# will lock client source ips to a single slice.
#hw.mxge.rss_hash_type="4"  # (default 4)

# Myricom mxge(4): flow control manages the rate of data transmission between
# two nodes preventing a fast sender from overwhelming a slow receiver.
# Ethernet "PAUSE" frames pause transmission of all traffic on a physical link,
# not just the individual flow causing the problem. By disabling physical link
# flow control the link instead relies on TCP's internal flow control which is
# peer based on IP address and more fair to each flow. The mxge options are:
# (0=No Flow Control) (1=Full Flow Control, Default). A value of zero(0)
# disables ethernet flow control on the Myricom mxge(4) interface.
# http://virtualthreads.blogspot.com/2006/02/beware-ethernet-flow-control.html
#hw.mxge.flow_control_enabled=0  # (default 1, enabled)

# The number of frames the NIC's receive (rx) queue will accept before
# triggering a kernel inturrupt. If the NIC's queue is full and the kernel can
# not process the packets fast enough then the packets are dropped. Use "sysctl
# net.inet.ip.intr_queue_drops" and "netstat -Q" and increase the queue_maxlen
# if queue_drops is greater then zero(0). The real problem is the CPU or NIC is
# not fast enough to handle the traffic, but if you are already at the limit of
# your network then increasing these values will help.
#net.inet.ip.intr_queue_maxlen=2048  # (default 256)
net.route.netisr_maxqlen=2048       # (default 256)

# Intel igb(4): freebsd limits the the number of received packets a network
# card can process to 100 packets per interrupt cycle. This limit is in place
# because of inefficiencies in IRQ sharing when the network card is using the
# same IRQ as another device. When the Intel network card is assigned a unique
# IRQ (dmesg) and MSI-X is enabled through the driver (hw.igb.enable_msix=1)
# then interrupt scheduling is significantly more efficient and the NIC can be
# allowed to process packets as fast as they are received. A value of "-1"
# means unlimited packet processing. There is no need to set these options if
# hw.igb.rx_process_limit is already defined.
#dev.igb.0.rx_processing_limit=-1  # (default 100)
#dev.igb.1.rx_processing_limit=-1  # (default 100)

# Intel igb(4): Energy-Efficient Ethernet (EEE) is intended to reduce system
# power consumption up to 80% by setting the interface to a low power mode
# during periods of network inactivity. When the NIC is in low power mode this
# allows the CPU longer periods of time to also go into a sleep state thus
# lowering overall power usage. The problem is EEE can cause periodic packet
# loss and latency spikes when the interface transitions from low power mode.
# Packet loss from EEE will not show up in the missed_packets or dropped
# counter because the packet was not dropped, but lost by the network card
# during the transition phase. The Intel i350-T2 only requires 4.4 watts with
# both network ports active so we recommend disabling EEE especially on a
# server unless power usage is of higher priority. Verify DMA Coalesce is
# disabled (dev.igb.0.dmac=0) which is the default. WARNING: enabling EEE will
# significantly delay DHCP leases and the network interface will flip a few
# times on boot. https://en.wikipedia.org/wiki/Energy-Efficient_Ethernet
#dev.igb.0.eee_disabled=1  # (default 0, enabled)
#dev.igb.1.eee_disabled=1  # (default 0, enabled)

# Current CPU can manage a lot's more of interrupts than default (1000)
# The 9000 value was found in /usr/src/sys/dev/ixgbe/README
hw.intr_storm_threshold=9000

#Power save: Disable power for device with no driver loaded
hw.pci.do_power_nodriver=3
# ICMP reply from incoming interface for non-local packets
net.inet.icmp.reply_from_interface=1

# General Security and DoS mitigation
net.bpf.optimize_writers=1           # bpf are write-only unless program explicitly specifies the read filter (default 0)
#net.bpf.zerocopy_enable=0            # zero-copy BPF buffers, breaks dhcpd ! (default 0)
net.inet.ip.check_interface=1         # verify packet arrives on correct interface (default 0)
#net.inet.ip.portrange.randomized=1   # randomize outgoing upper ports (default 1)
net.inet.ip.process_options=0         # ignore IP options in the incoming packets (default 1)
net.inet.ip.random_id=1               # assign a random IP_ID to each packet leaving the system (default 0)
net.inet.ip.redirect=0                # do not send IP redirects (default 1)
#net.inet.ip.accept_sourceroute=0     # drop source routed packets since they can not be trusted (default 0)
#net.inet.ip.sourceroute=0            # if source routed packets are accepted the route data is ignored (default 0)
#net.inet.ip.stealth=1                # do not reduce the TTL by one(1) when a packets goes through the firewall (default 0)
#net.inet.icmp.bmcastecho=0           # do not respond to ICMP packets sent to IP broadcast addresses (default 0)
#net.inet.icmp.maskfake=0             # do not fake reply to ICMP Address Mask Request packets (default 0)
#net.inet.icmp.maskrepl=0             # replies are not sent for ICMP address mask requests (default 0)
#net.inet.icmp.log_redirect=0         # do not log redirected ICMP packet attempts (default 0)
net.inet.icmp.drop_redirect=1         # no redirected ICMP packets (default 0)
#net.inet.icmp.icmplim=200            # number of ICMP/TCP RST packets/sec, increase for bittorrent or many clients. (default 200)
#net.inet.icmp.icmplim_output=1       # show "Limiting open port RST response" messages (default 1)
#net.inet.tcp.abc_l_var=2             # increment the slow-start Congestion Window (cwnd) after two(2) segments (default 2)
net.inet.tcp.always_keepalive=0       # disable tcp keep alive detection for dead peers, keepalive can be spoofed (default 1)
net.inet.tcp.drop_synfin=1            # SYN/FIN packets get dropped on initial connection (default 0)
net.inet.tcp.ecn.enable=1             # explicit congestion notification (ecn) warning: some ISP routers may abuse ECN (default 0)
net.inet.tcp.fast_finwait2_recycle=1  # recycle FIN/WAIT states quickly (helps against DoS, but may cause false RST) (default 0)
net.inet.tcp.icmp_may_rst=0           # icmp may not send RST to avoid spoofed icmp/udp floods (default 1)
#net.inet.tcp.maxtcptw=50000          # max number of tcp time_wait states for closing connections (default ~27767)
net.inet.tcp.msl=5000                 # Maximum Segment Lifetime is the time a TCP segment can exist on the network and is
                                      # used to determine the TIME_WAIT interval, 2*MSL (default 30000 which is 60 seconds)
net.inet.tcp.path_mtu_discovery=0     # disable MTU discovery since many hosts drop ICMP type 3 packets (default 1)
#net.inet.tcp.rfc3042=1               # on packet loss trigger the fast retransmit algorithm instead of tcp timeout (default 1)
net.inet.udp.blackhole=1              # drop udp packets destined for closed sockets (default 0)
net.inet.tcp.blackhole=2              # drop tcp packets destined for closed ports (default 0)

cat /etc/rc.conf | grep -e ifconfig_ix[0-1]

ifconfig_ix0="up -rxcsum -txcsum -tso4 -tso6 -lro -vlanhwtso -vlanhwtag -vlanhwfilter description -=INTERFACE-TO-CORE-SWITCH=-"
ifconfig_ix1="up -rxcsum -txcsum -tso4 -tso6 -lro -vlanhwtso -vlanhwtag -vlanhwfilter description -=CORE-SWITCH=-"

ipfw show

00100       7914802        880058842 allow ip from any to any via lo0
00200             0                0 deny ip from any to 127.0.0.0/8
00300             0                0 deny ip from 127.0.0.0/8 to any
01100             0                0 deny ip from not me to 10.0.50.0/24 out xmit vlan300
01101             0                0 deny ip from 10.0.50.0/24 to not me in recv vlan300
01300        796298         41238560 deny tcp from not me to any 25 out xmit vlan998
02010             0                0 allow udp from 0.0.0.0 20561 to 255.255.255.255 in recv table(USERS_VLAN)
02040    3763624719     300665541296 allow ip from any to { table(ALLOW_IP) or me } in recv table(USERS_VLAN)
02041    5234871982     638932581223 allow ip from { table(ALLOW_IP) or me } to any out xmit table(USERS_VLAN)
04000    1999003789     838624501100 skipto 30100 tcp from table(USERS_NAT) to table(PAYSYSTEMS) 80,443 in recv table(USERS_VLAN)
04001    2208731646    1553147142002 skipto 30200 tcp from table(PAYSYSTEMS) 80,443 to table(USERS_NAT) out xmit table(USERS_VLAN)
05000      31815632       4431518180 fwd 10.31.31.101 tcp from 172.31.0.0/16 to not table(ALLOW_IP) 80 in recv table(USERS_VLAN)
05010      25988580      19352798938 allow tcp from not me 80 to 172.31.0.0/16 out xmit table(USERS_VLAN)
06000     711416818      51200880709 deny ip from { table(0) or not table(50) } to not me in recv table(USERS_VLAN)
06010     125985439       6429835698 deny ip from not me to { table(0) or not table(51) } out xmit table(USERS_VLAN)
30100  633012123638  168286861539984 nat tablearg ip from table(USERS_NAT) to not table(ALLOW_IP) out xmit vlan998
30200 1530752004794 2013678396459354 nat tablearg ip from not table(ALLOW_IP) to table(REALIP_NAT) in recv vlan998
65535 3579337678544 3536650872365449 allow ip from any to any

 

Для сервера с dummynet отличающиеся файлы:

 

less /boot/loader.conf

dev.ix.0.iflib.core_offset=1
dev.ix.1.iflib.core_offset=1

dev.ix.0.iflib.override_nrxqs=7
dev.ix.0.iflib.override_ntxqs=7

dev.ix.1.iflib.override_nrxqs=7
dev.ix.1.iflib.override_ntxqs=7

# BSDRP
hw.em.rx_process_limit="-1"
hw.igb.rx_process_limit="-1"
hw.ix.rx_process_limit="-1"

# Allow unsupported SFP
hw.ix.unsupported_sfp="1"
hw.ix.allow_unsupported_sfp="1"

# https://doc.pfsense.org/index.php/Tuning_and_Troubleshooting_Network_Cards#TSO.2FLRO
hw.ix.flow_control=0

# H-TCP Congestion Control for a more aggressive increase in speed on higher
# latency, high bandwidth networks with some packet loss.
#cc_htcp_load="YES"

net.link.ifqmaxlen="16384"  # (default 50)

# qlimit for igmp, arp, ether and ip6 queues only (netstat -Q) (default 256)
net.isr.defaultqlimit="4096" # (default 256)

# increase the number of network mbufs the system is willing to allocate.  Each
# cluster represents approximately 2K of memory, so a value of 524288
# represents 1GB of kernel memory reserved for network buffers. (default
# 492680)
kern.ipc.nmbclusters="5242880"
kern.ipc.nmbjumbop="2621440"


# Size of the syncache hash table, must be a power of 2 (default 512)
net.inet.tcp.syncache.hashsize="1024"

# Limit the number of entries permitted in each bucket of the hash table. (default 30)
net.inet.tcp.syncache.bucketlimit="100"

# limit per-workstream queues (use "netstat -Q" if Qdrop is greater then 0
# increase this directive) (default 10240)
net.isr.maxqlimit="1000000"

less /usr/local/etc/rc.d/cpuset-dummynet
#!/bin/sh
# PROVIDE: cpuset-dummynet
# REQUIRE: FILESYSTEMS
# BEFORE:  netif
# KEYWORD: nojail
/usr/bin/cpuset -l 0 -t $(procstat -t 0 | /usr/bin/awk '/dummynet/ {print $2}')

ipfw show

00100      7301952       799721278 allow ip from any to any via lo0
00200            0               0 deny ip from any to 127.0.0.0/8
00300            0               0 deny ip from 127.0.0.0/8 to any
01300       619087        36412252 deny tcp from not me to any 25 out xmit vlan998
01310         3249          271174 deny ip from table(DENY_IP) to any in recv vlan998
01311     22474455      1348485560 deny ip from any to table(DENY_IP) out xmit vlan998
02010            0               0 allow udp from 0.0.0.0 20561 to 255.255.255.255 in recv table(USERS_VLAN)
02040   1604609344    143551782453 allow ip from any to { table(ALLOW_IP) or me } in recv table(USERS_VLAN)
02041   1816999815    197994921810 allow ip from { table(ALLOW_IP) or me } to any out xmit table(USERS_VLAN)
04000    904889973    372143814795 skipto 30100 tcp from table(USERS_NAT) to table(PAYSYSTEMS) 80,443 in recv table(USERS_VLAN)
04001    983011289    714341053758 skipto 30200 tcp from table(PAYSYSTEMS) 80,443 to table(USERS_NAT) out xmit table(USERS_VLAN)
05000        74345         9366675 fwd 10.31.31.101,26513 tcp from 172.31.0.0/16 to not table(ALLOW_IP) 80 in recv table(USERS_VLAN)
05010        71843        42225547 allow tcp from not me 80 to 172.31.0.0/16 out xmit table(USERS_VLAN)
06000    334080578     27129339965 deny ip from { table(0) or not table(50) } to not me in recv table(USERS_VLAN)
06010    221351653     15300095622 deny ip from not me to { table(0) or not table(51) } out xmit table(USERS_VLAN)
30000 257411270192  51167909907089 pipe tablearg ip from table(50) to any in recv vlan*
30004 522369117361 672065962540723 pipe tablearg ip from any to table(51) out xmit vlan*
30100 245366462925  39179861277335 nat tablearg ip from table(USERS_NAT) to not table(ALLOW_IP) out xmit vlan998
30200 513354241457 665870772340077 nat tablearg ip from not table(ALLOW_IP) to table(REALIP_NAT) in recv vlan998
65535  83965478411  60289214411412 allow ip from any to any

 

[mgo 20]

Проблема  -  рандомний абонент десь раз у тиждень перестає пінгатися з сервера 10G

Абонент каже то є то нема інтету по настрою, або повністю тухне, як кому повезе.

В момент  коли інет у абонента не працює

arping працює.

Пробував ресет роутера, ресет в білінгу, заміну ОНУ, arp -d IP_абонента - не помагає.

Шейпер є адекватно призначений.

Що ще можна глянути?

 

Переводжу абонента на інший NAS,  там все ок.

 

NAS rscript на freeBSD 12.1

10G мережева,  тюнінг від Pautiina, вілани у бріджі.

~ 1000 абонентів і 1,6G жує трафіку, у піку ще гіг дає, більше не пробував.

 

[Pautiina 29]

4 часа назад, mgo сказал:

Проблема  -  рандомний абонент десь раз у тиждень перестає пінгатися з сервера 10G

Абонент каже то є то нема інтету по настрою, або повністю тухне, як кому повезе.

В момент  коли інет у абонента не працює

arping працює.

Пробував ресет роутера, ресет в білінгу, заміну ОНУ, arp -d IP_абонента - не помагає.

Шейпер є адекватно призначений.

Що ще можна глянути?

 

Переводжу абонента на інший NAS,  там все ок.

 

NAS rscript на freeBSD 12.1

10G мережева,  тюнінг від Pautiina, вілани у бріджі.

~ 1000 абонентів і 1,6G жує трафіку, у піку ще гіг дає, більше не пробував.

 

Вот я в бриджы не загоняю. Попробуйте сначала удалить блокирующие правила фаервола

[skybetik 134]

19 часов назад, Pautiina сказав:

Вот я в бриджы не загоняю. Попробуйте сначала удалить блокирующие правила фаервола

Не думаю что тут бриджы виновны.

[Daniil_ 10]

для какой версии freebsd ?

Відредаговано 2021-05-14 09:41:22 Daniil_

[revomix 28]

В 18.03.2021 в 20:15, mgo сказав:

Проблема  -  рандомний абонент десь раз у тиждень перестає пінгатися з сервера 10G

Абонент каже то є то нема інтету по настрою, або повністю тухне, як кому повезе.

В момент  коли інет у абонента не працює

arping працює.

Пробував ресет роутера, ресет в білінгу, заміну ОНУ, arp -d IP_абонента - не помагає.

Шейпер є адекватно призначений.

Що ще можна глянути?

 

Переводжу абонента на інший NAS,  там все ок.

 

NAS rscript на freeBSD 12.1

10G мережева,  тюнінг від Pautiina, вілани у бріджі.

~ 1000 абонентів і 1,6G жує трафіку, у піку ще гіг дає, більше не пробував.

 

бувало що rscript по кругу молотив, включав-виключав абонів, подивіться в 47 табличку коли пропадає у абона

[a_n_h 589]

Подыму тему, объясните, что в этом:

В 22.01.2021 в 21:13, Pautiina сказал:

ifconfig_ix0="up -rxcsum -txcsum -tso4 -tso6 -lro -vlanhwtso -vlanhwtag -vlanhwfilter description -=INTERFACE-TO-CORE-SWITCH=-"

ifconfig_ix1="up -rxcsum -txcsum -tso4 -tso6 -lro -vlanhwtso -vlanhwtag -vlanhwfilter description -=CORE-SWITCH=-"

"делают" записи:

-=INTERFACE-TO-CORE-SWITCH=-

-=CORE-SWITCH=-