ankos 19 Опубликовано: 2008-07-15 11:11:37 Share Опубликовано: 2008-07-15 11:11:37 Всем привет! Поставил такую зборку Stg-2.405.9.8+VPN+freeradius 1. СТГ поднимается, а таже все модули в т.ч. freeradius; 2. Freeradius-1.1.7 также поднялся; 3. VPN тоже работает, еcли неиспользовать radius.so. При подключении VPN сообщает о ошибке 691: такого имени и пароля незарегестрировано, что то в этом роде. Подскажите куда копать? Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-15 13:10:21 Share Опубліковано: 2008-07-15 13:10:21 В логи! Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-15 14:22:02 Автор Share Опубліковано: 2008-07-15 14:22:02 В логи! Смотрю, но они мне ничего неговорят! - тоисть туплю! Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-15 14:24:11 Share Опубліковано: 2008-07-15 14:24:11 ... /var/log/messages ... radiusd -X ... ./build debug ... Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-15 15:33:37 Автор Share Опубліковано: 2008-07-15 15:33:37 syslog Jul 15 17:53:12 ns pptpd[18619]: GRE: Bad checksum from pppd. Jul 15 17:53:15 ns pptpd[18619]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jul 15 17:53:15 ns pppd[18620]: /etc/radiusclient/radiusclient.conf: line 86: unrecognized keyword: bindaddr Jul 15 17:53:15 ns pppd[18620]: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf Jul 15 17:53:15 ns pppd[18620]: Peer ankos failed CHAP authentication Jul 15 17:55:51 ns pptpd[18663]: GRE: Bad checksum from pppd. Jul 15 17:55:54 ns pptpd[18663]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jul 15 17:55:54 ns pppd[18664]: /etc/radiusclient/radiusclient.conf: line 83: unrecognized keyword: radius_deadtime Jul 15 17:55:54 ns pppd[18664]: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf Jul 15 17:55:54 ns pppd[18664]: Peer ankos failed CHAP authentication Jul 15 18:01:08 ns pptpd[18764]: MGR: connections limit (100) reached, extra IP addresses ignored Jul 15 18:01:14 ns pptpd[18766]: GRE: Bad checksum from pppd. Jul 15 18:01:17 ns pptpd[18766]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jul 15 18:01:17 ns pppd[18767]: /etc/radiusclient/radiusclient.conf: line 83: unrecognized keyword: radius_deadtime Jul 15 18:01:17 ns pppd[18767]: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf Jul 15 18:01:17 ns pppd[18767]: Peer ankos failed CHAP authentication messages Jul 15 18:01:08 ns /usr/sbin/gpm[3607]: *** info [client.c(275)]: Jul 15 18:01:08 ns /usr/sbin/gpm[3607]: Request on 6 (console 0) Jul 15 18:01:08 ns /usr/sbin/gpm[3607]: *** info [client.c(284)]: Jul 15 18:01:08 ns /usr/sbin/gpm[3607]: Closing Jul 15 18:01:08 ns pptpd[18765]: MGR: Manager process started Jul 15 18:01:08 ns pptpd[18765]: MGR: Maximum of 100 connections available Jul 15 18:01:09 ns /usr/sbin/gpm[3607]: *** info [client.c(137)]: Jul 15 18:01:09 ns /usr/sbin/gpm[3607]: Connecting at fd 6 Jul 15 18:01:10 ns /usr/sbin/gpm[3607]: *** info [client.c(275)]: Jul 15 18:01:10 ns /usr/sbin/gpm[3607]: Request on 6 (console 0) Jul 15 18:01:10 ns /usr/sbin/gpm[3607]: *** info [client.c(284)]: Jul 15 18:01:10 ns /usr/sbin/gpm[3607]: Closing Jul 15 18:01:11 ns /usr/sbin/gpm[3607]: *** info [client.c(137)]: Jul 15 18:01:11 ns /usr/sbin/gpm[3607]: Connecting at fd 6 Jul 15 18:01:14 ns pptpd[18766]: CTRL: Client 10.1.200.112 control connection started Jul 15 18:01:14 ns pptpd[18766]: CTRL: Starting call (launching pppd, opening GRE) Jul 15 18:01:14 ns pppd[18767]: Plugin radius.so loaded. Jul 15 18:01:14 ns pppd[18767]: RADIUS plugin initialized. Jul 15 18:01:14 ns pppd[18767]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Jul 15 18:01:14 ns pppd[18767]: pptpd-logwtmp: $Version$ Jul 15 18:01:14 ns pppd[18767]: pppd 2.4.4 started by root, uid 0 Jul 15 18:01:14 ns pppd[18767]: Using interface ppp0 Jul 15 18:01:14 ns pppd[18767]: Connect: ppp0 <--> /dev/pts/3 Jul 15 18:01:17 ns pppd[18767]: Connection terminated. Jul 15 18:01:17 ns pppd[18767]: Exit. Jul 15 18:01:17 ns pptpd[18766]: CTRL: Client 10.1.200.112 control connection finished debug pptp Jul 15 18:01:14 ns pppd[18767]: using channel 105Jul 15 18:01:14 ns pppd[18767]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x367b494> <pcomp> <accomp>] Jul 15 18:01:14 ns pppd[18767]: rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0x51096018> <pcomp> <accomp> <callback CBCP>] Jul 15 18:01:14 ns pppd[18767]: sent [LCP ConfRej id=0x0 <callback CBCP>] Jul 15 18:01:14 ns pppd[18767]: rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0x51096018> <pcomp> <accomp>] Jul 15 18:01:14 ns pppd[18767]: sent [LCP ConfAck id=0x1 <mru 1400> <magic 0x51096018> <pcomp> <accomp>] Jul 15 18:01:17 ns pppd[18767]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x367b494> <pcomp> <accomp>] Jul 15 18:01:17 ns pppd[18767]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x367b494> <pcomp> <accomp>] Jul 15 18:01:17 ns pppd[18767]: sent [CHAP Challenge id=0xb8 <97e3a63a4f0e6b3df93709bee0e6abb2>, name = "pptpd"] Jul 15 18:01:17 ns pppd[18767]: rcvd [LCP Ident id=0x2 magic=0x51096018 "MSRASV5.10"] Jul 15 18:01:17 ns pppd[18767]: rcvd [LCP Ident id=0x3 magic=0x51096018 "MSRAS-0-TOLYAN"] Jul 15 18:01:17 ns pppd[18767]: rcvd [CHAP Response id=0xb8 <97d6614b27941d86d78aaa22210ce83000000000000000001b19988907a01bf89ff482b7f0c906c8778f47f8363501c700>, name = "ankos"] Jul 15 18:01:17 ns pppd[18767]: sent [CHAP Failure id=0xb8 ""] Jul 15 18:01:17 ns pppd[18767]: sent [LCP TermReq id=0x2 "Authentication failed"] Jul 15 18:01:17 ns pppd[18767]: rcvd [LCP TermAck id=0x2 "Authentication failed"] Jul 15 18:01:17 ns pptpd[18766]: CTRL: Reaping child PPP[18767 Логи! вижу что чтото нето, но что непонимаю! Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-16 06:47:50 Share Опубліковано: 2008-07-16 06:47:50 radiusd -X и лог Stargazer PS: Jul 15 18:01:17 ns pppd[18767]: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-16 06:53:38 Автор Share Опубліковано: 2008-07-16 06:53:38 (відредаговано) radiusd -X root@ns:/usr/sbin# ./radiusd -XStarting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /usr/etc/raddb/proxy.conf Config: including file: /usr/etc/raddb/clients.conf Config: including file: /usr/etc/raddb/snmp.conf Config: including file: /usr/etc/raddb/eap.conf main: prefix = "/usr" main: localstatedir = "/usr/var" main: logdir = "/usr/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/usr/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/var/log/radius/radius.log" main: log_auth = yes main: log_auth_badpass = yes main: log_auth_goodpass = no main: pidfile = "/usr/var/run/radiusd/radius.pid" main: user = "root" main: group = "root" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib rlm_stg: stg_init() Module: Loaded stg rlm_stg: stg_instantiate() stg: password = "123456" stg: server = "127.0.0.1" stg: port = 6666 stg: local_port = 6667 Module: Instantiated stg (stg) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = no Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/etc/raddb/huntgroups" preprocess: hints = "/usr/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Addre ss, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/var/log/radius/radacct/%{Client-IP-Address}/detail-% Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. STG log 2008-07-15 08:18:32 -- Stg v. Stg 2.4042008-07-15 08:18:32 -- Message queue created successfully. msgKey=5555 msgID=0 2008-07-15 08:18:32 -- Timer thread started successfully. 2008-07-15 08:18:32 -- Storage plugin: mysql_store v.0.67-mutex (STG-Web). Loading successfull. 2008-07-15 08:18:32 -- Users started successfully. 2008-07-15 08:18:32 -- Traffcounter started successfully. 2008-07-15 08:18:32 -- Module: 'ipq_cap v.1.1'. Start successfull. 0 2008-07-15 08:18:32 -- Module: 'Ether_cap v.1.0'. Start successfull. 10 2008-07-15 08:18:32 -- Module: 'RADIUS data access plugin v 0.5'. Start successfull. 20 2008-07-15 08:18:32 -- Module: 'InetAccess authorizator v.1.2'. Start successfull. 50 2008-07-15 08:18:32 -- Module: 'Always Online authorizator v.1.0'. Start successfull. 70 2008-07-15 08:18:32 -- Module: 'Pinger v.1.01'. Start successfull. 100 2008-07-15 08:18:32 -- Module: 'Stg configurator v.0.07'. Start successfull. 220 2008-07-15 08:18:32 -- Stg started successfully. 2008-07-15 08:18:32 -- +++++++++++++++++++++++++++++++++++++++++++++ Відредаговано 2008-07-16 07:01:01 ankos Ссылка на сообщение Поделиться на других сайтах
-HS- 0 Опубліковано: 2008-07-16 22:20:39 Share Опубліковано: 2008-07-16 22:20:39 У тебя есть конфиг /etc/radiusclient/radiusclient.conf ? От той ли он версии радиуса, проверь его содержимое на правильность. Судя по логу создается впечатление, что перепутаны конфиги radiusd.conf и radiusclient.conf. Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-17 14:16:49 Автор Share Опубліковано: 2008-07-17 14:16:49 (відредаговано) Есть у меня и radiusd.conf в /raddb и radiusclient.conf только в /usr/etc/radiusclient а на /etc/radiusclient я на всякий случай сделал симлинк Мои конфигкрации radiusd.conf prefix = /usrexec_prefix = ${prefix} sysconfdir = ${prefix}/etc localstatedir = ${prefix}/var sbindir = ${exec_prefix}/sbin logdir = ${localstatedir}/log/radius raddbdir = ${sysconfdir}/raddb radacctdir = ${logdir}/radacct confdir = ${raddbdir} run_dir = ${localstatedir}/run/radiusd log_file = ${logdir}/radius.log libdir = ${exec_prefix}/lib pidfile = ${run_dir}/radius.pid user = root group = root max_request_time = 30 delete_blocked_requests = no cleanup_delay = 5 max_requests = 1024 bind_address = * port = 0 hostname_lookups = no allow_core_dumps = no regular_expressions = yes extended_expressions = yes log_stripped_names = no log_auth = yes log_auth_badpass = yes log_auth_goodpass = no usercollide = no lower_user = no lower_pass = no nospace_user = no nospace_pass = no checkrad = ${sbindir}/checkrad security { max_attributes = 200 reject_delay = 1 status_server = no } proxy_requests = yes $INCLUDE ${confdir}/proxy.conf $INCLUDE ${confdir}/clients.conf snmp = no $INCLUDE ${confdir}/snmp.conf thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 } modules { pap { encryption_scheme = crypt } chap { authtype = CHAP } $INCLUDE ${confdir}/eap.conf mschap { use_mppe = yes authtype = MS-CHAP --username=%{Stripped-User-Name:-%{User-Name:-None}} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}" } preprocess { huntgroups = ${confdir}/huntgroups hints = ${confdir}/hints with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no } detail { detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d detailperm = 0600 } acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" } radutmp { filename = ${logdir}/radutmp username = %{User-Name} case_sensitive = yes check_with_nas = yes perm = 0600 callerid = "yes" } radutmp sradutmp { filename = ${logdir}/sradutmp perm = 0644 callerid = "no" } attr_filter { attrsfile = ${confdir}/attrs } counter daily { filename = ${raddbdir}/db.daily key = User-Name count-attribute = Acct-Session-Time reset = daily counter-name = Daily-Session-Time check-name = Max-Daily-Session allowed-servicetype = Framed-User cache-size = 5000 } always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } stg { local_port = 6667 server = 127.0.0.1 port = 6666 password = 123456 } } instantiate { stg } authorize { preprocess chap mschap eap stg } authenticate { Auth-Type PAP { stg pap } Auth-Type CHAP { stg chap } Auth-Type MS-CHAP { stg mschap } eap } preacct { preprocess acct_unique } accounting { detail # daily radutmp stg } session { radutmp } post-auth { stg } pre-proxy { } post-proxy { eap } radiusclient.conf auth_order radius,locallogin_tries 4 login_timeout 60 nologin /etc/nologin issue /usr/etc/radiusclient/issue authserver localhost acctserver localhost servers /usr/etc/radiusclient/servers dictionary /usr/etc/radiusclient/dictionary login_radius /usr/sbin/login.radius seqfile /var/run/radius.seq mapfile /usr/etc/radiusclient/port-id-map default_realm radius_timeout 10 radius_retries 3 radius_deadtime 0 bindaddr * login_local /bin/login Відредаговано 2008-07-17 14:40:59 ankos Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-17 14:59:21 Share Опубліковано: 2008-07-17 14:59:21 Не вижу в логах коннектов к радиусу. К стати, на радиусклиент он у тебя ругался: Jul 15 18:01:17 ns pppd[18767]: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-17 15:33:17 Автор Share Опубліковано: 2008-07-17 15:33:17 Не вижу в логах коннектов к радиусу.К стати, на радиусклиент он у тебя ругался: Jul 15 18:01:17 ns pppd[18767]: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf он вначале ругается на Jul 15 17:55:54 ns pppd[18664]: /etc/radiusclient/radiusclient.conf: line 83: unrecognized keyword: radius_deadtime потом на Jul 15 17:55:54 ns pppd[18664]: RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-19 14:06:10 Share Опубліковано: 2008-07-19 14:06:10 1 - неверный параметр в конфиге. 2 - вобще не может файл прочитать. По причине его отсутствия, недостаточных прав или неправильного формата. Конечно, откдуда там коннекты будут... Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-19 16:32:00 Автор Share Опубліковано: 2008-07-19 16:32:00 Когда закоментил параметр radius_deadtime и bindaddr * он перестал материться на RADIUS: Can't read config file /etc/radiusclient/radiusclient.conf. И теперь когда конектюсь по ВПН он долго проверяет логин и пароль, и заканчивается ошибкой 718: удаленный сервер неответил вовремя. да, нашол доку и там пишет такое. Check that your kernel has built-in support for MPPE encryption: 1. ### If it is not available # modprobe ppp-compress-18 && echo MPPE Module is ok FATAL: Module ppp_mppe not found. 2. ### If it is available # modprobe ppp-compress-18 && echo MPPE Module is ok MPPE Module is ok У меня получается первый вариант. Но если pptpd запустить без radius.so тогда запускается ВПН и MPPE я так понимаю тоже работает. P.S. Всем большое спосибо за помощь! Конфиги брались с Stg-2.405.9.8. Просто скопировал и подправил место нахождения Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-23 08:03:23 Автор Share Опубліковано: 2008-07-23 08:03:23 Так проблема нерешается! Все тоже! Может кто подскажет у кого такая связка завелась, Какой freeradiusserver? radiusclient?, ppd?, pptp? Может еще какието настройки должны быть, что неуказаны в этой сборке? P.S. У меня ppp-2.4.4, pptpd-1.3.4, freeradius-1.1.7, freeradiusclient-1.1.6. Os Slackeware 12.0 Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-23 11:07:13 Share Опубліковано: 2008-07-23 11:07:13 У меня. Все заводится и работает. Проверь чтобы stg стартовал ДО FreeRADIUS. И чтобы он грузил mod_radius.so. И вобще - логи в студию! Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-23 14:27:58 Автор Share Опубліковано: 2008-07-23 14:27:58 Шас будут! debug Jul 23 17:19:32 ns pptpd[23003]: MGR: Launching /usr/local/sbin/pptpctrl to handle clientJul 23 17:19:32 ns pptpd[23003]: CTRL: local address = 10.1.1.2 Jul 23 17:19:32 ns pptpd[23003]: CTRL: remote address = 192.168.1.1 Jul 23 17:19:32 ns pptpd[23003]: CTRL: pppd options file = /etc/ppp/options.pptpd Jul 23 17:19:32 ns pptpd[23003]: CTRL: Received PPTP Control Message (type: 1) Jul 23 17:19:32 ns pptpd[23003]: CTRL: Made a START CTRL CONN RPLY packet Jul 23 17:19:32 ns pptpd[23003]: CTRL: I wrote 156 bytes to the client. Jul 23 17:19:32 ns pptpd[23003]: CTRL: Sent packet to client Jul 23 17:19:32 ns pptpd[23003]: CTRL: Received PPTP Control Message (type: 7) Jul 23 17:19:32 ns pptpd[23003]: CTRL: Set parameters to 100000000 maxbps, 64 window size Jul 23 17:19:32 ns pptpd[23003]: CTRL: Made a OUT CALL RPLY packet Jul 23 17:19:32 ns pptpd[23003]: CTRL: pty_fd = 8 Jul 23 17:19:32 ns pptpd[23003]: CTRL: tty_fd = 9 Jul 23 17:19:32 ns pptpd[23004]: CTRL (PPPD Launcher): program binary = /usr/local/sbin/pppd Jul 23 17:19:32 ns pptpd[23004]: CTRL (PPPD Launcher): local address = 10.1.1.2 Jul 23 17:19:32 ns pptpd[23004]: CTRL (PPPD Launcher): remote address = 192.168.1.1 Jul 23 17:19:32 ns pptpd[23003]: CTRL: I wrote 32 bytes to the client. Jul 23 17:19:32 ns pptpd[23003]: CTRL: Sent packet to client Jul 23 17:19:32 ns pppd[23004]: using channel 142 Jul 23 17:19:32 ns pppd[23004]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x848d79bd> <pcomp> <accomp>] Jul 23 17:19:32 ns pptpd[23003]: CTRL: Received PPTP Control Message (type: 15) Jul 23 17:19:32 ns pptpd[23003]: CTRL: Got a SET LINK INFO packet with standard ACCMs Jul 23 17:19:32 ns pptpd[23003]: GRE: accepting packet #0 Jul 23 17:19:32 ns pppd[23004]: rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0x2dfe5e43> <pcomp> <accomp> <callback CBCP>] Jul 23 17:19:32 ns pppd[23004]: sent [LCP ConfRej id=0x0 <callback CBCP>] Jul 23 17:19:32 ns pptpd[23003]: GRE: accepting packet #1 Jul 23 17:19:32 ns pppd[23004]: rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0x2dfe5e43> <pcomp> <accomp>] Jul 23 17:19:32 ns pppd[23004]: sent [LCP ConfAck id=0x1 <mru 1400> <magic 0x2dfe5e43> <pcomp> <accomp>] Jul 23 17:19:35 ns pppd[23004]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x848d79bd> <pcomp> <accomp>] Jul 23 17:19:35 ns pptpd[23003]: GRE: accepting packet #2 Jul 23 17:19:35 ns pppd[23004]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x848d79bd> <pcomp> <accomp>] Jul 23 17:19:35 ns pppd[23004]: sent [CHAP Challenge id=0xf4 <cc162f7598317cf75a038bbf3fb177ac>, name = "pptpd"] Jul 23 17:19:35 ns pptpd[23003]: GRE: accepting packet #3 Jul 23 17:19:35 ns pppd[23004]: rcvd [LCP Ident id=0x2 magic=0x2dfe5e43 "MSRASV5.10"] Jul 23 17:19:35 ns pptpd[23003]: CTRL: Received PPTP Control Message (type: 15) Jul 23 17:19:35 ns pptpd[23003]: GRE: accepting packet #4 Jul 23 17:19:35 ns pppd[23004]: rcvd [LCP Ident id=0x3 magic=0x2dfe5e43 "MSRAS-0-TOLYAN"] Jul 23 17:19:35 ns pptpd[23003]: GRE: accepting packet #5 Jul 23 17:19:36 ns pppd[23004]: rcvd [CHAP Response id=0xf4 <f14e20903ad05b1535679178240e5d7100000000000000001d30f31c8e7b3e03913a86ba50658 2e0c448a220c4a9542500>, name = "ankos"] Jul 23 17:19:36 ns pptpd[23003]: GRE: accepting packet #6 Jul 23 17:19:38 ns pptpd[23003]: GRE: accepting packet #7 Jul 23 17:19:40 ns pptpd[23003]: GRE: accepting packet #8 Jul 23 17:19:42 ns pptpd[23003]: GRE: accepting packet #9 Jul 23 17:19:44 ns pptpd[23003]: GRE: accepting packet #10 Jul 23 17:19:46 ns pptpd[23003]: GRE: accepting packet #11 Jul 23 17:19:48 ns pptpd[23003]: GRE: accepting packet #12 Jul 23 17:19:50 ns pptpd[23003]: GRE: accepting packet #13 Jul 23 17:19:52 ns pptpd[23003]: GRE: accepting packet #14 Jul 23 17:19:54 ns pptpd[23003]: CTRL: Received PPTP Control Message (type: 15) Jul 23 17:19:54 ns pptpd[23003]: CTRL: Got a SET LINK INFO packet with standard ACCMs Jul 23 17:19:54 ns pptpd[23003]: GRE: accepting packet #15 Jul 23 17:19:56 ns pptpd[23003]: GRE: accepting packet #16 Jul 23 17:19:58 ns pptpd[23003]: CTRL: Received PPTP Control Message (type: 12) Jul 23 17:19:58 ns pptpd[23003]: CTRL: Made a CALL DISCONNECT RPLY packet Jul 23 17:19:58 ns pptpd[23003]: CTRL: Received CALL CLR request (closing call) Jul 23 17:19:58 ns pptpd[23003]: CTRL: Reaping child PPP[23004] Jul 23 17:20:01 ns pptpd[23029]: MGR: Launching /usr/local/sbin/pptpctrl to handle client Jul 23 17:20:01 ns pptpd[23029]: CTRL: local address = 10.1.1.2 Jul 23 17:20:01 ns pptpd[23029]: CTRL: remote address = 192.168.1.2 Jul 23 17:20:01 ns pptpd[23029]: CTRL: pppd options file = /etc/ppp/options.pptpd Jul 23 17:20:01 ns pptpd[23029]: CTRL: Received PPTP Control Message (type: 1) Jul 23 17:20:01 ns pptpd[23029]: CTRL: Made a START CTRL CONN RPLY packet Jul 23 17:20:01 ns pptpd[23029]: CTRL: I wrote 156 bytes to the client. Jul 23 17:20:01 ns pptpd[23029]: CTRL: Sent packet to client Jul 23 17:20:01 ns pptpd[23029]: CTRL: Received PPTP Control Message (type: 7) Jul 23 17:20:01 ns pptpd[23029]: CTRL: Set parameters to 100000000 maxbps, 64 window size Jul 23 17:20:01 ns pptpd[23029]: CTRL: Made a OUT CALL RPLY packet Jul 23 17:20:01 ns pptpd[23029]: CTRL: pty_fd = 8 Jul 23 17:20:01 ns pptpd[23029]: CTRL: tty_fd = 9 Jul 23 17:20:01 ns pptpd[23030]: CTRL (PPPD Launcher): program binary = /usr/local/sbin/pppd Jul 23 17:20:01 ns pptpd[23030]: CTRL (PPPD Launcher): local address = 10.1.1.2 Jul 23 17:20:01 ns pptpd[23030]: CTRL (PPPD Launcher): remote address = 192.168.1.2 Jul 23 17:20:01 ns pptpd[23029]: CTRL: I wrote 32 bytes to the client. Jul 23 17:20:01 ns pptpd[23029]: CTRL: Sent packet to client Jul 23 17:20:01 ns pppd[23030]: using channel 143 Jul 23 17:20:01 ns pppd[23030]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x3867b0df> <pcomp> <accomp>] Jul 23 17:20:01 ns pptpd[23029]: CTRL: Received PPTP Control Message (type: 15) Jul 23 17:20:01 ns pptpd[23029]: CTRL: Got a SET LINK INFO packet with standard ACCMs Jul 23 17:20:01 ns pptpd[23029]: GRE: accepting packet #0 Jul 23 17:20:01 ns pptpd[23029]: GRE: accepting packet #1 Jul 23 17:20:01 ns pppd[23030]: rcvd [LCP ConfReq id=0x0 <mru 1400> <magic 0x21dc050a> <pcomp> <accomp> <callback CBCP>] Jul 23 17:20:01 ns pppd[23030]: sent [LCP ConfRej id=0x0 <callback CBCP>] Jul 23 17:20:01 ns pppd[23030]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic 0x3867b0df> <pcomp> <accomp>] Jul 23 17:20:01 ns pptpd[23029]: GRE: accepting packet #2 Jul 23 17:20:01 ns pppd[23030]: rcvd [LCP ConfReq id=0x1 <mru 1400> <magic 0x21dc050a> <pcomp> <accomp>] Jul 23 17:20:01 ns pppd[23030]: sent [LCP ConfAck id=0x1 <mru 1400> <magic 0x21dc050a> <pcomp> <accomp>] Jul 23 17:20:01 ns pppd[23030]: sent [CHAP Challenge id=0xe5 <ac936311e8f5490bd6d0c4dd1be2929e>, name = "pptpd"] Jul 23 17:20:01 ns pptpd[23029]: CTRL: Received PPTP Control Message (type: 15) Jul 23 17:20:01 ns pptpd[23029]: GRE: accepting packet #3 Jul 23 17:20:01 ns pptpd[23029]: GRE: accepting packet #4 Jul 23 17:20:01 ns pptpd[23029]: GRE: accepting packet #5 Jul 23 17:20:01 ns pppd[23030]: rcvd [LCP Ident id=0x2 magic=0x21dc050a "MSRASV5.10"] Jul 23 17:20:01 ns pppd[23030]: rcvd [LCP Ident id=0x3 magic=0x21dc050a "MSRAS-0-TOLYAN"] Jul 23 17:20:01 ns pppd[23030]: rcvd [CHAP Response id=0xe5 <aa49e6a3393d7edbefe3e825df02b2540000000000000000a93f38c7b2dfb8caa3e375d122a5a 7b53d5b3352ab882f6500>, name = "ankos"] Jul 23 17:20:03 ns pptpd[23029]: GRE: accepting packet #6 Jul 23 17:20:05 ns pptpd[23029]: GRE: accepting packet #7 Jul 23 17:20:06 ns pptpd[23029]: CTRL: Received PPTP Control Message (type: 15) Jul 23 17:20:06 ns pptpd[23029]: CTRL: Got a SET LINK INFO packet with standard ACCMs Jul 23 17:20:06 ns pptpd[23029]: GRE: accepting packet #8 Jul 23 17:20:07 ns pptpd[23029]: GRE: accepting packet #9 Jul 23 17:20:09 ns pptpd[23029]: CTRL: Received PPTP Control Message (type: 12) Jul 23 17:20:09 ns pptpd[23029]: CTRL: Made a CALL DISCONNECT RPLY packet Jul 23 17:20:09 ns pptpd[23029]: CTRL: Received CALL CLR request (closing call) Jul 23 17:20:09 ns pptpd[23029]: CTRL: Reaping child PPP[23030] messages Jul 23 17:18:38 ns /usr/sbin/gpm[3619]: *** info [client.c(275)]: Jul 23 17:18:38 ns /usr/sbin/gpm[3619]: Request on 6 (console 0) Jul 23 17:18:38 ns /usr/sbin/gpm[3619]: *** info [client.c(284)]: Jul 23 17:18:38 ns /usr/sbin/gpm[3619]: Closing Jul 23 17:18:39 ns /usr/sbin/gpm[3619]: *** info [client.c(137)]: Jul 23 17:18:39 ns /usr/sbin/gpm[3619]: Connecting at fd 6 Jul 23 17:19:06 ns /usr/sbin/gpm[3619]: *** info [client.c(275)]: Jul 23 17:19:06 ns /usr/sbin/gpm[3619]: Request on 6 (console 0) Jul 23 17:19:06 ns /usr/sbin/gpm[3619]: *** info [client.c(284)]: Jul 23 17:19:06 ns /usr/sbin/gpm[3619]: Closing Jul 23 17:19:17 ns /usr/sbin/gpm[3619]: *** info [client.c(137)]: Jul 23 17:19:17 ns /usr/sbin/gpm[3619]: Connecting at fd 6 Jul 23 17:19:19 ns /usr/sbin/gpm[3619]: *** info [client.c(275)]: Jul 23 17:19:19 ns /usr/sbin/gpm[3619]: Request on 6 (console 0) Jul 23 17:19:19 ns /usr/sbin/gpm[3619]: *** info [client.c(284)]: Jul 23 17:19:19 ns /usr/sbin/gpm[3619]: Closing Jul 23 17:19:23 ns /usr/sbin/gpm[3619]: *** info [client.c(137)]: Jul 23 17:19:23 ns /usr/sbin/gpm[3619]: Connecting at fd 6 Jul 23 17:19:32 ns pptpd[23003]: CTRL: Client 10.1.200.112 control connection started Jul 23 17:19:32 ns pptpd[23003]: CTRL: Starting call (launching pppd, opening GRE) Jul 23 17:19:32 ns pppd[23004]: Plugin radius.so loaded. Jul 23 17:19:32 ns pppd[23004]: RADIUS plugin initialized. Jul 23 17:19:32 ns pppd[23004]: Plugin radattr.so loaded. Jul 23 17:19:32 ns pppd[23004]: RADATTR plugin initialized. Jul 23 17:19:32 ns pppd[23004]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Jul 23 17:19:32 ns pppd[23004]: pptpd-logwtmp: $Version$ Jul 23 17:19:32 ns pppd[23004]: pppd 2.4.4 started by root, uid 0 Jul 23 17:19:32 ns pppd[23004]: Using interface ppp0 Jul 23 17:19:32 ns pppd[23004]: Connect: ppp0 <--> /dev/pts/4 Jul 23 17:19:46 ns /usr/sbin/gpm[3619]: *** info [client.c(275)]: Jul 23 17:19:46 ns /usr/sbin/gpm[3619]: Request on 6 (console 0) Jul 23 17:19:46 ns /usr/sbin/gpm[3619]: *** info [client.c(284)]: Jul 23 17:19:46 ns /usr/sbin/gpm[3619]: Closing Jul 23 17:19:49 ns /usr/sbin/gpm[3619]: *** info [client.c(137)]: Jul 23 17:19:49 ns /usr/sbin/gpm[3619]: Connecting at fd 6 Jul 23 17:20:01 ns pptpd[23029]: CTRL: Client 10.1.200.112 control connection started Jul 23 17:20:01 ns pptpd[23029]: CTRL: Starting call (launching pppd, opening GRE) Jul 23 17:20:01 ns pppd[23030]: Plugin radius.so loaded. Jul 23 17:20:01 ns pppd[23030]: RADIUS plugin initialized. Jul 23 17:20:01 ns pppd[23030]: Plugin radattr.so loaded. Jul 23 17:20:01 ns pppd[23030]: RADATTR plugin initialized. Jul 23 17:20:01 ns pppd[23030]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Jul 23 17:20:01 ns pppd[23030]: pptpd-logwtmp: $Version$ Jul 23 17:20:01 ns pppd[23030]: pppd 2.4.4 started by root, uid 0 Jul 23 17:20:01 ns pppd[23030]: Using interface ppp1 Jul 23 17:20:01 ns pppd[23030]: Connect: ppp1 <--> /dev/pts/5 syslog Jul 23 17:19:32 ns pptpd[23003]: GRE: Bad checksum from pppd.Jul 23 17:19:35 ns pptpd[23003]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! Jul 23 17:20:01 ns pptpd[23029]: GRE: Bad checksum from pppd. Jul 23 17:20:01 ns pptpd[23029]: CTRL: Ignored a SET LINK INFO packet with real ACCMs! radius.log Wed Jul 23 17:18:38 2008 : Info: Using deprecated naslist file. Support for this will go away soon.Wed Jul 23 17:18:38 2008 : Info: Ready to process requests. STG стартует раньше radiusserver. modul radius.so загружен без ошибок, по крайней мере пишит в логе СТГ. Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-24 05:51:00 Share Опубліковано: 2008-07-24 05:51:00 Шас будут!debug messages syslog radius.log STG стартует раньше radiusserver. modul radius.so загружен без ошибок, по крайней мере пишит в логе СТГ. radiusd -X Вот этот лог нужен и еще консольный лог старгейзера. Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-24 12:26:04 Автор Share Опубліковано: 2008-07-24 12:26:04 radiusd -X Вот этот лог нужен и еще консольный лог старгейзера. root@ns:/usr/sbin# ./radiusd -X Starting - reading configuration files ...reread_config: reading radiusd.conf Config: including file: /usr/etc/raddb/proxy.conf Config: including file: /usr/etc/raddb/clients.conf Config: including file: /usr/etc/raddb/snmp.conf Config: including file: /usr/etc/raddb/eap.conf main: prefix = "/usr" main: localstatedir = "/usr/var" main: logdir = "/usr/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/usr/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 120 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/usr/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = yes main: log_auth_goodpass = no main: pidfile = "/usr/var/run/radiusd/radiusd.pid" main: user = "root" main: group = "root" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib rlm_stg: stg_init() Module: Loaded stg rlm_stg: stg_instantiate() stg: password = "123456" stg: server = "127.0.0.1" stg: port = 6666 stg: local_port = 6667 Module: Instantiated stg (stg) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = no Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = yes mschap: require_strong = yes mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/usr/etc/raddb/huntgroups" preprocess: hints = "/usr/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/usr/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/usr/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. Прошу прощения за тупой вопрос: как получть консольный лог старгейзера? Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-24 12:54:11 Share Опубліковано: 2008-07-24 12:54:11 Путем компиляции его в отладочном режиме. $ ./build debug ... $ sudo bash # <заменить путь к модулям в конфига на './modules' используя свой любимый текстовый редактор> # export LD_LIBRARY_PATH=../../lib # ./stargazer ... ^C # <не забыть вернуть на место путь к модулям> PS: судя по логу - pppd не запрашивает у радиуса ничего Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-24 15:20:44 Автор Share Опубліковано: 2008-07-24 15:20:44 root@ns:/usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer# ./stargazer stg_timer.cpp > 18:09:06 > STG_TIMER started. Time: 1216930146 main.cpp > 18:09:06 > Module: /usr/lib/stg/mod_auth_ao.so main.cpp > 18:09:06 > Module: /usr/lib/stg/mod_auth_ia.so main.cpp > 18:09:06 > Module: /usr/lib/stg/mod_conf_sg.so main.cpp > 18:09:06 > Module: /usr/lib/stg/mod_cap_ether.so main.cpp > 18:09:06 > Module: /usr/lib/stg/mod_cap_ipq.so main.cpp > 18:09:06 > Module: /usr/lib/stg/mod_ping.so main.cpp > 18:09:06 > Module: /usr/lib/stg/mod_radius.so ao.cpp > 18:09:06 > constructor AO_CREATOR plugin_runner.cpp > 18:09:06 > Plugin Always Online authorizator v.1.0 parsesettings inetaccess.cpp > 18:09:06 > new AUTH_IA inetaccess.cpp > 18:09:06 > sizeof(CONN_SYN_6) = 96 96 inetaccess.cpp > 18:09:06 > sizeof(CONN_SYN_8) = 96 96 inetaccess.cpp > 18:09:06 > sizeof(CONN_SYN_ACK_6) = 192 192 inetaccess.cpp > 18:09:06 > sizeof(CONN_SYN_ACK_8) = 200 200 inetaccess.cpp > 18:09:06 > sizeof(CONN_ACK_6) = 64 64 inetaccess.cpp > 18:09:06 > sizeof(ALIVE_SYN_6) = 368 368 inetaccess.cpp > 18:09:06 > sizeof(ALIVE_SYN_8) = 384 384 inetaccess.cpp > 18:09:06 > sizeof(ALIVE_ACK_6) = 64 64 inetaccess.cpp > 18:09:06 > sizeof(DISCONN_SYN_6) = 96 96 inetaccess.cpp > 18:09:06 > sizeof(DISCONN_SYN_ACK_6) = 24 24 inetaccess.cpp > 18:09:06 > sizeof(DISCONN_SYN_ACK_8) = 32 32 inetaccess.cpp > 18:09:06 > sizeof(DISCONN_ACK_6) = 64 64 inetaccess.cpp > 18:09:06 > sizeof(FIN_6) = 24 24 inetaccess.cpp > 18:09:06 > sizeof(FIN_8) = 32 32 inetaccess.cpp > 18:09:06 > sizeof(ERR) = 256 256 inetaccess.cpp > 18:09:06 > sizeof(INFO_6) = 256 256 inetaccess.cpp > 18:09:06 > sizeof(INFO_7) = 272 272 inetaccess.cpp > 18:09:06 > sizeof(INFO_8) = 1068 1072 plugin_runner.cpp > 18:09:06 > Plugin InetAccess authorizator v.1.2 parsesettings inetaccess.cpp > 18:09:06 > AUTH_IA_SETTINGS::ParseSettings s.moduleParams.size=4 stgconfig.cpp > 18:09:06 > new AUTH_IA parser.cpp > 18:09:06 > PARSER_CHG_USER::Reset() plugin_runner.cpp > 18:09:06 > Plugin Stg configurator v.0.07 parsesettings ether_cap.cpp > 18:09:06 > constructor ETHER_CAP_CREATOR plugin_runner.cpp > 18:09:06 > Plugin Ether_cap v.1.0 parsesettings constructor IPQ_CAP_CREATOR plugin_runner.cpp > 18:09:06 > Plugin ipq_cap v.1.1 parsesettings ping.cpp > 18:09:06 > constructor PING_CREATOR plugin_runner.cpp > 18:09:06 > Plugin Pinger v.1.01 parsesettings radius.cpp > 18:09:06 > RAD_CREATOR: constructor radius.cpp > 18:09:06 > RAD_CREATOR: new RADIUS plugin_runner.cpp > 18:09:06 > Plugin RADIUS data access plugin v 0.5 parsesettings radius.cpp > 18:09:06 > RAD_SETTINGS::ParseSettings s.moduleParams.size=5 traffcounter.cpp > 18:09:06 > TRAFFCOUNTER::Start() ipq_cap.cpp > 18:09:06 > IPQ_CAP::Start() ether_cap.cpp > 18:09:06 > ETHER_CAP::Start() radius.cpp > 18:09:06 > RADIUS::Start() radius.cpp > 18:09:06 > AuthServices: radius.cpp > 18:09:06 > Login-User radius.cpp > 18:09:06 > AcctServices: radius.cpp > 18:09:06 > Framed-User users.cpp > 18:09:06 > =====================| pid: 25051 |===================== users.cpp > 18:09:06 > Day = 24 Min = 9 users.cpp > 18:09:06 > Monitor=0 file USERS /users_r radius.cpp > 18:09:06 > RADIUS::Start Encryption initiated with password '123456' radius.cpp > 18:09:06 > RADIUS::PrepareNet() >>>> Start successfull. inetaccess.cpp > 18:09:06 > AUTH_IA::Start() inetaccess.cpp > 18:09:06 > AUTH_IA::PrepareNet() >>>> Start successfull. Port: 5555 ao.cpp > 18:09:06 > users->OpenSearch() usernum=17 traffcounter.cpp > 18:09:06 > AddUser: TEST users.cpp > 18:09:06 > Add IP Idx ping.cpp > 18:09:06 > users->OpenSearch() usernum=17 ping.cpp > 18:09:06 > added IPS xx.xx.xx.xx ping.cpp > 18:09:06 > PING::Start() PingDelay = 15 inetaccess.cpp > 18:09:06 > Monitor=0 file AUTH_IA /inetaccess_r inetaccess.cpp > 18:09:06 > Monitor time 1216930086 1216930206 inetaccess.cpp > 18:09:06 > Monitor=0 file AUTH_IA /inetaccess_t stgconfig.cpp > 18:09:06 > STG_CONFIG::Start() configproto.cpp > 18:09:06 > CONFIGPROTO::SetTariffs tariffs=80F6C00 configproto.cpp > 18:09:06 > CONFIGPROTO::SetTariffs settings=80E5008 configproto.cpp > 18:09:06 > CONFIGPROTO::SetTariffs tariffs=80F6C00 rsconf.cpp > 18:09:06 > CONFIGPROTO::Prepare() rsconf.cpp > 18:09:06 > STG_CONFIG::Prepare() socket - ok rsconf.cpp > 18:09:06 > STG_CONFIG::Prepare() setsockopt - ok rsconf.cpp > 18:09:06 > STG_CONFIG::Prepare() bind - ok port: 5555 rsconf.cpp > 18:09:06 > STG_CONFIG::Prepare() listen - ok ping.cpp > 18:09:06 > PING::Run stgconfig.cpp > 18:09:06 > =====================| pid: 25051 |===================== stgconfig.cpp > 18:09:06 > STG_CONFIG::Run rsconf.cpp > 18:09:06 > CONFIGPROTO: Ready to accept sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file ether_cap.cpp > 18:09:08 > =====================| pid: 25051 |===================== traffcounter.cpp > 18:09:11 > FlushAndRemove() packets: 3(rem 0) ip2packets: 6(rem 0) traffcounter.cpp > 18:09:16 > FlushAndRemove() packets: 5(rem 0) ip2packets: 10(rem 0) ping.cpp > 18:09:16 > PING::Run traffcounter.cpp > 18:09:21 > FlushAndRemove() packets: 34(rem 0) ip2packets: 68(rem 0) rsconf.cpp > 18:09:24 > Connection accepted from 127.0.0.1 rsconf.cpp > 18:09:24 > RecvHdr - ok buf = SG04 sizeof(STG_HEADER) = 4 configproto.cpp > 18:09:24 > ParseXMLStart configproto.cpp > 18:09:24 > Start parser.cpp > 18:09:24 > PARSER_GET_SERVER_INFO::ParseStart parser.cpp > 18:09:24 > PARSER_GET_SERVER_INFO::ParseEnd parser.cpp > 18:09:24 > PARSER_GET_SERVER_INFO CreateAnswer configproto.cpp > 18:09:24 > currParser == NULL rsconf.cpp > 18:09:24 > End was detected rsconf.cpp > 18:09:24 > ReciveSendConf close rsconf.cpp > 18:09:24 > CONFIGPROTO: Ready to accept rsconf.cpp > 18:09:24 > Connection accepted from 127.0.0.1 rsconf.cpp > 18:09:24 > RecvHdr - ok buf = SG04 sizeof(STG_HEADER) = 4 configproto.cpp > 18:09:24 > ParseXMLStart configproto.cpp > 18:09:24 > Start parser.cpp > 18:09:24 > PARSER_GET_SERVER_INFO::ParseStart configproto.cpp > 18:09:24 > Start parser.cpp > 18:09:24 > PARSER_GET_USERS::ParseStart configproto.cpp > 18:09:24 > Start Segmentation fault Только он начал вываливаться!? Я наверное гдето затупил Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-24 15:28:27 Share Опубліковано: 2008-07-24 15:28:27 Только он начал вываливаться!?Я наверное гдето затупил Путь к модулям в конфиге сменил? Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-24 15:58:08 Автор Share Опубліковано: 2008-07-24 15:58:08 Теперь точно изменил! root@ns:~# root@ns:/usr/sbin# ./stargazer stg_timer.cpp > 19:29:39 > STG_TIMER started. Time: 1216934979 main.cpp > 19:29:39 > Module: /usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer/modules/mod_auth_ao.so main.cpp > 19:29:39 > Module: /usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer/modules/mod_auth_ia.so main.cpp > 19:29:39 > Module: /usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer/modules/mod_conf_sg.so main.cpp > 19:29:39 > Module: /usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer/modules/mod_cap_ether.so main.cpp > 19:29:39 > Module: /usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer/modules/mod_cap_ipq.so main.cpp > 19:29:39 > Module: /usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer/modules/mod_ping.so main.cpp > 19:29:39 > Module: /usr/src/stg11/stg-2.405.9.8_STG-WEB/projects/stargazer/modules/mod_radius.so ao.cpp > 19:29:39 > constructor AO_CREATOR plugin_runner.cpp > 19:29:39 > Plugin Always Online authorizator v.1.0 parsesettings inetaccess.cpp > 19:29:39 > new AUTH_IA inetaccess.cpp > 19:29:39 > sizeof(CONN_SYN_6) = 96 96 inetaccess.cpp > 19:29:39 > sizeof(CONN_SYN_8) = 96 96 inetaccess.cpp > 19:29:39 > sizeof(CONN_SYN_ACK_6) = 192 192 inetaccess.cpp > 19:29:39 > sizeof(CONN_SYN_ACK_8) = 200 200 inetaccess.cpp > 19:29:39 > sizeof(CONN_ACK_6) = 64 64 inetaccess.cpp > 19:29:39 > sizeof(ALIVE_SYN_6) = 368 368 inetaccess.cpp > 19:29:39 > sizeof(ALIVE_SYN_8) = 384 384 inetaccess.cpp > 19:29:39 > sizeof(ALIVE_ACK_6) = 64 64 inetaccess.cpp > 19:29:39 > sizeof(DISCONN_SYN_6) = 96 96 inetaccess.cpp > 19:29:39 > sizeof(DISCONN_SYN_ACK_6) = 24 24 inetaccess.cpp > 19:29:39 > sizeof(DISCONN_SYN_ACK_8) = 32 32 inetaccess.cpp > 19:29:39 > sizeof(DISCONN_ACK_6) = 64 64 inetaccess.cpp > 19:29:39 > sizeof(FIN_6) = 24 24 inetaccess.cpp > 19:29:39 > sizeof(FIN_8) = 32 32 inetaccess.cpp > 19:29:39 > sizeof(ERR) = 256 256 inetaccess.cpp > 19:29:39 > sizeof(INFO_6) = 256 256 inetaccess.cpp > 19:29:39 > sizeof(INFO_7) = 272 272 inetaccess.cpp > 19:29:39 > sizeof(INFO_8) = 1068 1072 plugin_runner.cpp > 19:29:39 > Plugin InetAccess authorizator v.1.2 parsesettings inetaccess.cpp > 19:29:39 > AUTH_IA_SETTINGS::ParseSettings s.moduleParams.size=4 stgconfig.cpp > 19:29:39 > new AUTH_IA parser.cpp > 19:29:39 > PARSER_CHG_USER::Reset() plugin_runner.cpp > 19:29:39 > Plugin Stg configurator v.0.07 parsesettings ether_cap.cpp > 19:29:39 > constructor ETHER_CAP_CREATOR plugin_runner.cpp > 19:29:39 > Plugin Ether_cap v.1.0 parsesettings constructor IPQ_CAP_CREATOR plugin_runner.cpp > 19:29:39 > Plugin ipq_cap v.1.1 parsesettings ping.cpp > 19:29:39 > constructor PING_CREATOR plugin_runner.cpp > 19:29:39 > Plugin Pinger v.1.01 parsesettings radius.cpp > 19:29:39 > RAD_CREATOR: constructor radius.cpp > 19:29:39 > RAD_CREATOR: new RADIUS plugin_runner.cpp > 19:29:39 > Plugin RADIUS data access plugin v 0.5 parsesettings radius.cpp > 19:29:39 > RAD_SETTINGS::ParseSettings s.moduleParams.size=5 traffcounter.cpp > 19:29:39 > TRAFFCOUNTER::Start() ipq_cap.cpp > 19:29:39 > IPQ_CAP::Start() ether_cap.cpp > 19:29:39 > ETHER_CAP::Start() radius.cpp > 19:29:39 > RADIUS::Start() radius.cpp > 19:29:39 > AuthServices: radius.cpp > 19:29:39 > Login-User radius.cpp > 19:29:39 > AcctServices: radius.cpp > 19:29:39 > Framed-User radius.cpp > 19:29:39 > RADIUS::Start Encryption initiated with password '123456' radius.cpp > 19:29:39 > RADIUS::PrepareNet() >>>> Start successfull. inetaccess.cpp > 19:29:39 > AUTH_IA::Start() inetaccess.cpp > 19:29:39 > AUTH_IA::PrepareNet() >>>> Start successfull. Port: 5555 users.cpp > 19:29:39 > =====================| pid: 26817 |===================== users.cpp > 19:29:39 > Day = 24 Min = 29 users.cpp > 19:29:39 > Monitor=0 file USERS /users_r inetaccess.cpp > 19:29:39 > Monitor=0 file AUTH_IA /inetaccess_r inetaccess.cpp > 19:29:39 > Monitor time 1216934919 1216935039 ao.cpp > 19:29:39 > users->OpenSearch() usernum=17 traffcounter.cpp > 19:29:39 > AddUser: TEST users.cpp > 19:29:39 > Add IP Idx ping.cpp > 19:29:39 > users->OpenSearch() usernum=17 ping.cpp > 19:29:39 > added IPS xx.xx.xx.xx ping.cpp > 19:29:39 > PING::Start() PingDelay = 15 stgconfig.cpp > 19:29:39 > STG_CONFIG::Start() configproto.cpp > 19:29:39 > CONFIGPROTO::SetTariffs tariffs=80F6D48 configproto.cpp > 19:29:39 > CONFIGPROTO::SetTariffs settings=80E5008 configproto.cpp > 19:29:39 > CONFIGPROTO::SetTariffs tariffs=80F6D48 rsconf.cpp > 19:29:39 > CONFIGPROTO::Prepare() rsconf.cpp > 19:29:39 > STG_CONFIG::Prepare() socket - ok rsconf.cpp > 19:29:39 > STG_CONFIG::Prepare() setsockopt - ok rsconf.cpp > 19:29:39 > STG_CONFIG::Prepare() bind - ok port: 5555 rsconf.cpp > 19:29:39 > STG_CONFIG::Prepare() listen - ok inetaccess.cpp > 19:29:39 > Monitor=0 file AUTH_IA /inetaccess_t ping.cpp > 19:29:39 > PING::Run stgconfig.cpp > 19:29:39 > =====================| pid: 26817 |===================== stgconfig.cpp > 19:29:39 > STG_CONFIG::Run rsconf.cpp > 19:29:39 > CONFIGPROTO: Ready to accept sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file sh: /etc/stargazer//OnConnect: cannot execute binary file ether_cap.cpp > 19:29:41 > =====================| pid: 26817 |===================== Ссылка на сообщение Поделиться на других сайтах
ankos 19 Опубліковано: 2008-07-25 09:02:35 Автор Share Опубліковано: 2008-07-25 09:02:35 Что говорят логи? Вроди сам СТГ нормально запускается!? Ссылка на сообщение Поделиться на других сайтах
madf 279 Опубліковано: 2008-07-25 09:24:20 Share Опубліковано: 2008-07-25 09:24:20 Я же говорил уже выше - pppd не отправляет радиусу запросов. Смотри его настройки. Ссылка на сообщение Поделиться на других сайтах
starki 0 Опубліковано: 2008-08-07 18:00:27 Share Опубліковано: 2008-08-07 18:00:27 Не стал создавать новую тему. Ситуация похожа. Версия freeradius 1.1.7 При авторизации радиус вываливается с сообщением "Ошибка сегментирования". Вот кусок вывода radiusd -X: Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 127.0.0.1:39575, id=171, length=63 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "test" Calling-Station-Id = "192.168.1.5" NAS-IP-Address = 192.168.1.111 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "test", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 rlm_stg: stg_authorize() Ошибка сегментирования root@dm:/etc/raddb# radiusd.conf сделан по образцу. В выводе отладки старгазера даже намёков на попытку радиуса с ним связаться нет. Кусок stargazer.conf касательно подключения модуля: <Module radius> Password = 123456 ServerIP = 127.0.0.1 Port = 6666 AuthServices = Login-User AcctServices = Framed-User </Module> Кудаб еще копнуть? Ссылка на сообщение Поделиться на других сайтах
Рекомендованные сообщения
Создайте аккаунт или войдите в него для комментирования
Вы должны быть пользователем, чтобы оставить комментарий
Создать аккаунт
Зарегистрируйтесь для получения аккаунта. Это просто!
Зарегистрировать аккаунтВхід
Уже зарегистрированы? Войдите здесь.
Войти сейчас