Alcatel OmniStack LS 6224 в режиме стека ?

[the_prodigy_man 1]

вот лог с консоли:

 

Boot1 Checksum Test...............................PASS

 

Boot2 Checksum Test...............................PASS

 

Flash Image Validation Test.......................PASS

 

 

 

BOOT Software Version 1.0.0.13 Built  02-Aug-2009  08:24:59

 

 OS6200 board, based on PPC8247

 128 MByte SDRAM. I-Cache 16 KB. D-Cache 16 KB. Cache Enabled.

 

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.

Preparing to decompress...

 100%

Decompressing SW from image-1

 100%

 

OK

Running from RAM...

 

********************************************************************

*** Running  SW  Ver. 1.7.1.7  Date  12-May-2010  Time  16:32:04 ***

********************************************************************

 

HW version is 00.00.01

Base Mac address is: 00:12:cf:7e:da:e0

Dram size is  : 128M bytes

Dram first block size is  : 98304K bytes

Dram first PTR is  : 0x2000000

Flash size is: 16M

01-Jan-2000 01:01:04 %CDB-I-LOADCONFIG: Loading running configuration.

01-Jan-2000 01:01:05 %CDB-I-LOADCONFIG: Loading startup configuration.

Device configuration:

CPLD revision:  1.03

PCB revision: R-0A

Slot 1 - OmniStack LS 6224 HW Rev.  1.3

 

------------------------------------

-- Unit Number 2  Master Enabled --

------------------------------------

 

01-Jan-2000 01:01:27 %INIT-I-InitCompleted: Initialization task is completed

 

 

>Tapi Version: v1.3.3.1

Core Version: v1.3.3.1

01-Jan-2000 01:01:28 %Box-I-SFP-PRESENT-CHNG: unit_id 2 SFP 0 status is present.

01-Jan-2000 01:01:28 %Box-I-SFP-PRESENT-CHNG: unit_id 2 SFP 1 status is not present.

01-Jan-2000 01:01:29 %SNMP-I-CDBITEMSNUM: Number of running configuration items loaded: 12

 

01-Jan-2000 01:01:29 %SNMP-I-CDBITEMSNUM: Number of startup configuration items loaded: 12

01-Jan-2000 01:01:29 %Box-I-STCK-CFG-CHNG: Configuration changed: chain .

 

>lcli

 

console> 01-Jan-2000 01:01:30 %Box-I-SFP-PRESENT-CHNG: unit_id 2 SFP 0 status is present.

01-Jan-2000 01:01:30 %Box-I-SFP-PRESENT-CHNG: unit_id 2 SFP 1 status is not present.

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e1

01-Jan-2000 01:01:30 %LINK-I-Up:  Vlan 1

01-Jan-2000 01:01:30 %LINK-I-Up:  2/e2

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e3

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e4

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e5

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e6

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e7

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e8

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e9

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e10

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e11

01-Jan-2000 01:01:30 %LINK-W-Down:  2/e12

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e13

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e14

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e15

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e16

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e17

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e18

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e19

01-Jan-2000 01:01:31 %LINK-I-Up:  2/e20

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e21

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e22

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e23

01-Jan-2000 01:01:31 %LINK-W-Down:  2/e24

01-Jan-2000 01:01:31 %LINK-W-Down:  2/g1

01-Jan-2000 01:01:31 %LINK-W-Down:  2/g2

01-Jan-2000 01:01:32 %Box-I-SFP-PRESENT-CHNG: unit_id 2 SFP 0 status is present.

01-Jan-2000 01:01:32 %Box-I-SFP-PRESENT-CHNG: unit_id 2 SFP 1 status is not present.

01-Jan-2000 01:01:33 %Box-I-PS-STAT-CHNG: PS# 1 status is - operational.

01-Jan-2000 01:01:33 %Entity-I-SEND-ENT-CONF-CHANGE-TRAP: entity configuration change trap.

01-Jan-2000 01:02:00 %STP-W-PORTSTATUS: 2/e2: STP status Forwarding

01-Jan-2000 01:02:01 %STP-W-PORTSTATUS: 2/e20: STP status Forwarding

 

 

Смущает вот эта строчка:

------------------------------------

-- Unit Number 2  Master Enabled --

------------------------------------

 

Это после сброса настроек.

 

Как сделать чтобы перейти в UNIT 1

[Abram 98]

Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.

Вот тут нажать enter, там будет загрузочное меню. В нем можно указать роль коммутатора в стеке.

[Kovalchukvv 8]

или зажать кнопку при включении  и по лампочкам установить его номер в стеке