cyo_international 0 Опубликовано: 2016-03-19 00:49:23 Share Опубликовано: 2016-03-19 00:49:23 PON ports are not set off ONU not registered, but the traffic is not successfully pass on PON ports. please help Ссылка на сообщение Поделиться на других сайтах
Кузьменко. 15 Опубліковано: 2016-03-19 00:55:20 Share Опубліковано: 2016-03-19 00:55:20 set to default all pon ports, than shut up them Ссылка на сообщение Поделиться на других сайтах
cyo_international 0 Опубліковано: 2016-03-19 02:25:39 Автор Share Опубліковано: 2016-03-19 02:25:39 set to default all pon ports, than shut up them Thank you for reply. i already reset to default the olt but still no traffic in pon ports. im receving this messages: Mar 18 16:24:34 %OLT-STATUS: OLT index 0, slot 0, module 0, device 0x00000000, MAC address 0013.2500.0000 is waiting for image. Mar 18 16:24:34 %OLT-STATUS: OLT index 0, module 0, device 0x00000000, MAC address 0013.2500.0000 is Downloading image. Mar 18 16:24:34 Switch System started -- Mar 18 16:24:34 User default logouted on console 0 Mar 18 16:24:36 %OLT-STATUS: OLT index 0, slot 0, module 0, device 0x00000000, MAC address 0013.2500.0000 is shutting down. Ссылка на сообщение Поделиться на других сайтах
cyo_international 0 Опубліковано: 2016-03-19 02:30:48 Автор Share Опубліковано: 2016-03-19 02:30:48 pon ports set to default. no shut down comand all pon ports.ONU is registerd successfull. PC >>>> g0 / 2 >> OLT >>> PON1 >>> ONU >> PC (no ping found) Ссылка на сообщение Поделиться на других сайтах
Darth Vader2 33 Опубліковано: 2016-03-19 03:17:42 Share Опубліковано: 2016-03-19 03:17:42 show your conf please Ссылка на сообщение Поделиться на других сайтах
cyo_international 0 Опубліковано: 2016-03-19 03:32:17 Автор Share Опубліковано: 2016-03-19 03:32:17 show your conf please Switch#show running-config Building configuration... Current configuration: ! !version 10.1.0B build 13202 service timestamps log date service timestamps debug date ! ! ! ! ! ! ! ! ! ! ! ! ! spanning-tree mode rstp ! ! ! ! ! ! ! ! !!slot 0 82 interface GigaEthernet0/1 ! interface GigaEthernet0/2 ! interface GigaEthernet0/3 ! interface GigaEthernet0/4 ! interface GigaEthernet0/5 ! interface GigaEthernet0/6 ! interface EPON0/1 ! interface EPON0/2 ! interface EPON0/3 epon bind-onu mac fcfa.f79a.3796 1 ! interface EPON0/3:1 onu-configuration !!onu-configuration-end ! interface EPON0/4 ! !!slot end ! interface VLAN1 ip address 192.168.5.9 255.255.255.0 ! ! ! vlan 1 ! ! ! ! ! ! ! ! !Pending configurations for absent linecards: ! !No configurations pending global here is my config thanks for the reply Ссылка на сообщение Поделиться на других сайтах
cyo_international 0 Опубліковано: 2016-03-19 03:52:24 Автор Share Опубліковано: 2016-03-19 03:52:24 PC1-----------<LAN>-----(OLT)--------<fiber>---(ONU)-----<LAN>-------PC2 Pc1 address 192.168.5.8 olt address 192.168.5.9 pc2 address 192.168.5.6 ping from pc 1 to olt is ok ping from pc 1 to pc 2 not ok ONU is registred to olt. PON link is ok. but no traffic is passing. Ссылка на сообщение Поделиться на других сайтах
KaYot 3 718 Опубліковано: 2016-03-19 17:32:25 Share Опубліковано: 2016-03-19 17:32:25 There is no any vlan configuration on ether and epon ports.. How can traffic pass? Ссылка на сообщение Поделиться на других сайтах
sanyadnepr 305 Опубліковано: 2016-03-19 20:48:30 Share Опубліковано: 2016-03-19 20:48:30 interface GigaEthernet0/1 interface GigaEthernet0/1 description Uplink switchport mode trunk interface EPON0/1 interface EPON0/1 switchport mode trunk interface EPON0/3 epon bind-onu mac fcfa.f79a.3796 1 interface EPON0/3 switchport mode trunk interface EPON0/3:1 onu-configuration !!onu-configuration-end ! interface EPON0/1:1 onu-configuration epon onu port 1 ctc vlan mode transparent or(epon onu port 1 ctc vlan mode tag 1) epon onu port 1 ctc loopback detect !!onu-configuration-end Ссылка на сообщение Поделиться на других сайтах
Darth Vader2 33 Опубліковано: 2016-03-19 22:51:31 Share Опубліковано: 2016-03-19 22:51:31 read this please like example simple a particular config http://pipekva.blogspot.com/2013/12/olt-bdcom-p3310b.html and reading a manual for your requirements https://www.dropbox.com/sh/1flvid0y83ln8qe/pdr-z13vSK Ссылка на сообщение Поделиться на других сайтах
Рекомендованные сообщения
Создайте аккаунт или войдите в него для комментирования
Вы должны быть пользователем, чтобы оставить комментарий
Создать аккаунт
Зарегистрируйтесь для получения аккаунта. Это просто!
Зарегистрировать аккаунтВхід
Уже зарегистрированы? Войдите здесь.
Войти сейчас