Перейти до

нет трафика в OLT портов PON Помогите!


Рекомендованные сообщения

set to default all pon ports, than shut up them

Thank you for reply. i already reset to default the olt but still no traffic in pon ports. 

im receving this messages:

 

Mar 18 16:24:34 %OLT-STATUS: OLT index 0, slot 0, module 0, device 0x00000000, MAC address 0013.2500.0000 is waiting for image.
Mar 18 16:24:34 %OLT-STATUS: OLT index 0, module 0, device 0x00000000, MAC address 0013.2500.0000 is Downloading image.
Mar 18 16:24:34 Switch System started --
Mar 18 16:24:34 User default logouted on console 0
Mar 18 16:24:36 %OLT-STATUS: OLT index 0, slot 0, module 0, device 0x00000000, MAC address 0013.2500.0000 is shutting down.
Ссылка на сообщение
Поделиться на других сайтах

show your conf please

Switch#show running-config 
Building configuration...
 
 
Current configuration:
!
!version 10.1.0B build 13202
service timestamps log date
service timestamps debug date
!
!
!
!
!
!
!
!
!
!
!
!
!
spanning-tree mode rstp
!
!
!
!
!
!
!         
!
 
!!slot 0 82
interface GigaEthernet0/1
!
interface GigaEthernet0/2
!
interface GigaEthernet0/3
!
interface GigaEthernet0/4
!
interface GigaEthernet0/5
!
interface GigaEthernet0/6
!
interface EPON0/1
!
interface EPON0/2
!
interface EPON0/3
 epon bind-onu mac fcfa.f79a.3796 1
!
interface EPON0/3:1
 onu-configuration
!!onu-configuration-end
!
interface EPON0/4
!
!!slot end
!
interface VLAN1
 ip address 192.168.5.9 255.255.255.0
!
!
!
vlan 1
!
!
!
!
!
!
!
!
!Pending configurations for absent linecards:
!         
!No configurations pending global
 
here is my config thanks for the reply
Ссылка на сообщение
Поделиться на других сайтах

PC1-----------<LAN>-----(OLT)--------<fiber>---(ONU)-----<LAN>-------PC2

 

Pc1 address 192.168.5.8

olt address 192.168.5.9 

pc2 address 192.168.5.6

 

ping from pc 1 to olt is ok

ping from pc 1 to pc 2 not ok

 

ONU is registred to olt. PON link is ok.

but no traffic is passing.

Ссылка на сообщение
Поделиться на других сайтах

interface GigaEthernet0/1


interface GigaEthernet0/1
 description Uplink
 switchport mode trunk

 

interface EPON0/1


interface EPON0/1
 switchport mode trunk

interface EPON0/3  epon bind-onu mac fcfa.f79a.3796 1


interface EPON0/3
 switchport mode trunk

interface EPON0/3:1  onu-configuration !!onu-configuration-end


!
interface EPON0/1:1
 onu-configuration
  epon onu port 1 ctc vlan mode transparent 
or(epon onu port 1 ctc vlan mode tag 1)
  epon onu port 1 ctc loopback detect
  !!onu-configuration-end

Ссылка на сообщение
Поделиться на других сайтах

Создайте аккаунт или войдите в него для комментирования

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйтесь для получения аккаунта. Это просто!

Зарегистрировать аккаунт

Вхід

Уже зарегистрированы? Войдите здесь.

Войти сейчас
  • Зараз на сторінці   0 користувачів

    Немає користувачів, що переглядають цю сторінку.

×
×
  • Створити нове...