Mikrotik + два ADSL

[FreeLine]

Всем привет!

Ребята, есть два АДСЛ канала, один от Укртелефона, а другой Велтон. На Велтоне статический ИП.

Ниже конфигурация сервера. Все как-бы должно работать, но не хочет Когда включен один из провайдеров, все бегает, как только подключаю второй все ложиться Куда копать, уже и сам не знаю... Помогите)))))))))))

 

/ip route> print 
Flags: X - disabled, A - active, D - dynamic, 
C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme, 
B - blackhole, U - unreachable, P - prohibit 
#      DST-ADDRESS        PREF-SRC        GATEWAY-STATE GATEWAY            DISTANCE INTERFACE  
0 A S  0.0.0.0/0                          unreachable   ukrtelecom         1                   
1 A S  0.0.0.0/0                          unreachable   ukrtelecom         1                   
                                          reachable     velton                      velton     
2 A S  0.0.0.0/0                          reachable     velton             1        velton     
3 ADC  85.90.212.7/32     85.90.Х.Х                                    0        velton     
4 ADC  192.168.0.0/24     192.168.0.1                                      0        local      

 

> ip address print 
Flags: X - disabled, I - invalid, D - dynamic 
#   ADDRESS            NETWORK         BROADCAST       INTERFACE                               
0   192.168.0.1/24     192.168.0.0     192.168.0.255   local                                   
1 D 85.90.Х.Х/32   85.90.212.7     0.0.0.0         velton                                  
2 D 92.113.37.85/32    195.5.5.201     0.0.0.0         ukrtelecom                              

 

interface print 
Flags: D - dynamic, X - disabled, R - running, S - slave 
#     NAME                                                               TYPE             MTU  
0  R  inet1                                                              ether            1500 
1  R  inet2                                                              ether            1500 
2  R  local                                                              ether            1500 
3  X  ukrtelecom                                                         pppoe-out       
4  R  velton                                                             pppoe-out        1480 

 

ip firewall nat print 
Flags: X - disabled, I - invalid, D - dynamic 
0 I ;;; ukrtelecom
    chain=srcnat action=masquerade src-address=192.168.0.0/24 out-interface=ukrtelecom 

1   ;;; velton
    chain=srcnat action=masquerade src-address=192.168.0.0/24 out-interface=velton 

 

ip firewall mangle print 
Flags: X - disabled, I - invalid, D - dynamic 
0 I chain=input action=mark-connection new-connection-mark=ukrtelecom passthrough=yes 
    in-interface=ukrtelecom 

1   chain=input action=mark-connection new-connection-mark=velton passthrough=yes 
    in-interface=velton 

2   chain=output action=mark-routing new-routing-mark=to_ukrtelecom passthrough=yes 
    connection-mark=ukrtelecom 

3   chain=output action=mark-routing new-routing-mark=to_velton passthrough=yes 
    connection-mark=velton 

[Mobil]

Для начала промаркируй пакеты, что бы было видно какой пакет откуда идет.

 

Так же обрати внимание на маршрутизацию, может быть что то совпадает там...

[Prime]

в таблице маршрутов чтото не увидел куда заруливать маркированным пакетам, которые промаркировал через mangle

[tramX]

http://shop.esstream.com/index.php/mikrotik-routerboard/15-mikrotik-rb750-pppoe.html

[FreeLine]

[admin@ISA] > export 
# aug/17/2010 17:28:09 by RouterOS 3.22
# software id = AK73-PET
#
/interface ethernet
set 0 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes mac-address=00:17:9A:BF:EA:22 \
   mtu=1500 name=inet1 speed=100Mbps
set 1 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes mac-address=00:24:01:02:8D:3F \
   mtu=1500 name=inet2 speed=100Mbps
set 2 arp=enabled auto-negotiation=yes cable-settings=default comment="" disable-running-check=yes disabled=no full-duplex=yes mac-address=00:13:8F:71:20:4E \
   mtu=1500 name=local speed=100Mbps
/interface wireless security-profiles
set default authentication-types="" eap-methods=passthrough group-ciphers="" group-key-update=5m interim-update=0s management-protection=disabled \
   management-protection-key="" mode=none name=default radius-eap-accounting=no radius-mac-accounting=no radius-mac-authentication=no radius-mac-caching=\
   disabled radius-mac-format=XX:XX:XX:XX:XX:XX radius-mac-mode=as-username static-algo-0=none static-algo-1=none static-algo-2=none static-algo-3=none \
   static-key-0="" static-key-1="" static-key-2="" static-key-3="" static-sta-private-algo=none static-sta-private-key="" static-transmit-key=key-0 \
   supplicant-identity=MikroTik tls-certificate=none tls-mode=no-certificates unicast-ciphers="" wpa-pre-shared-key="" wpa2-pre-shared-key=""
/ip hotspot profile
set default dns-name="" hotspot-address=0.0.0.0 html-directory=hotspot http-cookie-lifetime=3d http-proxy=0.0.0.0:0 login-by=cookie,http-chap name=default \
   rate-limit="" smtp-server=0.0.0.0 split-user-domain=no use-radius=no
/ip hotspot user profile
set default idle-timeout=none keepalive-timeout=2m name=default shared-users=1 status-autorefresh=1m transparent-proxy=no
/ip ipsec proposal
set default auth-algorithms=sha1 disabled=no enc-algorithms=3des lifetime=30m name=default pfs-group=modp1024
/port
set 0 baud-rate=9600 data-bits=8 flow-control=hardware name=serial0 parity=none stop-bits=1
set 1 data-bits=8 flow-control=none name=virtual0 parity=none stop-bits=1
/ppp profile
set default change-tcp-mss=yes comment="" name=default only-one=default use-compression=default use-encryption=default use-vj-compression=default
set default-encryption change-tcp-mss=yes comment="" name=default-encryption only-one=default use-compression=default use-encryption=yes use-vj-compression=\
   default
/interface pppoe-client
add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" dial-on-demand=no disabled=yes interface=inet2 max-mru=1480 max-mtu=1480 mrru=\
   disabled name=ukrtelecom password=********** profile=default service-name="" use-peer-dns=no user=********@dsl.ukrtel.net
add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" dial-on-demand=no disabled=no interface=inet1 max-mru=1480 max-mtu=1480 mrru=\
   disabled name=velton password=*********** profile=default service-name="" use-peer-dns=no user=***********
/queue type
set default kind=pfifo name=default pfifo-limit=50
set ethernet-default kind=pfifo name=ethernet-default pfifo-limit=50
set wireless-default kind=sfq name=wireless-default sfq-allot=1514 sfq-perturb=5
set synchronous-default kind=red name=synchronous-default red-avg-packet=1000 red-burst=20 red-limit=60 red-max-threshold=50 red-min-threshold=10
set hotspot-default kind=sfq name=hotspot-default sfq-allot=1514 sfq-perturb=5
set default-small kind=pfifo name=default-small pfifo-limit=10
/routing bgp instance
set default as=65530 client-to-client-reflection=yes comment="" disabled=no ignore-as-path-len=no name=default out-filter="" redistribute-connected=no \
   redistribute-ospf=no redistribute-other-bgp=no redistribute-rip=no redistribute-static=no router-id=0.0.0.0
/routing ospf instance
set default comment="" disabled=no distribute-default=never metric-bgp=20 metric-connected=20 metric-default=1 metric-other-ospf=20 metric-rip=20 \
   metric-static=20 name=default redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no redistribute-rip=no redistribute-static=no \
   router-id=0.0.0.0
/routing ospf area
set backbone area-id=0.0.0.0 disabled=no instance=default name=backbone type=default
/routing ospf-v3 instance
set default comment="" disabled=no distribute-default=never metric-bgp=20 metric-connected=20 metric-default=1 metric-other-ospf=20 metric-rip=20 \
   metric-static=20 name=default redistribute-bgp=no redistribute-connected=no redistribute-other-ospf=no redistribute-rip=no redistribute-static=no \
   router-id=0.0.0.0
/routing ospf-v3 area
set backbone area-id=0.0.0.0 disabled=no instance=default name=backbone type=default
/snmp
set contact="" enabled=no engine-boots=0 engine-id="" location="" time-window=15 trap-sink=0.0.0.0 trap-version=1
/snmp community
set public address=0.0.0.0/0 authentication-password="" authentication-protocol=MD5 encryption-password="" encryption-protocol=DES name=public read-access=\
   yes security=none write-access=no
/system logging action
set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory
set disk disk-file-count=2 disk-file-name=log disk-lines-per-file=100 disk-stop-on-full=no name=disk target=disk
set echo name=echo remember=yes target=echo
set remote bsd-syslog=no name=remote remote=0.0.0.0:514 src-address=0.0.0.0 syslog-facility=daemon syslog-severity=auto target=remote
/user group
add name=read policy=local,telnet,ssh,reboot,read,test,winbox,password,web,sniff,!ftp,!write,!policy
add name=write policy=local,telnet,ssh,reboot,read,write,test,winbox,password,web,sniff,!ftp,!policy
add name=full policy=local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,password,web,sniff
/interface bridge settings
set use-ip-firewall=no use-ip-firewall-for-pppoe=no use-ip-firewall-for-vlan=no
/interface ethernet mirror
set
/interface l2tp-server server
set authentication=pap,chap,mschap1,mschap2 default-profile=default-encryption enabled=no max-mru=1460 max-mtu=1460 mrru=disabled
/interface ovpn-server server
set auth=sha1,md5 certificate=none cipher=blowfish128,aes128 default-profile=default enabled=no keepalive-timeout=60 mac-address=FE:AA:EA:7C:58:C0 max-mtu=\
   1500 mode=ip netmask=24 port=1194 require-client-certificate=no
/interface pptp-server server
set authentication=mschap1,mschap2 default-profile=default-encryption enabled=no keepalive-timeout=30 max-mru=1460 max-mtu=1460 mrru=disabled
/interface wireless align
set active-mode=yes audio-max=-20 audio-min=-100 audio-monitor=00:00:00:00:00:00 filter-mac=00:00:00:00:00:00 frame-size=300 frames-per-second=25 \
   receive-all=no ssid-all=no
/interface wireless sniffer
set channel-time=200ms file-limit=10 file-name="" memory-limit=10 multiple-channels=no only-headers=no receive-errors=no streaming-enabled=no \
   streaming-max-rate=0 streaming-server=0.0.0.0
/interface wireless snooper
set channel-time=200ms multiple-channels=yes receive-errors=no
/ip accounting
set account-local-traffic=no enabled=no threshold=256
/ip accounting web-access
set accessible-via-web=no address=0.0.0.0/0
/ip address
add address=192.168.0.1/24 broadcast=192.168.0.255 comment="" disabled=no interface=local network=192.168.0.0
/ip dhcp-server config
set store-leases-disk=5m
/ip dns
set allow-remote-requests=yes cache-max-ttl=1w cache-size=2048KiB max-udp-packet-size=512 primary-dns=208.67.222.222 secondary-dns=208.67.220.220
/ip firewall connection tracking
set enabled=yes generic-timeout=10m icmp-timeout=10s tcp-close-timeout=10s tcp-close-wait-timeout=10s tcp-established-timeout=1d tcp-fin-wait-timeout=10s \
   tcp-last-ack-timeout=10s tcp-syn-received-timeout=5s tcp-syn-sent-timeout=5s tcp-syncookie=no tcp-time-wait-timeout=10s udp-stream-timeout=3m \
   udp-timeout=10s
/ip firewall mangle
add action=mark-connection chain=input comment="" disabled=no in-interface=ukrtelecom new-connection-mark=ukrtelecom passthrough=yes
add action=mark-connection chain=input comment="" disabled=no in-interface=velton new-connection-mark=velton passthrough=yes
add action=mark-routing chain=output comment="" connection-mark=ukrtelecom disabled=no new-routing-mark=to_ukrtelecom passthrough=yes
add action=mark-routing chain=output comment="" connection-mark=velton disabled=no new-routing-mark=to_velton passthrough=yes
/ip firewall nat
add action=masquerade chain=srcnat comment=ukrtelecom disabled=no out-interface=ukrtelecom src-address=192.168.0.0/24
add action=masquerade chain=srcnat comment=velton disabled=no out-interface=velton src-address=192.168.0.0/24
/ip firewall service-port
set ftp disabled=no ports=21
set tftp disabled=no ports=69
set irc disabled=no ports=6667
set h323 disabled=no
set sip disabled=no ports=5060,5061
set pptp disabled=no
/ip hotspot service-port
set ftp disabled=no ports=21
/ip neighbor discovery
set inet1 discover=yes
set inet2 discover=yes
set local discover=yes
set ukrtelecom discover=no
set velton discover=no
/ip proxy
set always-from-cache=no cache-administrator=webmaster cache-hit-dscp=4 cache-on-disk=no enabled=no max-cache-size=unlimited max-client-connections=600 \
   max-fresh-time=3d max-server-connections=600 parent-proxy=0.0.0.0 parent-proxy-port=0 port=8080 serialize-connections=no src-address=0.0.0.0
/ip route
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=ukrtelecom routing-mark=to_ukrtelecom scope=255 target-scope=10
add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=velton routing-mark=to_velton scope=255 target-scope=10
add check-gateway=ping comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=velton,ukrtelecom scope=255 target-scope=10
/ip service
set telnet address=0.0.0.0/0 disabled=no port=23
set ftp address=0.0.0.0/0 disabled=no port=21
set www address=0.0.0.0/0 disabled=no port=80
set ssh address=0.0.0.0/0 disabled=no port=22
set www-ssl address=0.0.0.0/0 certificate=none disabled=yes port=443
set api address=0.0.0.0/0 disabled=yes port=8728
set winbox address=0.0.0.0/0 disabled=no port=8291
/ip socks
set connection-idle-timeout=2m enabled=no max-connections=200 port=1080
/ip traffic-flow
set active-flow-timeout=30m cache-entries=4k enabled=no inactive-flow-timeout=15s interfaces=all
/ip upnp
set allow-disable-external-interface=yes enabled=no show-dummy-rule=yes
/ipv6 nd
add advertise-dns=no advertise-mac-address=yes disabled=no hop-limit=unspecified interface=all mtu=unspecified ra-delay=3s ra-interval=3m20s-10m ra-lifetime=\
   30m reachable-time=unspecified retransmit-interval=unspecified
/ipv6 nd prefix default
set autoconfig=yes on-link=yes preferred-lifetime=1w valid-lifetime=4w2d
/ppp aaa
set accounting=yes interim-update=0s use-radius=no
/queue interface
set inet1 queue=ethernet-default
set inet2 queue=ethernet-default
set local queue=ethernet-default
set ukrtelecom queue=default
set velton queue=default
/radius incoming
set accept=no port=3799
/routing mme
set bidirectional-timeout=2 gateway-class=none gateway-keepalive=1m gateway-selection=no-gateway origination-interval=5s preferred-gateway=0.0.0.0 timeout=1m \
   ttl=50
/routing rip
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
   redistribute-connected=no redistribute-ospf=no redistribute-static=no timeout-timer=3m update-timer=30s
/routing ripng
set distribute-default=never garbage-timer=2m metric-bgp=1 metric-connected=1 metric-default=1 metric-ospf=1 metric-static=1 redistribute-bgp=no \
   redistribute-connected=no redistribute-ospf=no redistribute-static=no timeout-timer=3m update-timer=30s
/store
add comment="" disabled=no disk=primary-master name=user-manager1 type=user-manager
add comment="" disabled=no disk=primary-master name=web-proxy1 type=web-proxy
/system clock manual
set dst-delta=+00:00 dst-end="jan/01/1970 00:00:00" dst-start="jan/01/1970 00:00:00" time-zone=+00:00
/system console
add disabled=no port=serial0 term=vt102
set [ find vcno=1 ] disabled=no term=linux
set [ find vcno=2 ] disabled=no term=linux
set [ find vcno=3 ] disabled=no term=linux
set [ find vcno=4 ] disabled=no term=linux
set [ find vcno=5 ] disabled=no term=linux
set [ find vcno=6 ] disabled=no term=linux
set [ find vcno=7 ] disabled=no term=linux
set [ find vcno=8 ] disabled=no term=linux
/system console screen
set line-count=25
/system gps
set enabled=no set-system-time=yes
/system hardware
set multi-cpu=yes
/system health
set state-after-reboot=enabled
/system identity
set name=ISA
/system lcd
set contrast=0 enabled=no port=parallel type=24x4
/system lcd page
set time disabled=yes display-time=5s
set resources disabled=yes display-time=5s
set uptime disabled=yes display-time=5s
set packets disabled=yes display-time=5s
set bits disabled=yes display-time=5s
set version disabled=yes display-time=5s
set ukrtelecom disabled=yes display-time=5s
set velton disabled=yes display-time=5s
set inet1 disabled=yes display-time=5s
set inet2 disabled=yes display-time=5s
set local disabled=yes display-time=5s
/system logging
add action=memory disabled=no prefix="" topics=info
add action=memory disabled=no prefix="" topics=error
add action=memory disabled=no prefix="" topics=warning
add action=echo disabled=no prefix="" topics=critical
/system note
set note="" show-at-login=yes
/system ntp client
set enabled=no mode=unicast primary-ntp=0.0.0.0 secondary-ntp=0.0.0.0
/system ntp server
set broadcast=no enabled=no manycast=yes multicast=no
/system routerboard bios
set
/system upgrade mirror
set check-interval=1d enabled=no primary-server=0.0.0.0 secondary-server=0.0.0.0 user=""
/system watchdog
set auto-send-supout=no automatic-supout=yes no-ping-delay=5m watch-address=none watchdog-timer=yes
/tool bandwidth-server
set allocate-udp-ports-from=2000 authenticate=yes enabled=yes max-sessions=10
/tool e-mail
set from=<> password="" server=0.0.0.0:25 username=""
/tool graphing
set store-every=5min
/tool mac-server
add disabled=no interface=all
/tool mac-server ping
set enabled=yes
/tool sniffer
set file-limit=10 file-name="" filter-address1=0.0.0.0/0:0-65535 filter-address2=0.0.0.0/0:0-65535 filter-protocol=ip-only filter-stream=yes interface=all \
   memory-limit=10 only-headers=no streaming-enabled=no streaming-server=0.0.0.0
/tool user-manager customer
add comment="" disabled=no login=admin parent=admin password="" paypal-accept-pending=no paypal-allowed=no paypal-secure-response=no permissions=owner \
   signup-allowed=no subscriber=admin time-zone=+00:00
/user aaa
set accounting=yes default-group=read interim-update=0s use-radius=no
/xen global-settings
set memory-for-main=unlimited