SNMP и OLT Dasan

[Andrey75 0]

есть OLT Dasan вот отсюда https://shop.nag.ru/catalog/03903.GPON--GEPON/11770.SNR/09352.SNR-OLT-4x-8GC

 

помогите с настройкой Понизатора.

 

в первоисточниках Dasana сказано(оригинал во вложении):

               7.1.1       SNMP Community

                           Only an authorized person can access SNMP agent by configuring SNMP community
                           with a community name and additional information.

                           To configure SNMP community to allow an authorized person to access, use the following
                           command.

                                         Command                     Mode                             Description

                             snmp community {ro | rw}                            Creates SNMP community.

                             COMMUNITY [A.B.C.D] [OID]                           COMMUNITY: community name
                                                                     Global
                             no snmp community {ro | rw}
                                                                                 Deletes created community.
                             COMMUNITY

                           You can configure up to 3 SNMP communities for each read-only and read-write.
                   i

114

----------------------- Page 115-----------------------

User Manual                                                                                                                                 UMN:CLI
SNR-OLT-4X-8GC

                               To display configured SNMP community, use the following command.

                                             Command                          Mode                                Description

                                                                             Enable

                                show snmp community                          Global        Shows created SNMP community.

                                                                             Bridge

                               The following is an example of creating 2 SNMP communities.

                                    SWITCH(config)# snmp community ro public

                                    SWITCH(config)# snmp community rw private
                                    SWITCH(config)# show snmp community

                                    Community List

                                    Type Community                    Source                     OID

                                    -----------------------------------------------

                                    ro      public
                                    rw      private

                                    SWITCH(config)#

 

не могу найти "5. Добавляем в crontab -e соответствующий вызов RemoteAPI."

сильно не пинайте или укажите на букварь

 

User manual SNR-OLT-4x-8GC.pdf