Перейти до

freeradius 2 и rlm_perl на linux

ageNT_666

Автор: ageNT_666,
в Софт

 Share Подписчики 0

Рекомендованные сообщения

ageNT_666

ageNT_666 4

Опубликовано:
Опубликовано:

Помогите завязать Freeradius 2 и rlm_perl

Делал по описанию http://abills.net.ua/wiki/doku.php/abills:docs:rlm_perl:ru не завелось выдает ошибку при старте Freeradius

 

freeradius: symbol lookup error: /usr/lib/perl/5.10/auto/Cwd/Cwd.so: undefined symbol: Perl_Gthr_key_ptr

Ссылка на сообщение
Поделиться на других сайтах
  • 1 month later...
ageNT_666

ageNT_666 4

Опубліковано:
  • Автор
Опубліковано:

Завязал, но возникла проблема в мониторинге не отображаются пользователи, когда возвращаю на exec всё нормально! Где баг?

 

ЗЫ биллинг - abills 0.52b

Ссылка на сообщение
Поделиться на других сайтах
spaul

spaul 69

Опубліковано:
Опубліковано:

Помогите завязать Freeradius 2 и rlm_perl

Делал по описанию http://abills.net.ua/wiki/doku.php/abills:docs:rlm_perl:ru не завелось выдает ошибку при старте Freeradius

 

freeradius: symbol lookup error: /usr/lib/perl/5.10/auto/Cwd/Cwd.so: undefined symbol: Perl_Gthr_key_ptr

 

Запускай так:

LD_PRELOAD=/usr/lib/libperl.so.5.10.0 freeradius

 

Чтобы запускалось с init.d подредактируй скрипт запуска к примерно такому виду

 

...

case "$1" in
       start)
               log_daemon_msg "Starting $DESCR" "$PROG"
               LD_PRELOAD=/usr/lib/libperl.so.5.10.0 start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $PROGRAM || ret=$?
               log_end_msg $ret
               exit $ret
               ;;

...

Ссылка на сообщение
Поделиться на других сайтах
spaul

spaul 69

Опубліковано:
Опубліковано:

Завязал, но возникла проблема в мониторинге не отображаются пользователи, когда возвращаю на exec всё нормально! Где баг?

 

ЗЫ биллинг - abills 5.2b

 

Запусти freeradius -X и покажи что будет писать...

Ссылка на сообщение
Поделиться на других сайтах
ageNT_666

ageNT_666 4

Опубліковано:
  • Автор
Опубліковано:

Запускай так:

LD_PRELOAD=/usr/lib/libperl.so.5.10.0 freeradius

 

Чтобы запускалось с init.d подредактируй скрипт запуска к примерно такому виду

 

...

case "$1" in
       start)
               log_daemon_msg "Starting $DESCR" "$PROG"
               LD_PRELOAD=/usr/lib/libperl.so.5.10.0 start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $PROGRAM || ret=$?
               log_end_msg $ret
               exit $ret
               ;;

...

 

Это я сделал, запускается вродибы нормально, юзеры конектятся но в мониторинге не отображаются

 

FreeRADIUS Version 2.1.0, for host i486-pc-linux-gnu, built on Sep 17 2009 at 17:22:02
Copyright (C) 1999-2008 The FreeRADIUS server project and contributors.
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE.
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License v2.
Starting - reading configuration files ...
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/modules/
including configuration file /etc/freeradius/modules/sradutmp
including configuration file /etc/freeradius/modules/acct_unique
including configuration file /etc/freeradius/modules/realm
including configuration file /etc/freeradius/modules/attr_rewrite
including configuration file /etc/freeradius/modules/pam
including configuration file /etc/freeradius/modules/passwd
including configuration file /etc/freeradius/modules/expr
including configuration file /etc/freeradius/modules/mac2ip
including configuration file /etc/freeradius/modules/ldap
including configuration file /etc/freeradius/modules/pap
including configuration file /etc/freeradius/modules/krb5
including configuration file /etc/freeradius/modules/always
including configuration file /etc/freeradius/modules/smbpasswd
including configuration file /etc/freeradius/modules/wimax
including configuration file /etc/freeradius/modules/ippool
including configuration file /etc/freeradius/modules/counter
including configuration file /etc/freeradius/modules/attr_filter
including configuration file /etc/freeradius/modules/sql_log
including configuration file /etc/freeradius/modules/exec
including configuration file /etc/freeradius/modules/mschap
including configuration file /etc/freeradius/modules/etc_group
including configuration file /etc/freeradius/modules/preprocess
including configuration file /etc/freeradius/modules/echo
including configuration file /etc/freeradius/modules/files
including configuration file /etc/freeradius/modules/detail.example.com
including configuration file /etc/freeradius/modules/policy
including configuration file /etc/freeradius/modules/radutmp
including configuration file /etc/freeradius/modules/inner-eap
including configuration file /etc/freeradius/modules/mac2vlan
including configuration file /etc/freeradius/modules/unix
including configuration file /etc/freeradius/modules/linelog
including configuration file /etc/freeradius/modules/detail
including configuration file /etc/freeradius/modules/chap
including configuration file /etc/freeradius/modules/detail.log
including configuration file /etc/freeradius/modules/checkval
including configuration file /etc/freeradius/modules/digest
including configuration file /etc/freeradius/modules/logintime
including configuration file /etc/freeradius/modules/expiration
including configuration file /etc/freeradius/eap.conf
including configuration file /etc/freeradius/policy.conf
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
including dictionary file /etc/freeradius/dictionary
main {
       prefix = "/usr"
       localstatedir = "/var"
       logdir = "/var/log/freeradius"
       libdir = "/usr/lib/freeradius"
       radacctdir = "/var/log/freeradius/radacct"
       hostname_lookups = no
       max_request_time = 30
       cleanup_delay = 5
       max_requests = 1024
       allow_core_dumps = no
       pidfile = "/var/run/freeradius/freeradius.pid"
       checkrad = "/usr/sbin/checkrad"
       debug_level = 0
       proxy_requests = yes
log {
       stripped_names = no
       auth = no
       auth_badpass = no
       auth_goodpass = no
}
security {
       max_attributes = 200
       reject_delay = 1
       status_server = yes
}
}
client localhost {
       ipaddr = 127.0.0.1
       require_message_authenticator = no
       secret = "testing123"
       nastype = "other"
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
       retry_delay = 5
       retry_count = 3
       default_fallback = no
       dead_time = 120
       wake_all_if_all_dead = no
}
home_server localhost {
       ipaddr = 127.0.0.1
       port = 1812
       type = "auth"
       secret = "testing123"
       response_window = 20
       max_outstanding = 65536
       zombie_period = 40
       status_check = "status-server"
       ping_interval = 30
       check_interval = 30
       num_answers_to_alive = 3
       num_pings_to_alive = 3
       revive_interval = 120
       status_check_timeout = 4
}
home_server_pool my_auth_failover {
       type = fail-over
       home_server = localhost
}
realm example.com {
       auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Instantiating modules ####
instantiate {
Module: Linked to module rlm_exec
Module: Instantiating exec
 exec {
       wait = yes
       input_pairs = "request"
       output_pairs = "reply"
       shell_escape = yes
 }
Module: Linked to module rlm_expr
Module: Instantiating expr
Module: Linked to module rlm_expiration
Module: Instantiating expiration
 expiration {
       reply-message = "Password Has Expired  "
 }
Module: Linked to module rlm_logintime
Module: Instantiating logintime
 logintime {
       reply-message = "You are calling outside your allowed timespan  "
       minimum-timeout = 60
 }
}
radiusd: #### Loading Virtual Servers ####
server inner-tunnel {
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_pap
Module: Instantiating pap
 pap {
       encryption_scheme = "auto"
       auto_header = no
 }
Module: Linked to module rlm_chap
Module: Instantiating chap
Module: Linked to module rlm_mschap
Module: Instantiating mschap
 mschap {
       use_mppe = yes
       require_encryption = no
       require_strong = no
       with_ntdomain_hack = no
 }
Module: Linked to module rlm_unix
Module: Instantiating unix
 unix {
       radwtmp = "/var/log/freeradius/radwtmp"
 }
Module: Linked to module rlm_eap
Module: Instantiating eap
 eap {
       default_eap_type = "md5"
       timer_expire = 60
       ignore_unknown_eap_types = no
       cisco_accounting_username_bug = no
       max_sessions = 2048
 }
Module: Linked to sub-module rlm_eap_md5
Module: Instantiating eap-md5
Module: Linked to sub-module rlm_eap_leap
Module: Instantiating eap-leap
Module: Linked to sub-module rlm_eap_gtc
Module: Instantiating eap-gtc
  gtc {
       challenge = "Password: "
       auth_type = "PAP"
  }
Ignoring EAP-Type/tls because we do not have OpenSSL support.
Ignoring EAP-Type/ttls because we do not have OpenSSL support.
Ignoring EAP-Type/peap because we do not have OpenSSL support.
Module: Linked to sub-module rlm_eap_mschapv2
Module: Instantiating eap-mschapv2
  mschapv2 {
       with_ntdomain_hack = no
  }
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_realm
Module: Instantiating suffix
 realm suffix {
       format = "suffix"
       delimiter = "@"
       ignore_default = no
       ignore_null = no
 }
Module: Linked to module rlm_files
Module: Instantiating files
 files {
       usersfile = "/etc/freeradius/users"
       acctusersfile = "/etc/freeradius/acct_users"
       preproxy_usersfile = "/etc/freeradius/preproxy_users"
       compat = "no"
 }
Module: Checking session {...} for more modules to load
Module: Linked to module rlm_radutmp
Module: Instantiating radutmp
 radutmp {
       filename = "/var/log/freeradius/radutmp"
       username = "%{User-Name}"
       case_sensitive = yes
       check_with_nas = yes
       perm = 384
       callerid = yes
 }
Module: Checking post-proxy {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
Module: Linked to module rlm_attr_filter
Module: Instantiating attr_filter.access_reject
 attr_filter attr_filter.access_reject {
       attrsfile = "/etc/freeradius/attrs.access_reject"
       key = "%{User-Name}"
 }
}
}
modules {
Module: Checking authenticate {...} for more modules to load
Module: Linked to module rlm_perl
Module: Instantiating perl
 perl {
       module = "/usr/abills/libexec/rlm_perl.pl"
       func_authorize = "authorize"
       func_authenticate = "authenticate"
       func_accounting = "accounting"
       func_preacct = "preacct"
       func_checksimul = "checksimul"
       func_detach = "detach"
       func_xlat = "xlat"
       func_pre_proxy = "pre_proxy"
       func_post_proxy = "post_proxy"
       func_post_auth = "post_auth"
 }
 perl {
       max_clones = 32
       start_clones = 32
       min_spare_clones = 0
       max_spare_clones = 32
       cleanup_delay = 5
       max_request_per_clone = 0
 }
Module: Checking authorize {...} for more modules to load
Module: Linked to module rlm_preprocess
Module: Instantiating preprocess
 preprocess {
       huntgroups = "/etc/freeradius/huntgroups"
       hints = "/etc/freeradius/hints"
       with_ascend_hack = no
       ascend_channels_per_line = 23
       with_ntdomain_hack = no
       with_specialix_jetstream_hack = no
       with_cisco_vsa_hack = no
       with_alvarion_vsa_hack = no
 }
Module: Checking preacct {...} for more modules to load
Module: Checking accounting {...} for more modules to load
Module: Checking post-auth {...} for more modules to load
}
radiusd: #### Opening IP addresses and Ports ####
listen {
       type = "auth"
       ipaddr = *
       port = 0
}
listen {
       type = "acct"
       ipaddr = *
       port = 0
}
Listening on authentication address * port 1812
Listening on accounting address * port 1813
Listening on proxy address * port 1814
Ready to process requests.
rad_recv: Access-Request packet from host 127.0.0.1 port 33115, id=113, length=107
       Service-Type = Framed-User
       Framed-Protocol = PPP
       User-Name = "test"
       CHAP-Challenge = 0xca07fa2cca02fe5bfae24bfa6f7f5c91645d8a
       CHAP-Password = 0x66d770864b1ae903e2a9abac48db8d028f
       Calling-Station-Id = "178.133.164.154"
       NAS-IP-Address = 127.0.0.1
       NAS-Port = 1
+- entering group authorize {...}
++[preprocess] returns ok
perl_pool: item 0x9ce7038 asigned new request. Handled so far: 1
found interpetator at address 0x9ce7038
rlm_perl: Added pair CHAP-Password = 0x66d770864b1ae903e2a9abac48db8d028f
rlm_perl: Added pair Service-Type = Framed-User
rlm_perl: Added pair Calling-Station-Id = 178.133.164.154
rlm_perl: Added pair Framed-Protocol = PPP
rlm_perl: Added pair User-Name = test
rlm_perl: Added pair CHAP-Challenge = 0xca07fa2cca02fe5bfae24bfa6f7f5c91645d8a
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair NAS-Port = 1
rlm_perl: Added pair Acct-Interim-Interval = 60
rlm_perl: Added pair Session-Timeout = 1656551
rlm_perl: Added pair PPPD-Upstream-Speed-Limit = 128
rlm_perl: Added pair Octets-Direction = 0
rlm_perl: Added pair Framed-IP-Address = 172.16.3.143
rlm_perl: Added pair Session-Octets-Limit = 0
rlm_perl: Added pair Framed-IP-Netmask = 255.255.255.255
rlm_perl: Added pair PPPD-Downstream-Speed-Limit = 128
rlm_perl: Added pair Auth-Type = Accept
perl_pool total/active/spare [32/0/32]
Unreserve perl at address 0x9ce7038
++[perl] returns ok
++[mschap] returns noop
Found Auth-Type = Accept
Auth-Type = Accept, accepting the user
Sending Access-Accept of id 113 to 127.0.0.1 port 33115
       Acct-Interim-Interval = 60
       Session-Timeout = 1656551
       PPPD-Upstream-Speed-Limit = 128
       Octets-Direction = Route-IP-No
       Framed-IP-Address = 172.16.3.143
       Session-Octets-Limit = 0
       Framed-IP-Netmask = 255.255.255.255
       PPPD-Downstream-Speed-Limit = 128
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Accounting-Request packet from host 127.0.0.1 port 41139, id=114, length=113
       Acct-Session-Id = "4D050B7B2A7E00"
       User-Name = "test"
       Acct-Status-Type = Start
       Service-Type = Framed-User
       Framed-Protocol = PPP
       Calling-Station-Id = "178.133.164.154"
       Acct-Authentic = RADIUS
       NAS-Port-Type = Async
       Framed-IP-Address = 172.16.3.143
       NAS-IP-Address = 127.0.0.1
       NAS-Port = 1
       Acct-Delay-Time = 0
+- entering group preacct {...}
++[preprocess] returns ok
perl_pool: item 0xa29e068 asigned new request. Handled so far: 1
found interpetator at address 0xa29e068
rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31.
rlm_perl: Added pair NAS-Port-Type = Async
rlm_perl: Added pair Acct-Session-Id = 4D050B7B2A7E00
rlm_perl: Added pair Service-Type = Framed-User
rlm_perl: Added pair Calling-Station-Id = 178.133.164.154
rlm_perl: Added pair Framed-Protocol = PPP
rlm_perl: Added pair User-Name = test
rlm_perl: Added pair Acct-Authentic = RADIUS
rlm_perl: Added pair Acct-Status-Type = Start
rlm_perl: Added pair Framed-IP-Address = 172.16.3.143
rlm_perl: Added pair NAS-Port = 1
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Acct-Delay-Time = 0
perl_pool total/active/spare [32/0/32]
Unreserve perl at address 0xa29e068
++[perl] returns reject
Finished request 1.
Cleaning up request 1 ID 114 with timestamp +18
Going to the next request
Waking up in 3.3 seconds.
Cleaning up request 0 ID 113 with timestamp +16
Ready to process requests.
rad_recv: Accounting-Request packet from host 127.0.0.1 port 41139, id=114, length=113
       Acct-Session-Id = "4D050B7B2A7E00"
       User-Name = "test"
       Acct-Status-Type = Start
       Service-Type = Framed-User
       Framed-Protocol = PPP
       Calling-Station-Id = "178.133.164.154"
       Acct-Authentic = RADIUS
       NAS-Port-Type = Async
       Framed-IP-Address = 172.16.3.143
       NAS-IP-Address = 127.0.0.1
       NAS-Port = 1
       Acct-Delay-Time = 0
+- entering group preacct {...}
++[preprocess] returns ok
perl_pool: item 0xa464af0 asigned new request. Handled so far: 1
found interpetator at address 0xa464af0
rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31.
rlm_perl: Added pair NAS-Port-Type = Async
rlm_perl: Added pair Acct-Session-Id = 4D050B7B2A7E00
rlm_perl: Added pair Service-Type = Framed-User
rlm_perl: Added pair Calling-Station-Id = 178.133.164.154
rlm_perl: Added pair Framed-Protocol = PPP
rlm_perl: Added pair User-Name = test
rlm_perl: Added pair Acct-Authentic = RADIUS
rlm_perl: Added pair Acct-Status-Type = Start
rlm_perl: Added pair Framed-IP-Address = 172.16.3.143
rlm_perl: Added pair NAS-Port = 1
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Acct-Delay-Time = 0
perl_pool total/active/spare [32/0/32]
Unreserve perl at address 0xa464af0
++[perl] returns reject
Finished request 2.
Cleaning up request 2 ID 114 with timestamp +28
Going to the next request
Ready to process requests.
rad_recv: Accounting-Request packet from host 127.0.0.1 port 41139, id=114, length=113
       Acct-Session-Id = "4D050B7B2A7E00"
       User-Name = "test"
       Acct-Status-Type = Start
       Service-Type = Framed-User
       Framed-Protocol = PPP
       Calling-Station-Id = "178.133.164.154"
       Acct-Authentic = RADIUS
       NAS-Port-Type = Async
       Framed-IP-Address = 172.16.3.143
       NAS-IP-Address = 127.0.0.1
       NAS-Port = 1
       Acct-Delay-Time = 0
+- entering group preacct {...}
++[preprocess] returns ok
perl_pool: item 0xa6fb8a8 asigned new request. Handled so far: 1
found interpetator at address 0xa6fb8a8
rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31.
rlm_perl: Added pair NAS-Port-Type = Async
rlm_perl: Added pair Acct-Session-Id = 4D050B7B2A7E00
rlm_perl: Added pair Service-Type = Framed-User
rlm_perl: Added pair Calling-Station-Id = 178.133.164.154
rlm_perl: Added pair Framed-Protocol = PPP
rlm_perl: Added pair User-Name = test
rlm_perl: Added pair Acct-Authentic = RADIUS
rlm_perl: Added pair Acct-Status-Type = Start
rlm_perl: Added pair Framed-IP-Address = 172.16.3.143
rlm_perl: Added pair NAS-Port = 1
rlm_perl: Added pair NAS-IP-Address = 127.0.0.1
rlm_perl: Added pair Acct-Delay-Time = 0
perl_pool total/active/spare [32/0/32]
Unreserve perl at address 0xa6fb8a8
++[perl] returns reject
Finished request 3.
Cleaning up request 3 ID 114 with timestamp +38
Going to the next request
Ready to process requests.

 

Меня смущает вот это "rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = preacct exit status= Undefined subroutine &main::preacct called at /usr/abills/libexec/rlm_perl.pl line 31."

Ссылка на сообщение
Поделиться на других сайтах
spaul

spaul 69

Опубліковано:
Опубліковано: (відредаговано)

Ошибка, которая вас смущает скорее всего и есть причиной.

 

Покажите конфиг /etc/freeradius/sites-enabled/default

/etc/freeradius/sites-enabled/inner-tunnel

 

Попробуем сначала поправить ваши конфиги, если не получится скину рабочие конфиги.

Відредаговано spaul
Ссылка на сообщение
Поделиться на других сайтах
ageNT_666

ageNT_666 4

Опубліковано:
  • Автор
Опубліковано:

Ошибка, которая вас смущает скорее всего и есть причиной.

 

Покажите конфиг /etc/freeradius/sites-enabled/default

/etc/freeradius/sites-enabled/inner-tunnel

 

Попробуем сначала поправить ваши конфиги, если не получится скину рабочие конфиги.

 

/etc/freeradius/sites-enabled/default

authorize {
preprocess
perl
#abills_preauth
mschap
#files
#abills_auth
}

preacct {
preprocess
#abills_acc
perl
}

#post-auth {
#Post-Auth-Type REJECT {
#abills_postauth
#}
#}

post-auth {
Post-Auth-Type REJECT {
perl
}
}

authenticate {
Auth-Type PAP {
pap
perl
}

Auth-Type CHAP {
chap
}

Auth-Type MS-CHAP {
mschap
}

unix
eap
}

accounting {
unix
radutmp
perl
}

 

/etc/freeradius/sites-enabled/inner-tunnel я его не трогал, там всё по дефолту

Ссылка на сообщение
Поделиться на других сайтах
  • 1 year later...
  • 4 weeks later...
sergkryk

sergkryk 0

Опубліковано:
Опубліковано:

Помогите и мне с рабочим конфигом если не сложно. Намучался уже.

 

freeradius -X

 

 

FreeRADIUS Version 2.1.10, for host x86_64-pc-linux-gnu, built on May 19 2011 at 15:50:11

Copyright © 1999-2009 The FreeRADIUS server project and contributors.

There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A

PARTICULAR PURPOSE.

You may redistribute copies of FreeRADIUS under the terms of the

GNU General Public License v2.

Starting - reading configuration files ...

including configuration file /etc/freeradius/radiusd.conf

including configuration file /etc/freeradius/proxy.conf

including configuration file /etc/freeradius/clients.conf

including files in directory /etc/freeradius/modules/

including configuration file /etc/freeradius/modules/mac2ip

including configuration file /etc/freeradius/modules/radutmp

including configuration file /etc/freeradius/modules/smsotp

including configuration file /etc/freeradius/modules/passwd

including configuration file /etc/freeradius/modules/exec

including configuration file /etc/freeradius/modules/ippool

including configuration file /etc/freeradius/modules/files

including configuration file /etc/freeradius/modules/inner-eap

including configuration file /etc/freeradius/modules/perl

including configuration file /etc/freeradius/modules/linelog

including configuration file /etc/freeradius/modules/sradutmp

including configuration file /etc/freeradius/modules/acct_unique

including configuration file /etc/freeradius/modules/smbpasswd

including configuration file /etc/freeradius/modules/policy

including configuration file /etc/freeradius/modules/ntlm_auth

including configuration file /etc/freeradius/modules/checkval

including configuration file /etc/freeradius/modules/sqlcounter_expire_on_login

including configuration file /etc/freeradius/modules/chap

including configuration file /etc/freeradius/modules/opendirectory

including configuration file /etc/freeradius/modules/ldap

including configuration file /etc/freeradius/modules/cui

including configuration file /etc/freeradius/modules/detail.log

including configuration file /etc/freeradius/modules/mschap

including configuration file /etc/freeradius/modules/counter

including configuration file /etc/freeradius/modules/unix

including configuration file /etc/freeradius/modules/pam

including configuration file /etc/freeradius/modules/detail

including configuration file /etc/freeradius/modules/krb5

including configuration file /etc/freeradius/modules/expiration

including configuration file /etc/freeradius/modules/otp

including configuration file /etc/freeradius/modules/always

including configuration file /etc/freeradius/modules/dynamic_clients

including configuration file /etc/freeradius/modules/detail.example.com

including configuration file /etc/freeradius/modules/expr

including configuration file /etc/freeradius/modules/logintime

including configuration file /etc/freeradius/modules/echo

including configuration file /etc/freeradius/modules/realm

including configuration file /etc/freeradius/modules/sql_log

including configuration file /etc/freeradius/modules/digest

including configuration file /etc/freeradius/modules/pap

including configuration file /etc/freeradius/modules/wimax

including configuration file /etc/freeradius/modules/attr_filter

including configuration file /etc/freeradius/modules/mac2vlan

including configuration file /etc/freeradius/modules/preprocess

including configuration file /etc/freeradius/modules/etc_group

including configuration file /etc/freeradius/modules/attr_rewrite

including configuration file /etc/freeradius/eap.conf

including configuration file /etc/freeradius/policy.conf

including files in directory /etc/freeradius/sites-enabled/

including configuration file /etc/freeradius/sites-enabled/default.default

including configuration file /etc/freeradius/sites-enabled/inner-tunnel

including configuration file /etc/freeradius/sites-enabled/default

main {

user = "freerad"

group = "freerad"

allow_core_dumps = no

}

including dictionary file /etc/freeradius/dictionary

main {

prefix = "/usr"

localstatedir = "/var"

logdir = "/var/log/freeradius"

libdir = "/usr/lib/freeradius"

radacctdir = "/var/log/freeradius/radacct"

hostname_lookups = no

max_request_time = 30

cleanup_delay = 5

max_requests = 1024

pidfile = "/var/run/freeradius/freeradius.pid"

checkrad = "/usr/sbin/checkrad"

debug_level = 0

proxy_requests = yes

log {

stripped_names = no

auth = no

auth_badpass = no

auth_goodpass = no

}

security {

max_attributes = 200

reject_delay = 1

status_server = yes

}

}

radiusd: #### Loading Realms and Home Servers ####

proxy server {

retry_delay = 5

retry_count = 3

default_fallback = no

dead_time = 120

wake_all_if_all_dead = no

}

home_server localhost {

ipaddr = 127.0.0.1

port = 1812

type = "auth"

secret = "testing123"

response_window = 20

max_outstanding = 65536

require_message_authenticator = yes

zombie_period = 40

status_check = "status-server"

ping_interval = 30

check_interval = 30

num_answers_to_alive = 3

num_pings_to_alive = 3

revive_interval = 120

status_check_timeout = 4

irt = 2

mrt = 16

mrc = 5

mrd = 30

}

home_server_pool my_auth_failover {

type = fail-over

home_server = localhost

}

realm example.com {

auth_pool = my_auth_failover

}

realm LOCAL {

}

radiusd: #### Loading Clients ####

client localhost {

ipaddr = 127.0.0.1

require_message_authenticator = no

secret = "radsecret"

shortname = "shortname"

}

radiusd: #### Instantiating modules ####

instantiate {

Module: Linked to module rlm_exec

Module: Instantiating module "exec" from file /etc/freeradius/modules/exec

exec {

wait = yes

input_pairs = "request"

output_pairs = "reply"

shell_escape = yes

}

Module: Linked to module rlm_expr

Module: Instantiating module "expr" from file /etc/freeradius/modules/expr

Module: Linked to module rlm_expiration

Module: Instantiating module "expiration" from file /etc/freeradius/modules/expiration

expiration {

reply-message = "Password Has Expired "

}

Module: Linked to module rlm_logintime

Module: Instantiating module "logintime" from file /etc/freeradius/modules/logintime

logintime {

reply-message = "You are calling outside your allowed timespan "

minimum-timeout = 60

}

}

radiusd: #### Loading Virtual Servers ####

server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel

modules {

Module: Checking authenticate {...} for more modules to load

Module: Linked to module rlm_pap

Module: Instantiating module "pap" from file /etc/freeradius/modules/pap

pap {

encryption_scheme = "auto"

auto_header = no

}

Module: Linked to module rlm_chap

Module: Instantiating module "chap" from file /etc/freeradius/modules/chap

Module: Linked to module rlm_mschap

Module: Instantiating module "mschap" from file /etc/freeradius/modules/mschap

mschap {

use_mppe = yes

require_encryption = no

require_strong = no

with_ntdomain_hack = no

}

Module: Linked to module rlm_unix

Module: Instantiating module "unix" from file /etc/freeradius/modules/unix

unix {

radwtmp = "/var/log/freeradius/radwtmp"

}

Module: Linked to module rlm_eap

Module: Instantiating module "eap" from file /etc/freeradius/eap.conf

eap {

default_eap_type = "md5"

timer_expire = 60

ignore_unknown_eap_types = no

cisco_accounting_username_bug = no

max_sessions = 4096

}

Module: Linked to sub-module rlm_eap_md5

Module: Instantiating eap-md5

Module: Linked to sub-module rlm_eap_leap

Module: Instantiating eap-leap

Module: Linked to sub-module rlm_eap_gtc

Module: Instantiating eap-gtc

gtc {

challenge = "Password: "

auth_type = "PAP"

}

Module: Linked to sub-module rlm_eap_tls

Module: Instantiating eap-tls

tls {

rsa_key_exchange = no

dh_key_exchange = yes

rsa_key_length = 512

dh_key_length = 512

verify_depth = 0

CA_path = "/etc/freeradius/certs"

pem_file_type = yes

private_key_file = "/etc/freeradius/certs/server.key"

certificate_file = "/etc/freeradius/certs/server.pem"

CA_file = "/etc/freeradius/certs/ca.pem"

private_key_password = "whatever"

dh_file = "/etc/freeradius/certs/dh"

random_file = "/dev/urandom"

fragment_size = 1024

include_length = yes

check_crl = no

cipher_list = "DEFAULT"

make_cert_command = "/etc/freeradius/certs/bootstrap"

cache {

enable = no

lifetime = 24

max_entries = 255

}

verify {

}

}

Module: Linked to sub-module rlm_eap_ttls

Module: Instantiating eap-ttls

ttls {

default_eap_type = "md5"

copy_request_to_tunnel = no

use_tunneled_reply = no

virtual_server = "inner-tunnel"

include_length = yes

}

Module: Linked to sub-module rlm_eap_peap

Module: Instantiating eap-peap

peap {

default_eap_type = "mschapv2"

copy_request_to_tunnel = no

use_tunneled_reply = no

proxy_tunneled_request_as_eap = yes

virtual_server = "inner-tunnel"

}

Module: Linked to sub-module rlm_eap_mschapv2

Module: Instantiating eap-mschapv2

mschapv2 {

with_ntdomain_hack = no

}

Module: Checking authorize {...} for more modules to load

Module: Linked to module rlm_realm

Module: Instantiating module "suffix" from file /etc/freeradius/modules/realm

realm suffix {

format = "suffix"

delimiter = "@"

ignore_default = no

ignore_null = no

}

Module: Linked to module rlm_files

Module: Instantiating module "files" from file /etc/freeradius/modules/files

files {

usersfile = "/etc/freeradius/users"

acctusersfile = "/etc/freeradius/acct_users"

preproxy_usersfile = "/etc/freeradius/preproxy_users"

compat = "no"

}

Module: Checking session {...} for more modules to load

Module: Linked to module rlm_radutmp

Module: Instantiating module "radutmp" from file /etc/freeradius/modules/radutmp

radutmp {

filename = "/var/log/freeradius/radutmp"

username = "%{User-Name}"

case_sensitive = yes

check_with_nas = yes

perm = 384

callerid = yes

}

Module: Checking post-proxy {...} for more modules to load

Module: Checking post-auth {...} for more modules to load

Module: Linked to module rlm_attr_filter

Module: Instantiating module "attr_filter.access_reject" from file /etc/freeradius/modules/attr_filter

attr_filter attr_filter.access_reject {

attrsfile = "/etc/freeradius/attrs.access_reject"

key = "%{User-Name}"

}

} # modules

} # server

server { # from file /etc/freeradius/radiusd.conf

modules {

Module: Checking authenticate {...} for more modules to load

Module: Linked to module rlm_perl

Module: Instantiating module "perl" from file /etc/freeradius/radiusd.conf

perl {

module = "/usr/abills/libexec/rlm_perl.pl"

func_authorize = "authorize"

func_authenticate = "authenticate"

func_accounting = "accounting"

func_preacct = "preacct"

func_checksimul = "checksimul"

func_detach = "detach"

func_xlat = "xlat"

func_pre_proxy = "pre_proxy"

func_post_proxy = "post_proxy"

func_post_auth = "post_auth"

func_recv_coa = "recv_coa"

func_send_coa = "send_coa"

}

freeradius: symbol lookup error: /usr/lib/perl/5.12/auto/Cwd/Cwd.so: undefined symbol: Perl_Gthr_key_ptr

Ссылка на сообщение
Поделиться на других сайтах
  • 1 year later...
ajax2002

ajax2002 0

Опубліковано:
Опубліковано:

Ребята!Подскажите что делать?Как завести модуль?

 

radiusd: FreeRADIUS Version 2.2.0, for host i686-pc-linux-gnu, built on Dec 25 2013 at 11:46:25

 

 perl -V | grep USE_I

                        USE_ITHREADS USE_LARGE_FILES USE_LOCALE

 

Summary of my perl5 (revision 5 version 18 subversion 1)

 

пытаюсь запустить радиус с модулем rlm_perl не работает.Выпадает с ошибкой:

radiusd -X

 

Listening on accounting address * port 1813

Ready to process requests.

rad_recv: Access-Request packet from host 127.0.0.1 port 49276, id=114, length=111

        Service-Type = Framed-User

        Framed-Protocol = PPP

        User-Name = "username"

        CHAP-Challenge = 0x28991391dc57bab9e789ee2bb852df823daf

        CHAP-Password = 0x898580788cf65a11aa6b2e7ed36ec01c4d

        Calling-Station-Id = "192.168.111.12"

        NAS-IP-Address = 127.0.1.1

        NAS-Port = 0

# Executing section authorize from file /usr/local/freeradius/etc/raddb/sites-enabled/abills_default

+- entering group authorize {...}

++[preprocess] returns ok

++[mschap] returns noop

[files] users: Matched entry DEFAULT at line 1

++[files] returns ok

rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = authorize exit status= DBD::mysql::db do failed: handle 2 is owned by thread 9474320 not current thread 99fed88 (handles can't be shared between threads and your driver may need a CLONE method added) at /usr/abills/libexec/../Abills/mysql/main.pm line 147.  

Use of uninitialized value in each at /usr/abills/libexec/rlm_perl.pl line 31.

rlm_perl: Added pair NAS-Port = 0

rlm_perl: Added pair NAS-IP-Address = 127.0.1.1

rlm_perl: Added pair Service-Type = Framed-User

rlm_perl: Added pair CHAP-Password = 0x898580788cf65a11aa6b2e7ed36ec01c4d

rlm_perl: Added pair CHAP-Challenge = 0x28991391dc57bab9e789ee2bb852df823daf

rlm_perl: Added pair Framed-Protocol = PPP

rlm_perl: Added pair User-Name = username

rlm_perl: Added pair Calling-Station-Id = 192.168.111.12

rlm_perl: Added pair Auth-Type = Perl

++[perl] returns reject

Using Post-Auth-Type REJECT

# Executing group from file /usr/local/freeradius/etc/raddb/sites-enabled/abills_default

+- entering group REJECT {...}

rlm_perl: perl_embed:: module = /usr/abills/libexec/rlm_perl.pl , func = post_auth exit status= DBD::mysql::db do failed: handle 2 is owned by thread 9474320 not current thread 99fed88 (handles can't be shared between threads and your driver may need a CLONE method added) at /usr/abills/libexec/../Abills/mysql/main.pm line 147.  

Ошибка сегментирования

 

В dmesg сыпит это:

radiusd[9774]: segfault at 211 ip b74aac41 sp bffccca0 error 4 in rlm_perl-2.2.0.so[b74a7000+6000]

 

 

Ссылка на сообщение
Поделиться на других сайтах
ajax2002

ajax2002 0

Опубліковано:
Опубліковано: (відредаговано)

вот статья по шагам как сделать на Ubuntu

 

http://abills.net.ua/wiki/doku.php/abills:docs:manual:install_ubuntu:ru

Так по ней и делалось. :-)

Почему ошибка эта вылазит непонятно,а в доке ничего нет по этому поводу.

Відредаговано ajax2002
Ссылка на сообщение
Поделиться на других сайтах
Ромка

Ромка 567

Опубліковано:
Опубліковано:

 

вот статья по шагам как сделать на Ubuntu

 

http://abills.net.ua/wiki/doku.php/abills:docs:manual:install_ubuntu:ru

Так по ней и делалось. :-)

Почему ошибка эта вылазит непонятно,а в доке ничего нет по этому поводу.

 

Забейте на убунту. По этому мануалу всё прекрасно становится и работает на Debian 7

Ссылка на сообщение
Поделиться на других сайтах
ajax2002

ajax2002 0

Опубліковано:
Опубліковано:

 

 

вот статья по шагам как сделать на Ubuntu

 

http://abills.net.ua/wiki/doku.php/abills:docs:manual:install_ubuntu:ru

Так по ней и делалось. :-)

Почему ошибка эта вылазит непонятно,а в доке ничего нет по этому поводу.

 

Забейте на убунту. По этому мануалу всё прекрасно становится и работает на Debian 7

 

Может быть именно с этой версией радиуса проблема?На Debian 7 я и делаю.

Ссылка на сообщение
Поделиться на других сайтах
ajax2002

ajax2002 0

Опубліковано:
Опубліковано: (відредаговано)

Может попробовать выкинуть из перла USE_ITHREADS ?

Можно!Попробую!Но у меня есть подозрение что действительно возможно старая версия Abills'а виновата.

Відредаговано ajax2002
Ссылка на сообщение
Поделиться на других сайтах

Создайте аккаунт или войдите в него для комментирования

Вы должны быть пользователем, чтобы оставить комментарий

Создать аккаунт

Зарегистрируйтесь для получения аккаунта. Это просто!

Зарегистрировать аккаунт

Вхід

Уже зарегистрированы? Войдите здесь.

Войти сейчас
 Share
Подписчики 0
Перейти до переліку тем

  • Зараз на сторінці   0 користувачів

    Немає користувачів, що переглядають цю сторінку.

×
×
  • Створити нове...