Jump to content
Local
Archy_k

Letsencrypt ошибка обновления SSL

Recommended Posts

Всем привет.

Столкнулся с проблемой: не обновился сертификат SSL.

Попробовал вручную запустить скрипт:

# /etc/letsencrypt/certbot/certbot-auto renew
Creating virtual environment...
Installing Python packages...
/opt/eff.org/certbot/venv/bin/python: No module named pip.__main__; 'pip' is a package and cannot be directly executed
Traceback (most recent call last):
  File "/tmp/tmp.qUAUXX5FHZ/pipstrap.py", line 177, in <module>
    sys.exit(main())
  File "/tmp/tmp.qUAUXX5FHZ/pipstrap.py", line 149, in main
    pip_version = StrictVersion(check_output([python, '-m', 'pip', '--version'])
  File "/usr/lib/python2.7/subprocess.py", line 544, in check_output
    raise CalledProcessError(retcode, cmd, output=output)
subprocess.CalledProcessError: Command '['/opt/eff.org/certbot/venv/bin/python', '-m', 'pip', '--version']' returned non-zero exit status 1

И вот какой ответ получаю.

Подскажите пожалуйста, как с этим справиться...

Сервер с Debian и nginx

Заранее спасибо.

Edited by Archy_k

Share this post


Link to post
Share on other sites
38 минут назад, skybetik сказал:

 

Читал я эту тему, но вот что мне не понятно...

у меня 2 домена, 1 обновил свой ssl, второй - нет.

Мне переустанавливать certbot как с нуля?

Или может быть нужно что-то подправить в конфигах где-то?

Share this post


Link to post
Share on other sites
28 минут назад, Archy_k сказал:

Читал я эту тему, но вот что мне не понятно...

у меня 2 домена, 1 обновил свой ssl, второй - нет.

Мне переустанавливать certbot как с нуля?

Или может быть нужно что-то подправить в конфигах где-то?

Думаю стоит подождать.

Share this post


Link to post
Share on other sites
1 час назад, Archy_k сказал:

Сервер с Debian и nginx

 

Уточните версию дебиан. Если что - под 7ку он уже перестал поддерживаться недавно.

Share this post


Link to post
Share on other sites
4 часа назад, Archy_k сказал:

Читал я эту тему, но вот что мне не понятно...

Купите платный сертификат, не так уж и дорого. Ну или наймите админа, который все это порешает )

Share this post


Link to post
Share on other sites
5 hours ago, Archy_k said:

Всем привет.

Столкнулся с проблемой: не обновился сертификат SSL.Попробовал вручную запустить скрипт:И вот какой ответ получаю.

Подскажите пожалуйста, как с этим справиться...

Сервер с Debian и nginx

Заранее спасибо.

 

Обновляйте Debian. EOL уже не будут чинить.  Советуют еще откатиться на старую версию цертбота, и не обновлять его. Но как по мне - это морока.

 

Share this post


Link to post
Share on other sites
13 hours ago, Archy_k said:

Installing Python packages...

/opt/eff.org/certbot/venv/bin/python: No module named pip.__main__; 'pip' is a package and cannot be directly executed

....

subprocess.CalledProcessError: Command '['/opt/eff.org/certbot/venv/bin/python', '-m', 'pip', '--version']' returned non-zero exit status 1

судя по логу у вас в env python бота проблема с pip

Edited by John_Doe

Share this post


Link to post
Share on other sites
6 часов назад, John_Doe сказал:

судя по логу у вас в env python бота проблема с pip

может Вы знаете как это решить? подскажите пожалуйста

58 минут назад, Kto To сказал:

certbot решил проблему - все создалось гуд :)

у меня не создается... 

У вас такая же проблема была или что-то по другому?

Share this post


Link to post
Share on other sites
8 часов назад, vop сказал:

Или вот так советуют:

 

Уважаемый коллега! Спасибо Вам огромное!

Так получилось, обновилось, работает!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By LENS
      Приветствую!
      Не загружается Juniper MX80, в консоли нет никакого вывода.
      Крутятся вентиляторы и горят две лампочки над портами синхронизации.
      Больше никаких лампочек не горит, порты не поднимаются, RE лампочки не светятся.
       
      Нажимал  RESET - не помогло.
       
      Куда обращаться за ремонтом?
       
       

      P.S. гарантии нет, информации где покупали нет (но точно не официально)
    • By Futura
      Имеется тазик на Debian c двумя сетевухами:
      Internet-eth0<NAT<eth1-PPPoE
      Если установить еще одну карточку (пусть будет eth2) c резервным каналом
      как организовать автоматическое переключение при падении основного и корректную работу NAT?
    • By sery_volk_inc
      Подскажите, что может быть за ошибка ONU:
      Mar  1 21:06:15 HAL: set onu port policy failed: rc = -5, onu_rv=0 Mar  1 21:06:15 %OLT: Config ONU on interface EPON0/1:12 failed for 1 times, must deregister it!  Конфиг ONU, который к ней применяется (работает на большом зоопарке других ONU):
      epon onu-config-template T1 cmd-sequence 1 epon onu port 1 ctc loopback detect cmd-sequence 2 epon onu port 1 storm-control mode 1 threshold 256 cmd-sequence 3 epon sla upstream pir 1000000 cir 15360 cmd-sequence 4 epon sla downstream pir 1000000 cir 15360 cmd-sequence 5 epon onu port 1 ctc rate-limit 1000000 ingress cmd-sequence 6 epon onu port 1 ctc rate-limit 1000000 egress  
      Естественно, она после этого отваливается, причем возникает эта ошибка не каждый раз. Дефектная что ли?
    • By Brandcomputers
      Доброго здоровячка всем. Попали в руки несколько дисков HITACHI HUC106060CSS600,
       

       
      контроллером HP E200 детектятся но при попытке создания рейда ошибка Command: 12H , SCSI status: 0000h (на фото ) ,

      на DELL perc 6 : Failed the verify  (на  фото ),

       
       
      долго не мог понять в чём дело , как оказалось читаются отлично ,но при записи выдают ошибку, создаётся впечатление о включеной защите записи . Возможно кто-то сталкивался с подобным ?
    • By fet4
      Приветствую!
      Подскажите сыпет вот такое в лог и система доступна только для чтения. Я так понял мрет диск, ssd стоит?
      Feb 10 11:05:08 srv-bill kernel: [ 549.009768] ata2.00: exception Emask 0x10 SAct 0x700 SErr 0x400100 action 0x6 frozen Feb 10 11:05:08 srv-bill kernel: [ 549.009796] ata2.00: irq_stat 0x08000000, interface fatal error Feb 10 11:05:08 srv-bill kernel: [ 549.009812] ata2: SError: { UnrecovData Handshk } Feb 10 11:05:08 srv-bill kernel: [ 549.009827] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:08 srv-bill kernel: [ 549.009844] ata2.00: cmd 61/40:40:00:d8:52/05:00:00:00:00/40 tag 8 ncq 688128 out Feb 10 11:05:08 srv-bill kernel: [ 549.009844] res 40/00:50:80:e2:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:08 srv-bill kernel: [ 549.009882] ata2.00: status: { DRDY } Feb 10 11:05:08 srv-bill kernel: [ 549.009893] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:08 srv-bill kernel: [ 549.009917] ata2.00: cmd 61/40:48:40:dd:52/05:00:00:00:00/40 tag 9 ncq 688128 out Feb 10 11:05:08 srv-bill kernel: [ 549.009917] res 40/00:50:80:e2:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:08 srv-bill kernel: [ 549.009957] ata2.00: status: { DRDY } Feb 10 11:05:08 srv-bill kernel: [ 549.009969] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:08 srv-bill kernel: [ 549.009984] ata2.00: cmd 61/80:50:80:e2:52/05:00:00:00:00/40 tag 10 ncq 720896 out Feb 10 11:05:08 srv-bill kernel: [ 549.009984] res 40/00:50:80:e2:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:08 srv-bill kernel: [ 549.010032] ata2.00: status: { DRDY } Feb 10 11:05:08 srv-bill kernel: [ 549.010045] ata2: hard resetting link Feb 10 11:05:08 srv-bill kernel: [ 549.333504] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Feb 10 11:05:08 srv-bill kernel: [ 549.344451] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:08 srv-bill kernel: [ 549.344468] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:08 srv-bill kernel: [ 549.364345] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:08 srv-bill kernel: [ 549.364349] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:08 srv-bill kernel: [ 549.374424] ata2.00: configured for UDMA/133 Feb 10 11:05:08 srv-bill kernel: [ 549.374446] ata2: EH complete Feb 10 11:05:08 srv-bill kernel: [ 549.381458] ata2.00: exception Emask 0x10 SAct 0x3800 SErr 0x400100 action 0x6 frozen Feb 10 11:05:08 srv-bill kernel: [ 549.381484] ata2.00: irq_stat 0x08000000, interface fatal error Feb 10 11:05:08 srv-bill kernel: [ 549.382155] ata2: SError: { UnrecovData Handshk } Feb 10 11:05:08 srv-bill kernel: [ 549.382830] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:08 srv-bill kernel: [ 549.383504] ata2.00: cmd 61/80:58:80:e2:52/05:00:00:00:00/40 tag 11 ncq 720896 out Feb 10 11:05:08 srv-bill kernel: [ 549.383504] res 40/00:68:00:d8:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:08 srv-bill kernel: [ 549.384843] ata2.00: status: { DRDY } Feb 10 11:05:08 srv-bill kernel: [ 549.385520] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:08 srv-bill kernel: [ 549.386238] ata2.00: cmd 61/40:60:40:dd:52/05:00:00:00:00/40 tag 12 ncq 688128 out Feb 10 11:05:08 srv-bill kernel: [ 549.386238] res 40/00:68:00:d8:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:08 srv-bill kernel: [ 549.387582] ata2.00: status: { DRDY } Feb 10 11:05:08 srv-bill kernel: [ 549.388249] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:08 srv-bill kernel: [ 549.388934] ata2.00: cmd 61/40:68:00:d8:52/05:00:00:00:00/40 tag 13 ncq 688128 out Feb 10 11:05:08 srv-bill kernel: [ 549.388934] res 40/00:68:00:d8:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:08 srv-bill kernel: [ 549.390268] ata2.00: status: { DRDY } Feb 10 11:05:08 srv-bill kernel: [ 549.390959] ata2: hard resetting link Feb 10 11:05:08 srv-bill kernel: [ 549.709195] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Feb 10 11:05:08 srv-bill kernel: [ 549.720088] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:08 srv-bill kernel: [ 549.720093] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:08 srv-bill kernel: [ 549.740031] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:08 srv-bill kernel: [ 549.740035] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:09 srv-bill kernel: [ 549.750094] ata2.00: configured for UDMA/133 Feb 10 11:05:09 srv-bill kernel: [ 549.750115] ata2: EH complete Feb 10 11:05:09 srv-bill kernel: [ 549.757177] ata2.00: exception Emask 0x10 SAct 0x1c000 SErr 0x400100 action 0x6 frozen Feb 10 11:05:09 srv-bill kernel: [ 549.757928] ata2.00: irq_stat 0x08000000, interface fatal error Feb 10 11:05:09 srv-bill kernel: [ 549.758665] ata2: SError: { UnrecovData Handshk } Feb 10 11:05:09 srv-bill kernel: [ 549.759403] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:09 srv-bill kernel: [ 549.760148] ata2.00: cmd 61/40:70:00:d8:52/05:00:00:00:00/40 tag 14 ncq 688128 out Feb 10 11:05:09 srv-bill kernel: [ 549.760148] res 40/00:80:80:e2:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:09 srv-bill kernel: [ 549.761810] ata2.00: status: { DRDY } Feb 10 11:05:09 srv-bill kernel: [ 549.762609] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:09 srv-bill kernel: [ 549.763399] ata2.00: cmd 61/40:78:40:dd:52/05:00:00:00:00/40 tag 15 ncq 688128 out Feb 10 11:05:09 srv-bill kernel: [ 549.763399] res 40/00:80:80:e2:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:09 srv-bill kernel: [ 549.764931] ata2.00: status: { DRDY } Feb 10 11:05:09 srv-bill kernel: [ 549.765663] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:09 srv-bill kernel: [ 549.766402] ata2.00: cmd 61/80:80:80:e2:52/05:00:00:00:00/40 tag 16 ncq 720896 out Feb 10 11:05:09 srv-bill kernel: [ 549.766402] res 40/00:80:80:e2:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:09 srv-bill kernel: [ 549.767760] ata2.00: status: { DRDY } Feb 10 11:05:09 srv-bill kernel: [ 549.768495] ata2: hard resetting link Feb 10 11:05:09 srv-bill kernel: [ 550.084889] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 320) Feb 10 11:05:09 srv-bill kernel: [ 550.095786] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:09 srv-bill kernel: [ 550.095792] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:09 srv-bill kernel: [ 550.115742] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:09 srv-bill kernel: [ 550.115747] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:09 srv-bill kernel: [ 550.125761] ata2.00: configured for UDMA/133 Feb 10 11:05:09 srv-bill kernel: [ 550.125774] ata2: EH complete Feb 10 11:05:09 srv-bill kernel: [ 550.132849] ata2: limiting SATA link speed to 1.5 Gbps Feb 10 11:05:09 srv-bill kernel: [ 550.132853] ata2.00: exception Emask 0x10 SAct 0xe0000 SErr 0x400100 action 0x6 frozen Feb 10 11:05:09 srv-bill kernel: [ 550.133572] ata2.00: irq_stat 0x08000000, interface fatal error Feb 10 11:05:09 srv-bill kernel: [ 550.134256] ata2: SError: { UnrecovData Handshk } Feb 10 11:05:09 srv-bill kernel: [ 550.134919] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:09 srv-bill kernel: [ 550.135585] ata2.00: cmd 61/80:88:80:e2:52/05:00:00:00:00/40 tag 17 ncq 720896 out Feb 10 11:05:09 srv-bill kernel: [ 550.135585] res 40/00:98:00:d8:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:09 srv-bill kernel: [ 550.136969] ata2.00: status: { DRDY } Feb 10 11:05:09 srv-bill kernel: [ 550.137743] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:09 srv-bill kernel: [ 550.138420] ata2.00: cmd 61/40:90:40:dd:52/05:00:00:00:00/40 tag 18 ncq 688128 out Feb 10 11:05:09 srv-bill kernel: [ 550.138420] res 40/00:98:00:d8:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:09 srv-bill kernel: [ 550.139801] ata2.00: status: { DRDY } Feb 10 11:05:09 srv-bill kernel: [ 550.140470] ata2.00: failed command: WRITE FPDMA QUEUED Feb 10 11:05:09 srv-bill kernel: [ 550.141157] ata2.00: cmd 61/40:98:00:d8:52/05:00:00:00:00/40 tag 19 ncq 688128 out Feb 10 11:05:09 srv-bill kernel: [ 550.141157] res 40/00:98:00:d8:52/00:00:00:00:00/40 Emask 0x10 (ATA bus error) Feb 10 11:05:09 srv-bill kernel: [ 550.142566] ata2.00: status: { DRDY } Feb 10 11:05:09 srv-bill kernel: [ 550.143236] ata2: hard resetting link Feb 10 11:05:11 srv-bill kernel: [ 552.355021] ata2: SATA link down (SStatus 1 SControl 310) Feb 10 11:05:11 srv-bill kernel: [ 552.373873] ata2: hard resetting link Feb 10 11:05:13 srv-bill kernel: [ 554.585189] ata2: SATA link down (SStatus 1 SControl 310) Feb 10 11:05:13 srv-bill kernel: [ 554.592077] ata2: hard resetting link Feb 10 11:05:16 srv-bill kernel: [ 556.803367] ata2: SATA link down (SStatus 1 SControl 310) Feb 10 11:05:16 srv-bill kernel: [ 556.803374] ata2.00: disabled Feb 10 11:05:16 srv-bill kernel: [ 556.811354] ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen t4 Feb 10 11:05:16 srv-bill kernel: [ 556.812812] ata2: irq_stat 0x00000040, connection status changed Feb 10 11:05:16 srv-bill kernel: [ 556.813762] ata2: SError: { CommWake DevExch } Feb 10 11:05:16 srv-bill kernel: [ 556.814813] ata2: hard resetting link Feb 10 11:05:16 srv-bill kernel: [ 557.534767] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Feb 10 11:05:16 srv-bill kernel: [ 557.545661] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:16 srv-bill kernel: [ 557.545665] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:16 srv-bill kernel: [ 557.549309] ata2.00: ATA-9: INTEL SSDSC2BW120A4, DC32, max UDMA/133 Feb 10 11:05:16 srv-bill kernel: [ 557.549311] ata2.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA Feb 10 11:05:16 srv-bill kernel: [ 557.565604] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20140926/psargs-359) Feb 10 11:05:16 srv-bill kernel: [ 557.565608] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT1._GTF] (Node ffff88011e8442c0), AE_NOT_FOUND (20140926/psparse-536) Feb 10 11:05:16 srv-bill kernel: [ 557.575636] ata2.00: configured for UDMA/133 Feb 10 11:05:16 srv-bill kernel: [ 557.575649] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.575651] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Feb 10 11:05:16 srv-bill kernel: [ 557.575652] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.575653] Sense Key : Aborted Command [current] [descriptor] Feb 10 11:05:16 srv-bill kernel: [ 557.575655] Descriptor sense data with sense descriptors (in hex): Feb 10 11:05:16 srv-bill kernel: [ 557.575656] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Feb 10 11:05:16 srv-bill kernel: [ 557.575662] 00 52 d8 00 Feb 10 11:05:16 srv-bill kernel: [ 557.575664] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.575666] Add. Sense: No additional sense information Feb 10 11:05:16 srv-bill kernel: [ 557.575667] sd 1:0:0:0: [sda] CDB: Feb 10 11:05:16 srv-bill kernel: [ 557.575669] Write(10): 2a 00 00 52 e2 80 00 05 80 00 Feb 10 11:05:16 srv-bill kernel: [ 557.575674] blk_update_request: I/O error, dev sda, sector 5431936 Feb 10 11:05:16 srv-bill kernel: [ 557.576678] EXT4-fs warning (device dm-0): ext4_end_bio:317: I/O error -5 writing to inode 6424068 (offset 0 size 0 starting block 191056) Feb 10 11:05:16 srv-bill kernel: [ 557.576681] Buffer I/O error on device dm-0, logical block 191056 Feb 10 11:05:16 srv-bill kernel: [ 557.577988] Buffer I/O error on device dm-0, logical block 191057 Feb 10 11:05:16 srv-bill kernel: [ 557.579142] Buffer I/O error on device dm-0, logical block 191058 Feb 10 11:05:16 srv-bill kernel: [ 557.580015] Buffer I/O error on device dm-0, logical block 191059 Feb 10 11:05:16 srv-bill kernel: [ 557.580667] Buffer I/O error on device dm-0, logical block 191060 Feb 10 11:05:16 srv-bill kernel: [ 557.581303] Buffer I/O error on device dm-0, logical block 191061 Feb 10 11:05:16 srv-bill kernel: [ 557.581943] Buffer I/O error on device dm-0, logical block 191062 Feb 10 11:05:16 srv-bill kernel: [ 557.582604] Buffer I/O error on device dm-0, logical block 191063 Feb 10 11:05:16 srv-bill kernel: [ 557.583277] Buffer I/O error on device dm-0, logical block 191064 Feb 10 11:05:16 srv-bill kernel: [ 557.583928] Buffer I/O error on device dm-0, logical block 191065 Feb 10 11:05:16 srv-bill kernel: [ 557.584562] EXT4-fs warning (device dm-0): ext4_end_bio:317: I/O error -5 writing to inode 6424068 (offset 0 size 0 starting block 191224) Feb 10 11:05:16 srv-bill kernel: [ 557.584572] sd 1:0:0:0: rejecting I/O to offline device Feb 10 11:05:16 srv-bill kernel: [ 557.585164] sd 1:0:0:0: [sda] killing request Feb 10 11:05:16 srv-bill kernel: [ 557.585173] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.585174] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Feb 10 11:05:16 srv-bill kernel: [ 557.585175] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.585175] Sense Key : Aborted Command [current] [descriptor] Feb 10 11:05:16 srv-bill kernel: [ 557.585176] Descriptor sense data with sense descriptors (in hex): Feb 10 11:05:16 srv-bill kernel: [ 557.585177] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Feb 10 11:05:16 srv-bill kernel: [ 557.585181] 00 52 d8 00 Feb 10 11:05:16 srv-bill kernel: [ 557.585182] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.585183] Add. Sense: No additional sense information Feb 10 11:05:16 srv-bill kernel: [ 557.585184] sd 1:0:0:0: [sda] CDB: Feb 10 11:05:16 srv-bill kernel: [ 557.585185] Write(10): 2a 00 00 52 dd 40 00 05 40 00 Feb 10 11:05:16 srv-bill kernel: [ 557.585188] blk_update_request: I/O error, dev sda, sector 5430592 Feb 10 11:05:16 srv-bill kernel: [ 557.585775] EXT4-fs warning (device dm-0): ext4_end_bio:317: I/O error -5 writing to inode 6424068 (offset 0 size 0 starting block 190888) Feb 10 11:05:16 srv-bill kernel: [ 557.585818] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.585819] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Feb 10 11:05:16 srv-bill kernel: [ 557.585820] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.585820] Sense Key : Aborted Command [current] [descriptor] Feb 10 11:05:16 srv-bill kernel: [ 557.585821] Descriptor sense data with sense descriptors (in hex): Feb 10 11:05:16 srv-bill kernel: [ 557.585822] 72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 Feb 10 11:05:16 srv-bill kernel: [ 557.585825] 00 52 d8 00 Feb 10 11:05:16 srv-bill kernel: [ 557.585827] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.585828] Add. Sense: No additional sense information Feb 10 11:05:16 srv-bill kernel: [ 557.585828] sd 1:0:0:0: [sda] CDB: Feb 10 11:05:16 srv-bill kernel: [ 557.585829] Write(10): 2a 00 00 52 d8 00 00 05 40 00 Feb 10 11:05:16 srv-bill kernel: [ 557.585832] blk_update_request: I/O error, dev sda, sector 5429248 Feb 10 11:05:16 srv-bill kernel: [ 557.586414] EXT4-fs warning (device dm-0): ext4_end_bio:317: I/O error -5 writing to inode 6424068 (offset 0 size 0 starting block 190720) Feb 10 11:05:16 srv-bill kernel: [ 557.586496] ata2: EH complete Feb 10 11:05:16 srv-bill kernel: [ 557.586509] sd 1:0:0:0: [sda] Feb 10 11:05:16 srv-bill kernel: [ 557.586510] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK Feb 10 11:05:16 srv-bill kernel: [ 557.586512] sd 1:0:0:0: [sda] CDB: Feb 10 11:05:16 srv-bill kernel: [ 557.586513] Write(10): 2a 00 07 02 e2 98 00 00 b0 00 Feb 10 11:05:16 srv-bill kernel: [ 557.586517] blk_update_request: I/O error, dev sda, sector 117629592 Feb 10 11:05:16 srv-bill kernel: [ 557.587123] sd 1:0:0:0: rejecting I/O to offline device
×