ESP 7 Posted 2012-07-04 14:20:04 Share Posted 2012-07-04 14:20:04 Приветствую. Прошу помощи у товарищей, в настройке BGP между Алкателем 6850 и Каталистом 6500 Конфиги впринципе стандартные, но сессия рвется при анонсировании маршрутов с циски Алкател ip load bgp ip bgp autonomous-system 65545 ip bgp log-neighbor-changes ip bgp neighbor 192.21.240.1 ip bgp neighbor 192.21.240.1 remote-as 65545 ip bgp neighbor 192.21.240.1 description "--- Direct ---" ip bgp neighbor 192.21.240.1 status enable Циски конфиг стандартен, анонсирую дефолт neighbor 192.21.240.28 default-originate В логе циски Jul 4 11:52:44: %SYS-5-CONFIG_I: Configured from console by west onvty0 (172.20.0.11) Jul 4 11:52:58: %BGP-5-ADJCHANGE: neighbor 192.21.240.28 Up Jul 4 11:53:00: %BGP-3-NOTIFICATION: received from neighbor 192.21.240.28 6/1 (cease) 0 bytes Jul 4 11:53:00: %BGP-5-ADJCHANGE: neighbor 192.21.240.28 Down BGP Notification received Гугл говорит что ошибка эта возникает в случае переполнения ТКАМ памяти пира. Я анонсирую с циски только дефолт Link to post Share on other sites
OKyHb 8 Posted 2012-07-04 18:17:09 Share Posted 2012-07-04 18:17:09 Если б анонсился не только дефолт, можно было б предположить, что срабатывает дефолтное ограничение на 5к префиксов (ip bgp neighbor maximum-prefix). Но не тот случай ( Link to post Share on other sites
Nurlan 0 Posted 2012-07-09 12:33:15 Share Posted 2012-07-09 12:33:15 Добрый день! Мне нужно новое оборудование ALCATEL-LUCENT По приемлемой цене!!!!! OS6850EP48 Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 44 RJ-45 10/100/1000 BaseT PoE ports, 4 combo ports (10/100/1000 BaseT or 1000 BaseX), and 2 CX-4 ports. The 2 CX-4 ports can be used as stacking ports or as connectors for the OS6-XNI-U2 that supports 2 SFP+ 10GigE ports. The bundle includes a 360W AC PoE power supply with power shelf and country specific power cord,user manuals access card, rack mounts, and RJ-45 to DB-9 adaptor. 5-шт OS6850EP24X Gigabit Ethernet L3 fixed configuration chassis in a 1U form factor with 20 RJ-45 10/100/1000 BaseT PoE ports, 4 combo ports (10/100/1000 BaseT or 1000 BaseX), 2 SFP+ 10GigE ports, and 2 CX-4 ports. The 2 CX-4 ports can be used as stacking ports or as connectors for the OS6-XNI-U2 that supports 2 SFP+ 10GigE ports. The bundle includes a 360W AC PoE power supply with power shelf and country specific power cord,user manuals access card, rack mounts, and RJ-45 to DB-9 adaptor. 2-шт По всем вопросам, просьба отписать на Wasage@mail.ru + 7 701 732 26 25 Дархан + 7 701 558 01 17 Нурлан Link to post Share on other sites
saviokmua 0 Posted 2012-07-24 12:02:41 Share Posted 2012-07-24 12:02:41 Вопрос по Alcatel-Lucent OS-6850 Есть ли аналог cisco-команды? show ip bgp neighbors xxx.xxx.xxx.xxx advertised-routes show ip bgp neighbors xxx.xxx.xxx.xxx received-routes в документации не смог найти Link to post Share on other sites
bit 59 Posted 2012-07-24 13:22:50 Share Posted 2012-07-24 13:22:50 show ip bgp path neighbor-adv <ipv4Addr> show ip bgp path neighbor-rcv <ipv4Addr> Link to post Share on other sites
saviokmua 0 Posted 2012-07-26 06:29:12 Share Posted 2012-07-26 06:29:12 show ip bgp path neighbor-adv <ipv4Addr> show ip bgp path neighbor-rcv <ipv4Addr> Большое спасибо!!! Link to post Share on other sites
saviokmua 0 Posted 2012-07-27 11:32:23 Share Posted 2012-07-27 11:32:23 Еще один вопрос касательно комьюнити В quagga'е, посмотреть "разукрашенные" маршруты через community можно так show ip bgp community 28681:100 В доке на OS6850 все что касается show и community есть только show ip bgp policy community-list NAMELIST но это не то. Link to post Share on other sites
saviokmua 0 Posted 2012-07-27 13:08:24 Share Posted 2012-07-27 13:08:24 туплю show ip bgp path community Link to post Share on other sites
saviokmua 0 Posted 2012-07-27 14:10:34 Share Posted 2012-07-27 14:10:34 Еще один глупый вопрос с моей стороны. День просидел, но не сдвинулся с места.... Как раскрасить принятые маршруты с помощью community? Link to post Share on other sites
saviokmua 0 Posted 2012-07-28 14:04:50 Share Posted 2012-07-28 14:04:50 вопрос по прежнему актуален Link to post Share on other sites
saviokmua 0 Posted 2012-08-02 14:30:31 Share Posted 2012-08-02 14:30:31 Так, с этим разобрался. (Комьюнити работает, не верно составлял роутмапы....) Теперь стала проблема со снятием статистики с ip interfaces. В SNMP присутствуют счетчики для интерфейсов, но они ровны нулю. С портов статистику получаю, а вот кто как мониторит ip interface созданный на коммутаторе? Link to post Share on other sites
netrider 0 Posted 2012-08-21 21:57:47 Share Posted 2012-08-21 21:57:47 Прошу помощи в настройке bgp Вроде все настроил, но сеть не активна, анонс не идет От провайдера получаю дефолтовый анонс После применения всех правил перестаю даже его получать Идеально бы какой-то пример, чтобы сделать по аналогии, а то с мануала официального толку для меня мало Link to post Share on other sites
Daniil_ 10 Posted 2012-10-16 18:41:32 Share Posted 2012-10-16 18:41:32 Так, с этим разобрался. (Комьюнити работает, не верно составлял роутмапы....) а можно подробнее, как заставили работать community ? ip bgp policy community-list paritets 43:1000 ip bgp policy community-list paritets 43:1000 action permit ip bgp policy community-list paritets 43:1000 status enable ip bgp policy route-map paritets-in 10 ip bgp policy route-map paritets-in 10 community-list paritets ip bgp neighbor x.x.x.x route-map paritets-in in > show ip bgp policy community-list paritets Community List name = paritets Community string = 43:1000 Admin state = enabled, Match type = exact, Priority = 1, Action = permit, Primary index = 1 -> show ip bgp policy route-map paritets-in RouteMap name = paritets-in RouteMap instance = 10 Admin state = enabled, Local preference (mode/value) = <none> / 0, Route map action = permit, Origin = <none>, MED (mode/value) = <none> / 0, Weight = 0, Aspath-List name = <none>, Aspath prepend = <none>, Aspath match primitive = <none>, Prefix-List name = <none>, Prefix match primitive = 255.255.255.255 255.255.255.255, Community-List name = paritets, Community match primitive = <none>, Community string [mode] = none [Additive] что не хватает? Link to post Share on other sites
saviokmua 0 Posted 2012-10-16 18:49:27 Share Posted 2012-10-16 18:49:27 Задаю комьюнити так ip bgp policy route-map UARNET-IN 10 ip bgp policy route-map UARNET-IN 10 lpref 300 ip bgp policy route-map UARNET-IN 10 lpref-mode rep ip bgp policy route-map UARNET-IN 10 community-mode replace ip bgp policy route-map UARNET-IN 10 community 25132:100 ip bgp policy route-map UARNET-IN 10 match-prefix 0.0.0.0 ip bgp policy route-map UARNET-IN 10 match-mask 0.0.0.0 ip bgp policy route-map UARNET-IN 10 status enable проверяю на комьюнити так ip bgp policy route-map UANG-OUT 45 ip bgp policy route-map UANG-OUT 45 match-community 49204:105 ip bgp policy route-map UANG-OUT 45 status enable Link to post Share on other sites
Daniil_ 10 Posted 2012-10-16 19:21:50 Share Posted 2012-10-16 19:21:50 А пробовали объединять 2 набора префиксов? например 2 разных uaix+ паритеты? Link to post Share on other sites
saviokmua 0 Posted 2012-10-16 19:22:58 Share Posted 2012-10-16 19:22:58 нет Link to post Share on other sites
a.ndrey 0 Posted 2016-06-09 20:34:33 Share Posted 2016-06-09 20:34:33 Приветствую, заранее благодарен за помощь. Необходимо принять префикс, порожденный в той же AS. Есть ли на 6850e функционал аналогичный цисковскому Allowas-in? Link to post Share on other sites
OKyHb 8 Posted 2016-06-10 14:42:53 Share Posted 2016-06-10 14:42:53 "as-override" на промежуточном оборудовании - не вариант? Link to post Share on other sites
Shuher 216 Posted 2016-06-11 23:16:10 Share Posted 2016-06-11 23:16:10 Доброго дня! Нужно принять 3 дефолта на 6850-U24X Кто-нить может поделиться примером конфига? Link to post Share on other sites
philippe46 12 Posted 2016-06-12 09:06:18 Share Posted 2016-06-12 09:06:18 Как он себя будет чувствовать с 2* uaix ? Должен всосать. Там на RS сейчас 16K маршрутов где-то. Link to post Share on other sites
KaYot 3,732 Posted 2016-06-12 09:49:21 Share Posted 2016-06-12 09:49:21 Должен всосать. Какой мощный некропост. Уж помог так помог. Link to post Share on other sites
Shuher 216 Posted 2016-06-12 16:57:11 Share Posted 2016-06-12 16:57:11 Так, а дефолт приёму? Link to post Share on other sites
Shuher 216 Posted 2016-07-28 21:20:25 Share Posted 2016-07-28 21:20:25 (edited) поделить плиз примером конфига BGP на 6850 алькательке плиззз а также пример route-map и prefix-list Edited 2016-07-28 21:26:12 by Shuher Link to post Share on other sites
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now